RCCrawler Forums

quarterpounder · 10-07-2009, 07:51 PM

okay

so the drag slows you down when you let the trigger on the transmitter move towards the neutral position, but once the trigger on the transmitter is at or in the neutral position, the hold brake are activated. and when the motor stops spinning i can then apply reverse.

so there is three different types of reverse? i only know of two.

instant-like on entry level rc where all you have is forward or reverse
double tap is where you would move the trigger up once to stop and once more to get reverse
delayed, i have always that delayed was double tap. what is delay and are my other to definitions correct?

not sure if it was posted already but what is the esc's limitation to dual motors?

JohnRobHolmes · 10-08-2009, 11:06 AM

Not yet, I am having to find a printer that can do what I want. Maybe a week or two out, depending on turnaround time.

Jeepial · 10-08-2009, 11:52 AM

Quote:

Originally Posted by JohnRobHolmes

Not yet, I am having to find a printer that can do what I want. Maybe a week or two out, depending on turnaround time.

Cool,just let me know..

BILLYGOAT · 10-08-2009, 03:25 PM

when will more be in stock?

THnCS · 10-08-2009, 03:43 PM

Quote:

Originally Posted by BILLYGOAT

when will more be in stock?

x2, I think JRH mentioned a couple weeks in another thread. I know I love the one in my Super, going to get 2 more when they are in stock again.

dub599 · 10-10-2009, 11:54 PM

these esc's are great. i finally got my rig put together and got to test out my br-xl. its got a ton of hold power and it super smooth on the low end it . i highly suggest this esc to anyone even considering it. the bec is more than enough to easily move my futaba s9157 and hs-225 servos

BigB_117 · 10-11-2009, 12:27 PM

Got mine on Friday John. Thanks! Can't wait to get it wired up.

Thanks for labeling the inputs. I was thinking that the bullet connectors were for the battery not the motor.

Sharkey · 10-11-2009, 01:38 PM

Quote:

Originally Posted by quarterpounder

so there is three different types of reverse? i only know of two.

instant-like on entry level rc where all you have is forward or reverse
double tap is where you would move the trigger up once to stop and once more to get reverse
delayed, i have always that delayed was double tap. what is delay and are my other to definitions correct?

delay reverse is something more designed for touring cars/buggies/monster trucks, fast stuff. when you push the trigger forward it applies brakes, and after a programmed time (many cases its 3 seconds) it will go into reverse. its far from ideal for a crawler, and in most cases speed controls with delay reverse dont use drag brakes or hold brakes.

you are correct on instant and double tap.

Arct1k · 10-11-2009, 06:21 PM

New version of castle link is out ;)

Manning · 10-11-2009, 06:27 PM

Kewl......now we need another batch of esc's to go with it...

Looking forward to getting one of these bad boys.

THnCS · 10-11-2009, 08:31 PM

Quote:

Originally Posted by Arct1k

New version of castle link is out ;)

F'N sweet. Now JRH needs to get some more in. I think I am looking at getting 2 more. Replacing all my castle stuff!!!!! Awesome esc John.

newbie8324 · 10-12-2009, 07:47 PM

i have some money burning a hole in my pocket and would like to pick up the TorqueMaster BR-XL, got a eta on these?

BILLYGOAT · 10-14-2009, 10:08 AM

guido rules, when you get more ill take 3

JohnRobHolmes · 10-15-2009, 07:16 AM

ETA is still about 5 weeks out or so if manufacturing goes off smoothly.

Gst95dsm · 10-15-2009, 04:23 PM

Haha.... can you tell we've all been waiting for a new ESC to come out??? I can't wait to get my hands on one! 5 weeks.......

Nabil · 10-21-2009, 02:55 PM

any idea when hold brake will be implemented?

JohnRobHolmes · 10-22-2009, 08:32 AM

Should have alpha version for testing within a week.

run2jeepn · 10-25-2009, 07:32 AM

ETA?

Still needing Stickers done? I can help ya if you need some made up.

BEELZEBOB · 10-26-2009, 11:43 AM

im so sick of ESC's frying or not working...

I REALLY want one of these bad boys for meh comp axial.

but hot damn, i want it before turkey day!!!

and just because im still newbish, this would be okay to run on 7 and 8 cell Nimh right?

Tanis · 10-26-2009, 01:39 PM

Quote:

Originally Posted by BEELZEBOB

im so sick of ESC's frying or not working...

