Inner fender tubs for bed
 

I'm building a f350 crew cab with drop bed. And not really sure how to make inner fender tubs for the bed. Does anyone out there 3d print them? Or any other ideas and pics would be great

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

Drop bed??? Styrene is the first thing that comes to mind if you don't weld for tubs. When you say tubs, I think like a streed rod that is putting drag slicks on the rear so a narrowed rear end and the wide wheels go on, requiring wide inner fender wells. We on the same page? Got pics/sketches of what you are trying to accomplish?

Re: Inner fender tubs for bed
 

Similar to this. https://uploads.tapatalk-cdn.com/201...2983821bc0.jpg

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

I have styrene.this is my first attempt.. used .030 bed is 45mm tall. They are 18mm tall.and about 3 1/4 inch long.https://uploads.tapatalk-cdn.com/201...bfe8bc3a3d.jpghttps://uploads.tapatalk-cdn.com/201...66a3915f57.jpghttps://uploads.tapatalk-cdn.com/201...0b2ee99274.jpghttps://uploads.tapatalk-cdn.com/201...992f4257ab.jpg

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

check out the trx4 inner fenders

Re: Inner fender tubs for bed
 

Looks like you know what you are doing.

Re: Inner fender tubs for bed
 

I don't though lol... I think they are to long

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

What do u mean.ill check

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

Have you mounted the body to see what you really need? Otherwise its a crap shoot getting it right. You could get some 26 ga sheet metal, make them 1 piece and jb weld or solder the seams as another option.

Re: Inner fender tubs for bed
 

I'm working on tubs for the bed. Look up

Sent from my Moto Z (2) using Tapatalk

Re: Inner fender tubs for bed
 

Strictly cosmetic, no function? I though you needed to eat the tires like a 1:1.