RCCrawler Forums

pdm · 03-06-2009, 09:51 AM

Looks like I'm going to be needing a TM as well.

JohnRobHolmes · 03-19-2009, 07:25 PM

Guess what just hit the shores!!! The Origional build TorqueMaster is back, and with a Chrome can! I had these specially made for me, but you may see a few other companies using the same can since I was nice enough to share with a select few.

I am getting 30 35t and 30x 45t wound up right now. I expect them by the first of April.

ps. Chrome is hard to photograph!

dirtman · 03-19-2009, 10:53 PM

John,
Are these a better, worse, comparable motor to the p-94? What makes them different?

JohnRobHolmes · 03-19-2009, 11:50 PM

The p-94 just had a different replacement parts, specifically the comm, brushes and endbell made by Epic. The performance between the TM Pro build and the P-94 is near identical, with minor rpm/volt changes based on minute contruction differences.

dirtman · 03-21-2009, 12:18 AM

Hey thanks guy, just curious. Are you making A's in school? Hope so, lol.

BOWTIE · 03-21-2009, 05:09 AM

i NEED to get on your list!

i need two 45t when they are ready.

rockassassin · 03-23-2009, 11:16 AM

I'll take 2 45t. thanks

JohnRobHolmes · 03-23-2009, 11:19 AM

I will post up as soon as they are in my hands, then you can hit the site and buy em.

RealDeel · 03-27-2009, 01:11 PM

Do you have a better idea on these yet? Also do you have any of the cheapo Integy 35T in stock?

Brian

JohnRobHolmes · 03-27-2009, 03:02 PM

No 35t integy right now besides the v11. Mid to late next week I should get the motors.

JRH

ADDICT · 03-28-2009, 09:51 PM

Quote:

Originally Posted by JohnRobHolmes

I will post up as soon as they are in my hands, then you can hit the site and buy em.

Hi John, will these be available on your site before you post here, or do you normaly update RCC before your site. Just wondering cause I wanted to make sure I hit your batch before your all out. Thx for your time.

Rocky

* also, your still expecting shipment begining of April?

JohnRobHolmes · 03-29-2009, 07:29 AM

mid to late this week they should ship in. I have 60 of em being wound so they should last a week or two I would imagine.

I normally put them on the site and update rcc at the same time.

ADDICT · 03-29-2009, 03:43 PM

Quote:

Originally Posted by JohnRobHolmes

mid to late this week they should ship in. I have 60 of em being wound so they should last a week or two I would imagine.

I normally put them on the site and update rcc at the same time.

Thx for the update and fast reply John.

GaBronco · 04-02-2009, 05:03 PM

Will replacement parts be available for these? In the sense that the p-94s do not? If so, i am in on 2x35t! Cant wait for a couple nice handwounds!

JohnRobHolmes · 04-02-2009, 05:46 PM

Yep, these will use the same brushes and springs as any reedy motor. Laydown style brushes, and I have thousands of them left.

GaBronco · 04-02-2009, 06:51 PM

F-ING SWEET! Now lets get them on the site, im ready to spend some more money on this $$$ pit.

JohnRobHolmes · 04-02-2009, 06:58 PM

Brushes and springs are already on the site, if that is what you are reffering to. http://holmeshobbies.com/home.php?cat=23

The motors should be shipped out tomorrow, so arrival around mid next week is most likely.

GaBronco · 04-02-2009, 07:23 PM

Quote:

Originally Posted by JohnRobHolmes

Brushes and springs are already on the site, if that is what you are reffering to. http://holmeshobbies.com/home.php?cat=23

The motors should be shipped out tomorrow, so arrival around mid next week is most likely.

Thank you Mr. Holmes but i was referring to the Blingin' Chrome Can Handwounds! Ill be keeping an eye out for them to hit here and your store. Thanks! Will they have a new picture to click on, on your website or will it be the OG one?

Thanks
Nathan

JohnRobHolmes · 04-02-2009, 07:45 PM

The OG pic most likely, as the visual aspect of the can is the only difference and the sticker covers 99% of it.

Thorsteenster · 04-04-2009, 10:59 PM

Any recomendations on wind and pinion size for a CR01 on a 2S or 3S A123? Scale rig so wouldn't need tons of grunt but nice balance with wheel speed.

