|
| LinkBack | Thread Tools | Display Modes |
07-23-2016, 12:32 AM | #1 |
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Another Rookie Scratch build V2.0
Well, we knew this would happen. Ya build one tiny truck, ya gotta build another. I was going to build an RC4WD Blazer based tow truck. After a few adult beverages, I decided to go another route. As usual, I scoured the interwebs, and found a decent profile. Not the "correct" truck, but it'll do. SOP at this point, paste the drawing, cut it out....TO THE BANDSAW!!! and I sanded... ...and made a few pieces to hold them apart... Made a roof... the coolest way I've found to transfer lines, is with a compass... Before we get too far, WILL IT WORK? I need some inspiration!! Bored with the front. Let's start with the rear for a minute... Better shot of my rear end. "Do these duals make my rear look big??" here's two for the road... The "grill" is not glued. Just two-sided-taped into place. I'm waiting for material before I go down "permanent" street. But, I think it's close enough for now... CHEERS!! |
Sponsored Links | |
07-23-2016, 09:18 AM | #2 |
Quarry Creeper Join Date: Jun 2015 Location: Petaluma, Ca
Posts: 237
| Re: Another Rookie Scratch build V2.0
That is some great fab work. This is looking good will be following the build. Like to see what accessories you will be adding for scale.
|
07-23-2016, 11:06 PM | #3 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: Another Rookie Scratch build V2.0
Great start!
|
07-24-2016, 09:22 AM | #4 |
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Re: Another Rookie Scratch build V2.0
Thanks rere and mike. I'm not sure about accessories just yet. Well, thanks to "Lasership" I have no styrene for the weekend. No styrene, no printer filament, no light buckets... They say "delivery was attempted." I call shenanigans. I was home all day, and outside most of the day. No one even "attempted" to come down my driveway. I'm a little miffed....(can you tell??) Rant over, on with the show. I focused mainly on the rear. I made the inner fender/wheel wells, and started to cover the rear shock towers. Made the rear "bumper" and front-of-the-fender steps. (I took a few artistic liberties) Reinforced the crap outta the bottom side of the wrecker box. |
07-24-2016, 03:42 PM | #5 |
Rock Crawler Join Date: Jun 2015 Location: In the Sticks in the Ozarks
Posts: 940
| Re: Another Rookie Scratch build V2.0
Very nice styrene work! Good lookin' rig. |
07-24-2016, 07:09 PM | #6 |
Rock Crawler Join Date: May 2005 Location: Fort Wayne
Posts: 728
| Re: Another Rookie Scratch build V2.0
Wow that is some very impressive styrene work! Even at this stage it looks absolutely fantastic!
|
07-24-2016, 07:21 PM | #7 |
I wanna be Dave Join Date: Jul 2010 Location: Toronto
Posts: 2,389
| Re: Another Rookie Scratch build V2.0
Can't be styrene, too thick! Komacel? Very nice build, impressive skills.
|
07-25-2016, 03:23 AM | #8 |
RCC Addict Join Date: Mar 2013 Location: Commerce Township
Posts: 1,594
| Re: Another Rookie Scratch build V2.0
That is a bad azz build, amazing skills, and for your second attempt, very straight and the lines are spot on!
|
07-25-2016, 06:17 PM | #9 |
I wanna be Dave Join Date: Apr 2009 Location: Unnecessary Surgery Land
Posts: 3,406
| Re: Another Rookie Scratch build V2.0
Awesome start! What thickness of material is that? Heavy duty looking stuff!
