RCCrawler Forums

j33pownr · 09-03-2008, 05:54 AM

I got my 35t care package yesterday with everything in order.

Cave Dave · 09-03-2008, 06:31 AM

Thanks for the great service JRH ! I recived my 35t yesterday,and this is a quality piece. Do you recogmend any special break in method? Thanks again RedRockcrawler for the heads up that these were in stock.

NeXt559 · 09-08-2008, 09:24 PM

when are the 35t motors going to be available again ?

looks like i missed out on the last set

Locked Up · 09-11-2008, 01:09 AM

Quote:

Originally Posted by NeXt559

when are the 35t motors going to be available again ?

looks like i missed out on the last set

I think he said 2 weeks when I had him on the phone the other day but I could be wrong.

Thekingcrawler · 09-16-2008, 08:15 PM

are the handwound 45turn motors still available

JohnRobHolmes · 09-16-2008, 10:23 PM

They will be when they ship in, maybe a week or so.

Locked Up · 09-20-2008, 09:53 PM

JRH,
Do these need any capacitors added on?

I got my hands on two 45ts and I'm excited to go break some parts with the additional torque

constantmotion · 09-24-2008, 09:33 AM

Quote:

Originally Posted by Locked Up

JRH,
Do these need any capacitors added on?

I got my hands on two 45ts and I'm excited to go break some parts with the additional torque

Site says "Onboard Surface Mount Capacitors – Helps eliminate unwanted radio interference caused by electric motors"

bcrofts · 09-24-2008, 10:28 AM

are the 35t back in stock

ADDICT · 09-30-2008, 09:25 AM

Quote:

Originally Posted by bcrofts

are the 35t back in stock

and your 45Ts. Just wondering a eta. Thank you

JohnRobHolmes · 09-30-2008, 09:32 AM

Just sent an email to see when the winding will be complete. No 35 or 45t motors are in stock currently.

I got your message, and my phone is dead at the moment. When it recharges I will give you a ring.

killjoyken · 10-18-2008, 06:29 PM

Hey John, I'm wondering if the 30t will be ok with my setup. I'm running an FX-R w/CCBEC on 3s A123. Since the 35t is still out of stock, do you think the 30t would work or am I better off waiting for the 35t? I'm currently running an Integy 50t but since I went with A123 I've lost some wheel speed that I'm dying to get back.

Too bad I can't fit a Puller in my GC-1!!

JohnRobHolmes · 10-19-2008, 09:09 AM

Quote:

Originally Posted by killjoyken

Hey John, I'm wondering if the 30t will be ok with my setup. I'm running an FX-R w/CCBEC on 3s A123. Since the 35t is still out of stock, do you think the 30t would work or am I better off waiting for the 35t? I'm currently running an Integy 50t but since I went with A123 I've lost some wheel speed that I'm dying to get back.

Too bad I can't fit a Puller in my GC-1!!

I just got the 35t back in stock. I think you would be fine with a 30t however.

45 and 35t back in stock.

Locked Up · 10-19-2008, 09:21 AM

So I can just jump on the site and add one to the cart?

Woohoo!

JRH, do you still have that Nomadio react?

JohnRobHolmes · 10-19-2008, 09:22 AM

Nomadio is gone, I will take it down now.

bcrofts · 10-19-2008, 11:04 AM

sweet thanks long wate but it will be worth it

killjoyken · 10-19-2008, 02:20 PM

Just placed an order for the 35t and some stickers. Thanks John!

Hildy · 10-19-2008, 05:12 PM

Awesome. I finally got my order on one of your 35t Handwounds.

It will be a great upgrade to my 55t Integy.

NeXt559 · 10-19-2008, 09:33 PM

YESS!!!!!

finally ordered a 35t (along w/ some other random stuff)

ive been waiting to get one of these since i joined the forum, and you've always ended up selling out before i could put my order in

cant wait

freakos · 10-20-2008, 03:44 PM

how does the 35T torquemaster compare to the 35T Warrior motor i have ??