03-19-2009, 07:25 PM	#202
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Guess what just hit the shores!!! The Origional build TorqueMaster is back, and with a Chrome can! I had these specially made for me, but you may see a few other companies using the same can since I was nice enough to share with a select few. I am getting 30 35t and 30x 45t wound up right now. I expect them by the first of April. ps. Chrome is hard to photograph! Attached Images

04-04-2009, 10:59 PM	#220
Thorsteenster I wanna be Dave Join Date: May 2006 Location: Arlington, VA Posts: 3,377	Any recomendations on wind and pinion size for a CR01 on a 2S or 3S A123? Scale rig so wouldn't need tons of grunt but nice balance with wheel speed. Last edited by Thorsteenster; 04-06-2009 at 03:48 AM.

TorqueMaster Pro Handwound Rock Crawler motors - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R1 w/ HH TorqueMaster Pro 540 Handwound	nafie	Electronics	2	07-16-2011 10:12 AM

03-06-2009, 09:51 AM	#201
pdm Pebble Pounder Join Date: Apr 2008 Location: Marietta Posts: 141	Looks like I'm going to be needing a TM as well.

03-19-2009, 10:53 PM	#203
dirtman Pebble Pounder Join Date: Feb 2009 Location: Cda, Idaho Posts: 138	John, Are these a better, worse, comparable motor to the p-94? What makes them different?

03-19-2009, 11:50 PM	#204
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The p-94 just had a different replacement parts, specifically the comm, brushes and endbell made by Epic. The performance between the TM Pro build and the P-94 is near identical, with minor rpm/volt changes based on minute contruction differences.

03-21-2009, 12:18 AM	#205
dirtman Pebble Pounder Join Date: Feb 2009 Location: Cda, Idaho Posts: 138	Hey thanks guy, just curious. Are you making A's in school? Hope so, lol.

03-21-2009, 05:09 AM	#206
BOWTIE Ultimate RC Decals Join Date: Aug 2005 Location: San Antonio Posts: 3,761	i NEED to get on your list! i need two 45t when they are ready.

03-23-2009, 11:16 AM	#207
rockassassin Quarry Creeper Join Date: Apr 2008 Location: Carson City Posts: 383	I'll take 2 45t. thanks

03-23-2009, 11:19 AM	#208
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I will post up as soon as they are in my hands, then you can hit the site and buy em.

03-27-2009, 01:11 PM	#209
RealDeel Pebble Pounder Join Date: May 2008 Location: IN Posts: 147	Do you have a better idea on these yet? Also do you have any of the cheapo Integy 35T in stock? Brian

03-27-2009, 03:02 PM	#210
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	No 35t integy right now besides the v11. Mid to late next week I should get the motors. JRH

03-29-2009, 07:29 AM	#212
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	mid to late this week they should ship in. I have 60 of em being wound so they should last a week or two I would imagine. I normally put them on the site and update rcc at the same time.

Sponsored Links

04-02-2009, 05:03 PM	#214
GaBronco Rock Crawler Join Date: Aug 2008 Location: Alamogordo Posts: 774	Will replacement parts be available for these? In the sense that the p-94s do not? If so, i am in on 2x35t! Cant wait for a couple nice handwounds!

04-02-2009, 05:46 PM	#215
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Yep, these will use the same brushes and springs as any reedy motor. Laydown style brushes, and I have thousands of them left.

04-02-2009, 06:51 PM	#216
GaBronco Rock Crawler Join Date: Aug 2008 Location: Alamogordo Posts: 774	F-ING SWEET! Now lets get them on the site, im ready to spend some more money on this $$$ pit.

04-02-2009, 06:58 PM	#217
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Brushes and springs are already on the site, if that is what you are reffering to. http://holmeshobbies.com/home.php?cat=23 The motors should be shipped out tomorrow, so arrival around mid next week is most likely.

04-02-2009, 07:45 PM	#219
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The OG pic most likely, as the visual aspect of the can is the only difference and the sticker covers 99% of it.

RCCrawler Forums

Thread: TorqueMaster Pro Handwound Rock Crawler motors