06-17-2020, 06:05 AM | #1 |
Newbie Join Date: Jun 2020 Location: Southwest
Posts: 40
| RC lights issues
Hello, New to the forum, LOTS of questions, I tried to search around and sift through the many pages on Google, but I wasn't able to find any answers. I feel Like I have a "noob" questions, but maybe not. My setup: - Apex Products remote on/off switch (light controller) - Tekin RX4 ECS - 3S lipo - Spektrum DX5 TX - Spektrum 6 channel RX - Powershift Vanquish VS4-10 O.E.M light kit. when I have the lights ON it appears to suck 30-40% of the power away from the truck and it runs very jerky. With the lights off it runs amazing! its clearly the lights sucking/leaching power from the ESC, is this something that I have set up wrong? Thanks, Joe |
Sponsored Links | |
06-17-2020, 07:10 AM | #2 |
I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,648
| Re: RC lights issues
Something is likely wrong in your wiring, a short or something. That ESC has an 8 amp BEC, and should be more than enough to power anything you have connected to it.
|
06-17-2020, 07:12 AM | #3 | |
Newbie Join Date: Jun 2020 Location: Southwest
Posts: 40
| Re: RC lights issues Quote:
Do you have any recommendations for a controller that I can use from my remote? that one is/was the only one I could find that would on/off. | |
06-17-2020, 07:17 AM | #4 |
Newbie Join Date: Jun 2020 Location: Southwest
Posts: 40
| Re: RC lights issues
Another thought, if I plug in and set up another channel do I need to re-bind/calibrate the ESC & RX/TX? Thanks, Joe |
06-17-2020, 07:18 AM | #5 | |
Quarry Creeper Join Date: Mar 2014 Location: Masshole
Posts: 224
| Re: RC lights issues Quote:
https://store11415794.ecwid.com/PST-...itch-p85299057 They do have this switch but of course you would need to carry the controller around and I don't think you want to do that: https://store11415794.ecwid.com/PST-...ller-p85296042 | |
06-17-2020, 07:40 AM | #6 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: RC lights issues
My trick RC has the whole thing. https://youtu.be/lv-XrhBL8SQ (turn the volume down or the beep as I switch is annoying ) Hang up and Drive |
06-17-2020, 07:46 AM | #7 | |
Newbie Join Date: Jun 2020 Location: Southwest
Posts: 40
| Re: RC lights issues Quote:
| |
06-17-2020, 08:53 AM | #8 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| RC lights issues |
06-17-2020, 09:13 AM | #9 |
Newbie Join Date: Jun 2020 Location: Southwest
Posts: 40
| Re: RC lights issues |
06-17-2020, 10:18 AM | #10 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: RC lights issues
None whatsoever. I’m also running 4 more halos as rock lights, also switched off the Dragon controller. In the video I’m lifting the throttle when switching light levels, not sure why I did that. The Dragon controller has two power levels also and different ports. Hang up and Drive |
06-17-2020, 01:53 PM | #11 | |
Quarry Creeper Join Date: Mar 2014 Location: Masshole
Posts: 224
| Re: RC lights issues Quote:
I understand you want to control it with your transmitter but if you can test with the balance port you'll at least know the issue is most likely with the receiver or some other wiring issue which was mentioned previously. | |
RC lights issues - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Servo electronics as lights on/off switch control issues | nightcrawler48 | Electronics | 17 | 03-03-2019 10:16 AM |
Adding the lights and rock lights to a TRX-4 | MikeMontgomery1970 | Traxxas TRX-4 | 6 | 09-09-2017 10:15 PM |
Savox 1256tg servo issues. Winch in/out, lights flicker ?? | Hoosierdady | Electronics | 3 | 04-26-2014 04:13 PM |
| |