09-03-2008, 06:31 AM	#102
Cave Dave RCC Addict Join Date: Oct 2007 Location: Kennewick, Washington Posts: 1,382	Thanks for the great service JRH ! I recived my 35t yesterday,and this is a quality piece. Do you recogmend any special break in method? Thanks again RedRockcrawler for the heads up that these were in stock. Last edited by Cave Dave; 09-03-2008 at 06:38 AM.

TorqueMaster Pro Handwound Rock Crawler motors - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R1 w/ HH TorqueMaster Pro 540 Handwound	nafie	Electronics	2	07-16-2011 10:12 AM

09-03-2008, 05:54 AM	#101
j33pownr Quarry Creeper Join Date: May 2008 Location: ncrccrawlers.com Posts: 216	I got my 35t care package yesterday with everything in order.

09-08-2008, 09:24 PM	#103
NeXt559 RCC Addict Join Date: Jun 2008 Location: Fresno Posts: 1,464	when are the 35t motors going to be available again ? looks like i missed out on the last set

09-16-2008, 08:15 PM	#105
Thekingcrawler Newbie Join Date: Apr 2008 Location: wilson Posts: 32	are the handwound 45turn motors still available

09-16-2008, 10:23 PM	#106
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	They will be when they ship in, maybe a week or so.

09-20-2008, 09:53 PM	#107
Locked Up SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park Posts: 5,453	JRH, Do these need any capacitors added on? I got my hands on two 45ts and I'm excited to go break some parts with the additional torque

09-24-2008, 10:28 AM	#109
bcrofts TEAM RCC Join Date: Jul 2006 Location: Novato Posts: 1,493	are the 35t back in stock

09-30-2008, 09:32 AM	#111
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Just sent an email to see when the winding will be complete. No 35 or 45t motors are in stock currently. I got your message, and my phone is dead at the moment. When it recharges I will give you a ring.

10-18-2008, 06:29 PM	#112
killjoyken Quarry Creeper Join Date: Nov 2006 Location: San Jose Posts: 353	Hey John, I'm wondering if the 30t will be ok with my setup. I'm running an FX-R w/CCBEC on 3s A123. Since the 35t is still out of stock, do you think the 30t would work or am I better off waiting for the 35t? I'm currently running an Integy 50t but since I went with A123 I've lost some wheel speed that I'm dying to get back. Too bad I can't fit a Puller in my GC-1!!

10-19-2008, 09:21 AM	#114
Locked Up SCALE PERFORMANCE PARTS Join Date: Oct 2007 Location: Cedar Park Posts: 5,453	So I can just jump on the site and add one to the cart? Woohoo! JRH, do you still have that Nomadio react?

10-19-2008, 09:22 AM	#115
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Nomadio is gone, I will take it down now.

Sponsored Links

10-19-2008, 11:04 AM	#116
bcrofts TEAM RCC Join Date: Jul 2006 Location: Novato Posts: 1,493	sweet thanks long wate but it will be worth it

10-19-2008, 02:20 PM	#117
killjoyken Quarry Creeper Join Date: Nov 2006 Location: San Jose Posts: 353	Just placed an order for the 35t and some stickers. Thanks John!

10-19-2008, 05:12 PM	#118
Hildy Rock Crawler Join Date: Jul 2007 Location: central PA Posts: 679	Awesome. I finally got my order on one of your 35t Handwounds. It will be a great upgrade to my 55t Integy.

10-19-2008, 09:33 PM	#119
NeXt559 RCC Addict Join Date: Jun 2008 Location: Fresno Posts: 1,464	YESS!!!!! finally ordered a 35t (along w/ some other random stuff) ive been waiting to get one of these since i joined the forum, and you've always ended up selling out before i could put my order in cant wait

10-20-2008, 03:44 PM	#120
freakos Rock Stacker Join Date: Nov 2007 Location: Quebec,Canada Posts: 91	how does the 35T torquemaster compare to the 35T Warrior motor i have ??

RCCrawler Forums

Thread: TorqueMaster Pro Handwound Rock Crawler motors