A new AXIAL

[Shinchu]

My father in law bent his yeti kit rear arms. They didn't go back.

If and when I get this, I will be looking for ti links and I know just where to get em.

This would be a fun rig for me, to upgrade like the budget series where I see a weakness. Just take my time and build it up as needed.
I hope somebody else makes some 3d printed goodies for it.
Those exclusive parts... Exclude me from those.
But I totally want a full interior with back seat. That was just enough to tease me lol

[Sneetches]

I had the RTR Deadbolt back when I started and that was probably enough for me. After only so many sessions the rear lowers started bending and whenever the rear end had any sort of traction, one side would bend and screw with the alignment. It was even worse when the tires got bound up because that meant for sure that link on the side of the tire would flex as much as possible.

[CM9000]

Goin for the scorpion crawler interior look? Bj's green cherokee.

Originally Posted by Shinchu

My father in law bent his yeti kit rear arms. They didn't go back.

If and when I get this, I will be looking for ti links and I know just where to get em.

This would be a fun rig for me, to upgrade like the budget series where I see a weakness. Just take my time and build it up as needed.
I hope somebody else makes some 3d printed goodies for it.
Those exclusive parts... Exclude me from those.
But I totally want a full interior with back seat. That was just enough to tease me lol

Sent from my LGMP260 using Tapatalk

[kincer]

The cvd comment was for somebody else. (Kincer i think)

Ok something better than dogbones then lol

[indybama]

Did we miss somethin here? This vid is from 9 months ago, but looks like a 'sneek peek' we all missed. It just came up on my youtube list as i was scrollin thru

https://youtu.be/6-h1vVAfRXk

Sent from my SM-J327VPP using Tapatalk

[roadrashracing]

Originally Posted by indybama

Did we miss somethin here? This vid is from 9 months ago, but looks like a 'sneek peek' we all missed. It just came up on my youtube list as i was scrollin thru

https://youtu.be/6-h1vVAfRXk

Sent from my SM-J327VPP using Tapatalk

That just came up the other day for me too.

[B-MOW71]

I do remember seeing that video awhile back. Never thought nothing of it. I remember thinking that was a good looking Spawn body.


Sent from my iPad using Tapatalk

[odomandr]

I too recall seeing it but the axles were maybe ax10 and it looked disproportionate at the time

[indybama]

I couldnt tell if they were the OG axles or the new ar44s with black diff covers. I do like the looks of that body though. Id like to have one, but like i said, ill wait til the hype cools off n see if the pruce drops a bit

Sent from my SM-J327VPP using Tapatalk

[CM9000]

OG ax10 axles.

Just watched the video.. the new 1.9 wraith would sure look sick with the old spawn body and the new front end.

[Teng]

Originally Posted by B-MOW71

I do remember seeing that video awhile back. Never thought nothing of it. I remember thinking that was a good looking Spawn body.


Sent from my iPad using Tapatalk

Me too

[Shinchu]

Cm9000 what is this bj green Cherokee you speak of?

[CM9000]

Bleepin jeeps scorpion crawler. Its on the lube tubes. Matt did a build series on it. Sweet rig too, it has a burrito warmer.

Originally Posted by Shinchu

Cm9000 what is this bj green Cherokee you speak of?

Sent from my LGMP260 using Tapatalk

[johnnyluv]

Originally Posted by indybama

Did we miss somethin here? This vid is from 9 months ago, but looks like a 'sneek peek' we all missed. It just came up on my youtube list as i was scrollin thru

Sent from my SM-J327VPP using Tapatalk

This Wraith Spawn 1.9 was built by Rivas Concepts back in 2015, and has always been my favorites.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[svt923]

Originally Posted by indybama

Did we miss somethin here?

A lot of people did.

Matt from Scale Builders Guild said the factory prototype was driving around at Axialfest 2017 but then there was that whole Hobbico implosion thing.

[Shinchu]

Originally Posted by CM9000

Bleepin jeeps scorpion crawler. Its on the lube tubes. Matt did a build series on it. Sweet rig too, it has a burrito warmer.

Sent from my LGMP260 using Tapatalk

You had me at burrito warmer.
(Btw I was the guy who kept saying "tacos" during Matts live stream yesterday haha what do you expect I'm San diegan!)

[CM9000]

Originally Posted by Shinchu

You had me at burrito warmer.
(Btw I was the guy who kept saying "tacos" during Matts live stream yesterday haha what do you expect I'm San diegan!)

Bleepinjeep matt is who I was talkin about.

Sent from my LGMP260 using Tapatalk

[Col_Sanders]

Even though it's not really groundbreaking or anything, I like it. I do think they missed the mark on price though. Dog bones, crap shocks, crap plastic links should put it in the $300-320 range. I might buy the cage and body or a slider if I can get my hands on it for cheap.

[TAT76]

RPP email saying it was in stock and since I have no control I ordered without thinking. Love the new look and thinking it will make a great trail truck.

[Col_Sanders]

In a moment of weakness, I ordered one too. I already have universals, tires, wheels, aluminum knuckles, and a few other goodies sitting here in the parts bin looking for a home. I'll try to keep this rig pretty simple. Should be a pretty good training rig for the kids.