RCCrawler Forums

JohnRobHolmes · 07-28-2010, 08:14 AM

The 500 is blue. Possibly I sent the wrong one to you, or maybe you actually got a 454? Got the invoice number?

Offroader5 · 07-28-2010, 11:37 AM

Quote:

Originally Posted by JohnRobHolmes

The 500 is blue. Possibly I sent the wrong one to you, or maybe you actually got a 454? Got the invoice number?

Ahh, ok. Think I got the wrong one then. I did order a 500 but I must have gotten a 454 cuz it's black. I'll have to get ya the invoice number when I get home this afternoon.

FYI, I've already soldered bullets onto the one ya sent me

....but I have yet to use it.

Offroader5 · 07-28-2010, 05:47 PM

Order number was 5273. Just let me know how ya want to go about a swap

Offroader5 · 08-01-2010, 11:53 AM

Quote:

Originally Posted by JohnRobHolmes

The 500 is blue. Possibly I sent the wrong one to you, or maybe you actually got a 454? Got the invoice number?

Quote:

Originally Posted by Offroader5

Ahh, ok. Think I got the wrong one then. I did order a 500 but I must have gotten a 454 cuz it's black. I'll have to get ya the invoice number when I get home this afternoon.

FYI, I've already soldered bullets onto the one ya sent me

....but I have yet to use it.

Quote:

Originally Posted by Offroader5

Order number was 5273. Just let me know how ya want to go about a swap

...

JohnRobHolmes · 08-01-2010, 09:23 PM

I will hit you up in the morning with an email. If you don't see it around noon send one to me please.

Offroader5 · 08-09-2010, 07:53 PM

Got the motor on Friday, sent the other back your way on Saturday. Thanks John

Highlucks · 11-17-2010, 09:42 PM

If stock holdings are correct I just bought the last one

JohnRobHolmes · 11-18-2010, 07:22 AM

I have about 100 more 454's here. 500's are gone.

luke-o · 11-19-2010, 09:58 PM

how would a 454 hold up in a 9-10lb 2.2 scaler with about a 65:1 gear ratio

JohnRobHolmes · 11-20-2010, 02:32 PM

Geared that low, you should be fine. You just won't have as much power as a 540 size motor, but you will drop some weight.

sally1800 · 01-04-2011, 11:14 AM

John

I see these 16 turn puller will they be ok on 3s and what gearing do you recomend?

PANIC · 01-04-2011, 12:09 PM

John,

Interested to get a 454 puller for my gatekeeper ax10. But everyting is out of stock. Only one available is 11t? is it too much ?

Mini · 01-06-2011, 06:56 PM

Quote:

Originally Posted by saydee1800

John

I see these 16 turn puller will they be ok on 3s and what gearing do you recomend?

X2

Aussie Nerd · 01-06-2011, 07:32 PM

Quote:

Originally Posted by Mini

X2

X3, also how many do you have left? I'd like to get some for a new build and would like to see how much I should hurry!

Kieren

JohnRobHolmes · 01-06-2011, 10:09 PM

The 16t on 2s or 3s works very well. I have 100 some odd cans here, 50 armatures being "factory" wound to 16t, and about 40 blank arms that I am winding up here to 16t.

Aussie Nerd · 01-07-2011, 12:12 AM

Would you recommend slotting on the 16t's? That would be in a Al/Ti fighter build.

Thanks

Kieren

JohnRobHolmes · 01-07-2011, 08:32 AM

Yeah, I like them slotted.

Aussie Nerd · 01-07-2011, 05:46 PM

Ok I might have to pick up some slotted 16t's soon.

Thanks for your help

Kieren

Aussie Nerd · 01-08-2011, 02:14 AM

Is it just me or have you only got 11t's listed in stock on your website?

Thanks

Kieren

JohnRobHolmes · 01-08-2011, 08:14 AM

I sold off ten of the 16t. Once I get them built and shipped I will refresh the inventory and offer 10 more.

01-04-2011, 11:14 AM	#31
sally1800 I wanna be Dave Join Date: Dec 2008 Location: ? Posts: 5,055	John I see these 16 turn puller will they be ok on 3s and what gearing do you recomend? Last edited by sally1800; 01-04-2011 at 11:54 AM.

01-04-2011, 12:09 PM	#32
PANIC Rock Stacker Join Date: Sep 2008 Location: Vancouver BC Posts: 63	John, Interested to get a 454 puller for my gatekeeper ax10. But everyting is out of stock. Only one available is 11t? is it too much ? Last edited by PANIC; 01-06-2011 at 06:06 PM.

07-28-2010, 08:14 AM	#21
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The 500 is blue. Possibly I sent the wrong one to you, or maybe you actually got a 454? Got the invoice number?

07-28-2010, 05:47 PM	#23
Offroader5 Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ Posts: 3,073	Order number was 5273. Just let me know how ya want to go about a swap

08-01-2010, 09:23 PM	#25
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I will hit you up in the morning with an email. If you don't see it around noon send one to me please.

08-09-2010, 07:53 PM	#26
Offroader5 Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ Posts: 3,073	Got the motor on Friday, sent the other back your way on Saturday. Thanks John

11-17-2010, 09:42 PM	#27
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	If stock holdings are correct I just bought the last one

11-18-2010, 07:22 AM	#28
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I have about 100 more 454's here. 500's are gone.

11-19-2010, 09:58 PM	#29
luke-o Pebble Pounder Join Date: Mar 2009 Location: stayin fresh in the northwest Posts: 129	how would a 454 hold up in a 9-10lb 2.2 scaler with about a 65:1 gear ratio

11-20-2010, 02:32 PM	#30
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Geared that low, you should be fine. You just won't have as much power as a 540 size motor, but you will drop some weight.

01-06-2011, 10:09 PM	#35
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The 16t on 2s or 3s works very well. I have 100 some odd cans here, 50 armatures being "factory" wound to 16t, and about 40 blank arms that I am winding up here to 16t.

01-07-2011, 12:12 AM	#36
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Would you recommend slotting on the 16t's? That would be in a Al/Ti fighter build. Thanks Kieren

Sponsored Links

01-07-2011, 08:32 AM	#37
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Yeah, I like them slotted.

01-07-2011, 05:46 PM	#38
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Ok I might have to pick up some slotted 16t's soon. Thanks for your help Kieren

01-08-2011, 02:14 AM	#39
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Is it just me or have you only got 11t's listed in stock on your website? Thanks Kieren

01-08-2011, 08:14 AM	#40
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I sold off ten of the 16t. Once I get them built and shipped I will refresh the inventory and offer 10 more.

RCCrawler Forums

Thread: Cobalt puller 454 and 500, last run