crawler hauler
 

ok so I'm building a quad cab Chevy 3500 dually rig. gonna be a hauler for my scx10. it will be a flat deck with a wedge and flip down ramps. I'm starting to piece together the electronics now as I have pretty much everything else ordered or on the way. it will be front mount motor/2 speed trans combo(low range is 1:8 high range is 1:4.8 transfer case geared 1:1.2) with the injora scx10 kit as I'm extending an scx10 frame. what turn motor should I go with that can haul the weight of my other scx10 truck and what kg servo
picture is kind of what I'm going for just not as low deck will be above the rear wheels sitting on the rear frame sections

https://www.pirate4x4.com/attachments/ch1-jpg.1263610/

Re: crawler hauler
 

A 35/45T lathe motor would provide enough power. Any of the 25/30kg red or blue servos will work

Re: crawler hauler
 

A revolver could also supply ample torque either a full sized 540 or the classic HH which has a bit more mass and torque

Re: crawler hauler
 

I opted for a Fusion SE 1200KV in my hauler.
Lots of torque for hauling but buttery smooth too

https://live.staticflickr.com/65535/...d7f39020_h.jpgIMG_20230512_114304_HDR by Stuart Pardue, on Flickr

Re: crawler hauler
 

So no quad cab ?

Re: crawler hauler
 

He's not the OP - just showing us how it COULD be done - and VERY nicely, I might add...

Re: crawler hauler
 

Dough some how i missed the part were they were different people lol

Ill just change my original post to say something stupid like what no quad cab lol that will fix it