02-15-2017, 02:40 PM | #1 |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Swb Redcat E10 scaler
I thought I'd share my build with the world since I couldn't find any info on this when I started. I started with a Redcat everest 10, nothing close to a scaler. After throwing ideas around I decided I was Gonna build a short wheel base crawler out of it. I order a STRC scx10 short wheel base kit, used axial crossmemebers and shock mounts with the everest transmission, axles, driveshafts and electronics. I started with tearing apart the redcat. Which was followed by assembling the STRC kit. The redcat links took a little muscle to fit in the axial mounts but worked. The transmission has 2 mounting holes that line up with the axial transmount. I'll drill another hole eventually. Used mostly the STRC links, front lowers are redcat uppers. To help with pinion angle. Cut and shortened the driveshafts. The axle link mounts all work with the kit, although I will be replacing the upper mounts with axial mounts in the future. Still a working progress. I'll post more as I go. Sent from my SAMSUNG-SM-G900A using Tapatalk Last edited by THX_138; 02-18-2017 at 01:37 AM. |
Sponsored Links | |
02-15-2017, 02:56 PM | #2 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,918
| Re: Swb Redcat E10 scaler
What size shocks are you running? They seem a little long to me
|
02-15-2017, 03:20 PM | #3 |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler |
02-15-2017, 03:55 PM | #4 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,918
| Re: Swb Redcat E10 scaler
Sounds like same length that the everest came with and those are long for it. Like the yj, I'm watching to see what you do with it. Last edited by hillbillyrc; 02-15-2017 at 06:39 PM. |
02-16-2017, 01:32 PM | #5 | |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler Quote:
I started chopping up the body since I'm going for the YJ on tons look, it's gonna be comp cut with flat fenders Sent from my SAMSUNG-SM-G900A using Tapatalk Last edited by THX_138; 02-18-2017 at 01:38 AM. | |
02-16-2017, 03:48 PM | #6 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,918
| Re: Swb Redcat E10 scaler
Might try a chassis mounted servo, but figuring out a panhard setup might be difficult. That's where I am with my everest axle build.
|
02-16-2017, 05:59 PM | #7 | |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler Quote:
Would do high steer knuckles for a scx10 too. Just need the knuckles and outer bearings Sent from my SAMSUNG-SM-G900A using Tapatalk | |
02-16-2017, 09:21 PM | #8 |
RCC Addict Join Date: Jan 2012 Location: Vancouver
Posts: 1,918
| Re: Swb Redcat E10 scaler
I believe also c-hubs, but not for sure. I've axialed my rear axle but haven't the front yet.
|
02-16-2017, 09:32 PM | #9 |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler
I believe the Cs work with the axial knuckles Sent from my SAMSUNG-SM-G900A using Tapatalk |
02-28-2017, 09:49 PM | #10 |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler
Did a little more work on it. Body painted and mounted Sent from my SAMSUNG-SM-G900A using Tapatalk |
03-15-2017, 10:48 AM | #11 |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler
Went on vacation but I got a little done to my crawler. I moved the battery, esc and receiver box to the front of the chassis. I need to replace the front axle housing as well. Broke the link/shock mount off Sent from my SAMSUNG-SM-G900A using Tapatalk |
03-29-2017, 06:38 PM | #12 |
Newbie Join Date: Aug 2016 Location: Townsville
Posts: 36
| Re: Swb Redcat E10 scaler
Nice work. We are starting an 80 series build on an e10 platform. It seems the easiest way to make the wheel wells line up with tires, is to shorten the links. It looks really long with the stock frame and 1.9 rims and associated tires. Sent from my iPad using Tapatalk |
04-05-2017, 11:35 AM | #13 | |
Newbie Join Date: Jan 2017 Location: US
Posts: 41
| Re: Swb Redcat E10 scaler Quote:
Sent from my SAMSUNG-SM-G900A using Tapatalk | |
05-13-2017, 08:29 AM | #14 |
Newbie Join Date: Aug 2016 Location: Townsville
Posts: 36
| Re: Swb Redcat E10 scaler
Installed 90 mm shocks and have the lowering kit from level3rc for adjustment. It seems like it's going to work. Shortening makes the tailshaft angles a tad nastier, but should be okay. Not going for land speed record with it. Sent from my iPad using Tapatalk |
Swb Redcat E10 scaler - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TF2 SWB, MST CMX, or STRC SCX10 SWB? | aver3 | General Crawlers | 2 | 11-22-2016 07:26 PM |
Redcat e10, scx10, wraith Frankenstein | Watkins8347 | Redcat Crawlers | 6 | 01-15-2016 11:16 AM |
Jeep Wrangler JK (SWB) ... 1st scaler | 4x4LOYR | Axial SCX-10 | 39 | 12-13-2010 05:41 AM |
| |