|
| LinkBack | Thread Tools | Display Modes |
02-13-2010, 12:54 PM | #1 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| Hawaii's Top Truck Challange OK guys, you wanted it & here it is. We have been working hard on this & hope everyone comes out to join the fun. There will be 2 classes, street & trail. See the guidlines below. The goal of this event is to bring SCALE rigs & have fun. This is not a USRCCA pro comp. Please keep that in mind. Street Class • Description - An off-road vehicle that you would " DRIVE " on the street or to the trail head • 115mm / 4.5" max tire size with a max rim size of 1.9" • No wheelbase limit- wheelbase must 'fit' vehicle concept/body. • No max track width. • You may modify any tire that is not on the banned list as long as it fits the CLASS that you intend to run it in. You may NOT combine two different style of tires to make one. • You must run a complete body, including bumpers, fenders, doors & tailgates. Some fender trimming is allowed but the basic shape must be retained, Fenders may be cut, or flat fendered, but it must resemble a 1:1 rig you'd see on the street. If you remove the tailgate, you must have a complete floor and drop bed. If you want to remove your doors, you must run a full interior. • A shortened or lengthened body is allowable. A tubed bed is fine(rear fender and tailgate rules do not apply to tubed beds). • No 4 wheel steer or rear steer at all ! If you have more than 2 axles, the FRONT axles are the ONLY ones that can steer. • No MOA axles of any kind. • Single engine rigs only. • Wheelbase is limited only by your body, and must fit in your fender wells. • Vehicle must have a frame-railed chassis. Tubed frame rails are ok. • Vehicle battery must be mounted on the chassis. You CANNOT mount the battery ON the steering servo/axle/upper links. The goal is to place the battery where it is not visible for a more scale appearance. Trail Class • Description - An off-road vehicle that you would " TRAILER " to the trail head • 140mm / 5.5" max tire size with a max rim size of 2.2"You may run 1.9" if you choose. • No wheelbase maximum- wheelbase must 'fit' truck concept/body. • No max track width. • You may modify any tire that is NOT on the banned list as long as it fits the CLASS that you intend to run it in. You may NOT combine two different style of tires to make one. • You must run a complete body, including bumpers, fenders, doors & tailgates. Some fender trimming is allowed but the basic shape must be retained, Fenders may be cut, or flat fendered, but it must resemble a 1:1 rig you'd see on the trail. • A shortened or lengthened body is allowable. A tubed bed is fine(rear fender and tailgate rules do not apply to tubed beds). • No 4 wheel steer or rear steer at all ! If you have more than 2 axles, the FRONT axles are the ONLY ones that can steer. • No MOA axles of any kind. • Single engine rigs only. • Wheelbase is limited only by your body, and must fit in your fender wells. • Vehicle must have a frame-railed chassis. Tubed frame rails are ok. • Vehicle battery must be mounted on the chassis. You CANNOT mount the battery ON the steering servo/axle/upper links. The goal is to place the battery where it is not visible for a more scale appearance. " TUBERS " If you plan to run a tuber in EITHER class, here is what you need to know. It must have a full interior, 2 front seats SIDE BY SIDE, a dash, a steering wheel, a hood panel, a roof panel and a left and right side panel. If it is a jeep, it needs to resemble a jeep. The minimum size for the tubers is as follows: Height 5 " , measured from bottom of skid pan to the roof top Width 5 " , measured from the middle of the door bars, side to side length, your chassis needs to be ATLEAST as long as your wheelbase, measured with the front tires pointed straight and the vehicle at rest. NOTE: this does not apply if you have a truggy or back halfed truck with a conventional frame and cab. BOTH CLASSES, NO COMP OR TVP CHASSIS, NO FRAME EXTENSIONS TO MAKE IT SCALE