RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Holmes Hobbies (http://www.rccrawler.com/forum/holmes-hobbies/)
-   -   Cobalt puller 454 and 500, last run (http://www.rccrawler.com/forum/holmes-hobbies/245906-cobalt-puller-454-500-last-run.html)

Stormin2u 01-25-2011 08:56 AM

JRH will you be getting any 500s back in stock?

JohnRobHolmes 01-25-2011 09:00 AM

Nope, no more cans to be had. I am working on a suitable brushed replacement for them, as well as a brushless version.

1beatjeep 01-26-2011 01:35 PM

Hey. John
Any word on the 454 motor yet its going on two weeks now
Thanks

G64 01-31-2011 07:20 AM

Quote:

Originally Posted by JohnRobHolmes (Post 2882974)
Working hard to get this sorted or find someone that can.

In the mean time I just got delivery of a little lot of 16t arms that were wound to my specs. Since I can't keep up with the winding and normal work myself, I can at least teach others how to do it and hire them for it.

JRH, with those 16t, slotted or not slotted, do you have one available?

Mini 01-31-2011 09:40 AM

Any update when you will be able the slot the coms?

JohnRobHolmes 01-31-2011 09:41 AM

I sent a batch of arms off to a more professional machinist for slotting, since I haven't been able to get clean cuts on my machine. I have plenty of 16t wound up here though, they are on the site now.

1beatjeep, if you want a substitution or refund at any time for the order just let me know. I certainly didn't expect to have the slotting cost so much time on my behalf, or else I wouldn't have offered them until I had a big batch already done.

1beatjeep 02-01-2011 09:13 AM

[QUOTE=JohnRobHolmes

1beatjeep, if you want a substitution or refund at any time for the order just let me know. I certainly didn't expect to have the slotting cost so much time on my behalf, or else I wouldn't have offered them until I had a big batch already done.[/QUOTE]

hey John

Ill wait

thanks anyway

Aussie Nerd 02-01-2011 08:42 PM

How long are we looking at before they ship?

Thanks"thumbsup"
Kieren

xirtic 02-02-2011 03:34 PM

Just out of curiousity, how many amps would a 16T slotted 454 pull on 3 cells?? I am thinking of pairing these with a pair of Mamba Micro Max ESCs.

Aussie Nerd 02-02-2011 03:38 PM

I asked John this in the tech thread question, and I was told that either the mamba micro or micro sidewinder should be fine with the 16ts. However I wasn't told an amp draw as such.

Kieren

xirtic 02-02-2011 03:39 PM

Quote:

Originally Posted by Aussie Nerd (Post 2902242)
I asked John this in the tech thread question, and I was told that either the mamba micro or micro sidewinder should be fine with the 16ts. However I wasn't told an amp draw as such.

Kieren


That is enough of an answer....thanks much.

Aussie Nerd 02-02-2011 03:43 PM

Quote:

Originally Posted by Aussie Nerd (Post 2868169)
Would I be alright using mamba micro's with 16t 454's or would I need FXRs? Or better yet would I be better off waiting for you new smaller esc? This will be in a mid 4 pound rig I'd think.

Thanks"thumbsup"
Kieren

Quote:

Originally Posted by JohnRobHolmes (Post 2868190)
You should be fine with the mamba micro pros. I don't have a release date for my own micro ESC.

Quote:

Originally Posted by Aussie Nerd (Post 2891947)
What would you rate the 454's as amp wise? Would they be around a 25-30 amp motor? From what I can gather the micro sidewinder is 25, b1r is 30 and the mamba micro is 35.

Thanks"thumbsup"
Kieren

Quote:

Originally Posted by JohnRobHolmes (Post 2899109)
The 11t is really hot, but the 16t would be fine with the sidewinder micro. I would use the mamba micro for the 11t motors.

There is all the posts, however JRH might have more to add for you"thumbsup"

Kieren

xirtic 02-02-2011 03:47 PM

Quote:

Originally Posted by Aussie Nerd (Post 2902255)
There is all the posts, however JRH might have more to add for you"thumbsup"

Kieren


Yep....I found most of those posts before posting here. I just was looking for some sort of confirmation that the 454 16TS will work with Mamba Micro Pros. I have no complaints about my current motors, but am looking to shave more weight from my Bully V1 Rig.

Aussie Nerd 02-02-2011 03:47 PM

Actually I don't know if that's on 3s or 2s? JRH could you please clarify that?

Thanks"thumbsup"
Kieren

JohnRobHolmes 02-02-2011 04:03 PM

3s.

Aussie Nerd 02-02-2011 05:38 PM

Thanks"thumbsup"

Kieren

Aussie Nerd 02-08-2011 09:41 PM

Any word on the slotting?

Thanks"thumbsup"
Kieren

PANIC 02-08-2011 10:51 PM

Yeah I wonder too- ordered a 454 slotted fm the website.

Thanks

JohnRobHolmes 02-09-2011 07:01 AM

Just sent a email to the machinist that I sent em off to. He got caught up in the snow storm like I did and it put him a bit behind too.

Ty 02-09-2011 02:49 PM

Hey john, I just got my 16 turn motors and wanted to know if they come timed at zero. I am guessing that the cans are from some 11 turns right? Thanks TY.


All times are GMT -6. The time now is 06:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com