I REALLY want one of these bad boys for meh comp axial.

but hot damn, i want it before turkey day!!!

and just because im still newbish, this would be okay to run on 7 and 8 cell Nimh right?

It'll work just fine with 7-8 cell Nimh

10-07-2009, 07:51 PM	#81
quarterpounder Newbie Join Date: Dec 2008 Location: here Posts: 37	okay so the drag slows you down when you let the trigger on the transmitter move towards the neutral position, but once the trigger on the transmitter is at or in the neutral position, the hold brake are activated. and when the motor stops spinning i can then apply reverse. so there is three different types of reverse? i only know of two. instant-like on entry level rc where all you have is forward or reverse double tap is where you would move the trigger up once to stop and once more to get reverse delayed, i have always that delayed was double tap. what is delay and are my other to definitions correct? not sure if it was posted already but what is the esc's limitation to dual motors? Last edited by quarterpounder; 10-07-2009 at 07:54 PM.

10-10-2009, 11:54 PM	#86
dub599 Quarry Creeper Join Date: Jan 2008 Location: pittsburg Posts: 284	these esc's are great. i finally got my rig put together and got to test out my br-xl. its got a ton of hold power and it super smooth on the low end it . i highly suggest this esc to anyone even considering it. the bec is more than enough to easily move my futaba s9157 and hs-225 servos Last edited by dub599; 10-10-2009 at 11:57 PM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/holmes-hobbies/200916-torquemaster-br-xl-big-brushed-power.html
Posted By	For	Type	Date
HH TorqueMaster BR-XL new bad boy esc!	This thread	Refback	10-04-2011 03:37 PM

10-08-2009, 11:06 AM	#82
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Not yet, I am having to find a printer that can do what I want. Maybe a week or two out, depending on turnaround time.

10-08-2009, 03:25 PM	#84
BILLYGOAT RCC Addict Join Date: Apr 2007 Location: RAMBLIN Posts: 1,713	when will more be in stock?

10-11-2009, 12:27 PM	#87
BigB_117 RCC Addict Join Date: Jan 2009 Location: Sebastopol CA Posts: 1,525	Got mine on Friday John. Thanks! Can't wait to get it wired up. Thanks for labeling the inputs. I was thinking that the bullet connectors were for the battery not the motor.

10-11-2009, 06:21 PM	#89
Arct1k Quarry Creeper Join Date: Oct 2008 Location: In the basement... Posts: 473	New version of castle link is out ;)

10-11-2009, 06:27 PM	#90
Manning RCC Addict Join Date: Nov 2006 Location: Lowell, Arkansas Posts: 1,307	Kewl......now we need another batch of esc's to go with it... Looking forward to getting one of these bad boys.

10-12-2009, 07:47 PM	#92
newbie8324 Quarry Creeper Join Date: Mar 2007 Location: hartland wi Posts: 243	i have some money burning a hole in my pocket and would like to pick up the TorqueMaster BR-XL, got a eta on these?

10-14-2009, 10:08 AM	#93
BILLYGOAT RCC Addict Join Date: Apr 2007 Location: RAMBLIN Posts: 1,713	guido rules, when you get more ill take 3

10-15-2009, 07:16 AM	#94
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	ETA is still about 5 weeks out or so if manufacturing goes off smoothly.

10-15-2009, 04:23 PM	#95
Gst95dsm Pebble Pounder Join Date: Oct 2008 Location: Fresno Posts: 139	Haha.... can you tell we've all been waiting for a new ESC to come out??? I can't wait to get my hands on one! 5 weeks.......

10-21-2009, 02:55 PM	#96
Nabil no talent hack Join Date: Feb 2007 Location: Redwood City Posts: 2,479	any idea when hold brake will be implemented?

Sponsored Links

10-22-2009, 08:32 AM	#97
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Should have alpha version for testing within a week.

10-25-2009, 07:32 AM	#98
run2jeepn I wanna be Dave Join Date: Sep 2005 Location: USA Posts: 11,196	ETA? Still needing Stickers done? I can help ya if you need some made up.

10-26-2009, 11:43 AM	#99
BEELZEBOB I wanna be Dave Join Date: Jan 2009 Location: By a lake in Thornton Posts: 2,218	im so sick of ESC's frying or not working... I REALLY want one of these bad boys for meh comp axial. but hot damn, i want it before turkey day!!! and just because im still newbish, this would be okay to run on 7 and 8 cell Nimh right?

RCCrawler Forums

Thread: TorqueMaster BR-XL Big Brushed Power!