01-22-2013, 11:04 AM | #1 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Blackwell Axles
Hey guys, new to the scale rigs but not to RC..I recently picked up a project that is using Blackwell axles and R2 Heavy Duty tranny...I was wondering how sum of you guys are setting up steering? and also what driveshafts are you guys using? Ive seen the Junfac Carbon Steel shafts and the Punisher Shafts, not sure which one would be better...any help is greatly appreciated guys, thanks in advance for the help... Here is a sneak peak at the project... Last edited by Kingclod27; 01-25-2013 at 07:18 AM. |
Sponsored Links | |
01-22-2013, 01:01 PM | #2 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
I know this doesn't answer your question, but I think I know what it is!
Last edited by scorpiondave; 01-23-2013 at 07:10 PM. |
01-22-2013, 01:08 PM | #3 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
Oh now you've got my attention big time! Going to be great! Subscribed.
Last edited by scorpiondave; 01-23-2013 at 07:10 PM. |
01-22-2013, 01:15 PM | #4 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
Yea got something cool instore for ya!
|
01-22-2013, 01:16 PM | #5 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
Can't wait my friend!
|
01-22-2013, 01:18 PM | #6 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
I just need to figure out a set of driveshafts and how I will do steering...never worked with these axles before
|
01-22-2013, 01:21 PM | #7 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
Have you looked into MIP's?
|
01-22-2013, 01:53 PM | #8 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
I was looking at these 2 options..hadnt looked at MIPs yet... Scale Steel Punisher Shaft (100-135mm) 5mm Gmade Hardened Universal Shaft for Gmade R1 Rock Buggy Set |
01-22-2013, 01:55 PM | #9 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
For steering you may have to go CMS. Fab your own brackets to mount the servo on the chassis.
|
01-22-2013, 07:47 PM | #10 |
Quarry Creeper Join Date: Apr 2009 Location: San Diego,CA
Posts: 348
| Re: Blackwell Axles
I made a bracket that bolts to the knuckle to change the steering input direction then I added the chassis mounted servo. |
01-22-2013, 08:15 PM | #11 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
Thanks sellenk...The chassis has servo mounts built into the frame similar to yours so I can do something similar to that. Last edited by Kingclod27; 01-25-2013 at 07:21 AM. |
01-25-2013, 07:09 AM | #12 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
Im think I found a solution to the steering issue, and I think Im going with the Punisher Steel shafts, I just need to make sum measurements. I also got a set of XVDs for the axles, Can anyone post a link to reverse the rotation of the axles? |
01-25-2013, 07:48 AM | #13 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
This should be it: HOW TO: Reverse Direction in Blackwell Axles - RC4WD Forums |
01-25-2013, 08:10 AM | #14 | |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles Quote:
| |
01-25-2013, 08:11 AM | #15 |
Quarry Creeper Join Date: Sep 2008 Location: Fab Shop
Posts: 497
| Re: Blackwell Axles
Just register then you'll be able to view the pics.
|
01-25-2013, 10:01 AM | #16 |
www.ottsix.com Join Date: Mar 2011 Location: Albuquerque, New Mexico USA
Posts: 2,050
| Re: Blackwell Axles
I think the Punishers are much more scale looking.
|
01-25-2013, 10:04 AM | #17 |
www.ottsix.com Join Date: Mar 2011 Location: Albuquerque, New Mexico USA
Posts: 2,050
| Re: Blackwell Axles |
01-25-2013, 10:42 AM | #18 |
RCC Addict Join Date: Jun 2011 Location: Lindsborg
Posts: 1,708
| Re: Blackwell Axles
I have the Carbons on my rig, I was not impressed with the "D" shapped shaft , But they slide smooth and so far do not show a lot of wear. The ball and cups are well made and the "C" clip is nice and heavy duty.
|
01-25-2013, 10:42 AM | #19 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
Here is the build thread for the project... Something Brewing... |
02-22-2013, 07:22 AM | #20 |
Quarry Creeper Join Date: Nov 2012 Location: Richmond
Posts: 275
| Re: Blackwell Axles
Does anyone else have a guide to reverse the blackwell axles? The link that someone posted in this thread doesnt show the pics...thanks guys
|
Tags |
blackwell, monster truck, rc4wd |
Blackwell Axles - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blackwell Axles | GravelDuster | Axial SCX-10 | 0 | 11-29-2012 11:09 AM |
Blackwell Axles | SCORPIAN670 | General Scale Talk | 1 | 05-16-2011 12:10 PM |
| |