|
07-25-2016, 08:03 PM | #10 |
Newbie Join Date: Jul 2015 Location: RVA
Posts: 29
| Re: Another Rookie Scratch build V2.0
Looking great so far! Another awesome build
|
07-26-2016, 01:13 AM | #11 | |||
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Re: Another Rookie Scratch build V2.0 Quote:
Quote:
Finally got some styrene for the details... Quote:
oh, just wait... I had some cool pics to post, but Photobucket wants to be a [insert adjective here] [insert noun here] ^^^just like this sentence, you'll have to use your imagination... | |||
07-26-2016, 09:34 AM | #12 |
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Re: Another Rookie Scratch build V2.0 |
07-26-2016, 08:12 PM | #13 |
I wanna be Dave Join Date: Apr 2013 Location: Streamwood, IL
Posts: 2,442
| Re: Another Rookie Scratch build V2.0
Rookie scratch build my a**, coming along well! How many mars/strobes are you planning?
|
07-27-2016, 03:13 AM | #14 | |
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Re: Another Rookie Scratch build V2.0 Quote:
So, I glued all the pieces for the grill.... but, now I can see through it!! That's no good. I decided to try one of those "Zip Tie" radiators things... ok....I like where this is going.... After a bit of paint....yeah, why not?? Well, it's super tough to take pics of a radiator in a tiny truck, nd get any detail.. Bummer. It looks better in person. ...stupid cameras.... The core support/radiator is taped in for now. But I can't see though it anymore. That makes me happy. | |
07-27-2016, 03:52 AM | #15 |
RCC Addict Join Date: Mar 2013 Location: Commerce Township
Posts: 1,594
| Re: Another Rookie Scratch build V2.0
Zip Tie radiator and trans cooler is very well done. May "borrow" that idea! Tow truck is coming along great....killer work, for 2.0 your skills are fun to watch!
|
07-27-2016, 01:59 PM | #16 |
I wanna be Dave Join Date: Feb 2009 Location: Detroit
Posts: 2,075
| Re: Another Rookie Scratch build V2.0
no rookie build here... looks like its fookin real man. nice job. this easier to work with than styrene?
|
07-27-2016, 02:47 PM | #17 |
Newbie Join Date: Feb 2006 Location: Ottawa Valley
Posts: 29
| Re: Another Rookie Scratch build V2.0
I love the shape of this cab. Great work & keep it up!
|
07-28-2016, 03:52 AM | #18 | ||
Quarry Creeper Join Date: Jul 2015 Location: Hanover
Posts: 209
| Re: Another Rookie Scratch build V2.0 Quote:
Quote:
BUT, I did find out that MEK will play nice with BOTH styrene AND Sintra... How cool is that??? Thanks... I'll see what I can do about the request for elevation. So I started off with the bumper... Because I wanted to mount the cab, err. something... But, I think I got distracted.... And took this pic. I don't remember why... So, I made this. I just couldn't stop... I took a few artistic liberties. It'll be ok. "Artists" are allowed such nonsense. Everyone loves a close up!!! More to come... Same bad time, same bad channel. ^if you got that joke....well... (you know) | ||
07-28-2016, 07:45 AM | #19 |
Quarry Creeper Join Date: Jun 2015 Location: Petaluma, Ca
Posts: 237
| Re: Another Rookie Scratch build V2.0
That boom detail is great looks like a real tow truck. Great work all around. I second the reply that this is no rookie build your work is very well done.
|
07-28-2016, 11:39 AM | #20 |
No idea what I'm doing Join Date: Oct 2008 Location: Underground, CO
Posts: 4,529
| Re: Another Rookie Scratch build V2.0
You have some seriously Mad Skills! I'll be checking my local plastic outlet for Sintra. Then when I can't reproduce your quality, I'll light it on fire and bury it in the back yard. This stuff doesn't produce toxic smoke does it? |
Another Rookie Scratch build V2.0 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Rookie Scratch Build | HANgOVER Airbrush RC | General Scale Talk | 82 | 08-18-2016 08:39 AM |
Rookie Spawn Build | TheBigRigger122 | Axial Wraith | 48 | 04-09-2016 11:23 AM |
A rookie builds his first "from scratch" styrene body | Mud Puppy | General Scale Talk | 62 | 01-29-2015 09:12 AM |
My Rookie Build | Rokcrler | Axial AX-10 Scorpion | 7 | 05-29-2011 08:24 PM |
| |