EITHER, PERIOD. THIS IS A SCALE EVENT GUYS. Example of these chassis are: SWX, J2-TT, GC-2, edge, eclipse, hustler, etc.... Banned Tire List: I think we should do this as none of there you'd see on the street. There is nothing close to them in the real world. • Losi Claws and Comp Claws • Imex red rocks, rubicons, truck pulls, skulls and bones • Hot Bodies Rovers and Sedonas • HPI Rock Grabbers • All Panther Tires • All Jconcepts Tires • Full-width Mashers, narrowed are OK, no wider than 1.75". • Pro-Line Chisels and Badlands • RC4WD Rocklins, Crazy crawlers and X-locks • Any on-road, buggy tires or truck racing type tire • Non listed tires must be judged and we reserve the right to modify this list as new comp tires are released. Last edited by DISTURBIN' tha PEACE; 02-13-2010 at 12:56 PM. |
Sponsored Links | |
02-13-2010, 12:59 PM | #2 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| TTC events Concourse Sled pull Mud bog Frame twister Hillclimb |
02-13-2010, 01:00 PM | #3 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| Scoring will be added later |
02-13-2010, 01:25 PM | #4 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| Location TBA |
02-13-2010, 03:53 PM | #5 |
Newbie Join Date: Jan 2010 Location: hawaii
Posts: 21
|
if you are thinking about entering i will need anestimated head count for propper permit. you can post it here or shoot me an e-mail or pm.i would like to get this info asap aloha
|
02-13-2010, 07:53 PM | #6 |
Rock Crawler Join Date: Dec 2005 Location: Hawaii
Posts: 888
|
i'm in. when's the ttc taking place? i gotta try and switch days off. enter fee? can i run two 1.9?
|
02-13-2010, 08:39 PM | #7 |
Rock Crawler Join Date: Aug 2006 Location: sleeping in my truck!
Posts: 674
|
i'm in!
|
02-13-2010, 09:42 PM | #8 |
Quarry Creeper Join Date: Dec 2009 Location: Honolulu
Posts: 428
|
I'm in. I going drive there, do the challenge, and then drive 'em back home. (If I no break down.) *edit* running 1.9 |
02-13-2010, 11:35 PM | #9 | ||
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| Quote:
Quote:
My DD will trailer my trail rig.Whoo hoo!!! | ||
02-14-2010, 01:22 AM | #10 |
Rock Crawler Join Date: Aug 2006 Location: sleeping in my truck!
Posts: 674
| |
02-14-2010, 01:26 AM | #11 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
| |
02-14-2010, 02:55 AM | #12 |
Rock Crawler Join Date: Dec 2005 Location: Hawaii
Posts: 888
|
ok one truck per class
|
02-16-2010, 11:56 PM | #13 |
Newbie Join Date: Jan 2010 Location: hawaii
Posts: 21
| |
02-17-2010, 01:11 AM | #14 |
Rock Crawler Join Date: Aug 2006 Location: sleeping in my truck!
Posts: 674
|
so what will become of this $5 fee? i don't have a problem with paying it, but i'm kind of curious what it will go to. will it be per class? rig? to be honest, this will maybe deter some because of a mentioning of a fee. just questioning on this.
|
02-17-2010, 03:00 AM | #15 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
|
What we originally talked about was $1 winner take all. If we get 10 guys, you'll go home with 9 bonus bukks!!!
|
02-17-2010, 03:43 AM | #16 |
Rock Crawler Join Date: Aug 2006 Location: sleeping in my truck!
Posts: 674
| |
02-17-2010, 05:43 PM | #17 |
Newbie Join Date: Jan 2010 Location: hawaii
Posts: 21
| dont get me wrong all of entry money will go back to participants (jackpot baby). the 5 bucks mentioned was just a starting ponit the only thing that needs to be paid for are the permit. so dlnr cant kick us out.
|
02-18-2010, 12:56 AM | #18 |
I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!!
Posts: 6,081
|
How much is the permit?
|
02-18-2010, 01:03 AM | #19 |
Newbie Join Date: Jan 2010 Location: hawaii
Posts: 21
|
5 bucks per 25 people looks like we need 2 so $10 cause this has to cover spectators too. so 2dawlah per truck entry will cover permit,still cheap,plus can make good size jackpot wot u tink.
|
02-18-2010, 01:52 AM | #20 |
Rock Crawler Join Date: Dec 2005 Location: Hawaii
Posts: 888
|
i'd be willing to pay $5 per truck.
|
Thread Tools | |
Display Modes | |
| |