RCCrawler Forums

Ty · 01-08-2011, 09:10 PM

Can you post a pic of the slotting, and it this something you can do if I send in my motors?

Mini · 01-09-2011, 07:17 PM

Quote:

Originally Posted by JohnRobHolmes

I sold off ten of the 16t. Once I get them built and shipped I will refresh the inventory and offer 10 more.

So this means you dont have any instock right now?

Aussie Nerd · 01-10-2011, 04:50 AM

Hey

Can you give us a rough idea when you'll have another batch of 16t's ready.

Thanks

Kieren

JohnRobHolmes · 01-10-2011, 11:20 AM

I will take a pic of the slotting once this batch is done. I just have a half dozen more to wind today, and previous orders will be shipping by Wednesday. Once the current and previous orders for the 16t are filled I will put 10 more 16t on the site, so another batch will start on Wednesday.

Aussie Nerd · 01-10-2011, 04:41 PM

Ok, I think the refresh button might be getting a workout

Thanks again

Kieren

sally1800 · 01-11-2011, 08:53 AM

Quote:

Originally Posted by Aussie Nerd

Hey

Can you give us a rough idea when you'll have another batch of 16t's ready.

Thanks

Kieren

Looks Like John's got two ready now.

Get fast !!!!!!

Aussie Nerd · 01-11-2011, 11:35 PM

Well they are mine now!

Thanks
Kieren

sally1800 · 01-12-2011, 05:49 AM

Quote:

Originally Posted by Aussie Nerd

Well they are mine now!

Thanks
Kieren

Glad I can help.

Quote:

Originally Posted by JohnRobHolmes

I will take a pic of the slotting once this batch is done. I just have a half dozen more to wind today, and previous orders will be shipping by Wednesday. Once the current and previous orders for the 16t are filled I will put 10 more 16t on the site, so another batch will start on Wednesday.

Show the goodie's

Mini · 01-16-2011, 06:43 PM

Come on Wednesday!!!!!! Lolol

sally1800 · 01-16-2011, 06:46 PM

Quote:

Originally Posted by Mini

Come on Wednesday!!!!!! Lolol

These little guys have wheels speed.

JohnRobHolmes · 01-16-2011, 09:37 PM

Broke the bit slotting the batch, so the next batch is on hold for a few more days.

Aussie Nerd · 01-16-2011, 11:45 PM

I think I can wait since these are the only parts of got for my new build

Thanks for the update

Kieren

Aussie Nerd · 01-23-2011, 10:07 PM

Any more update's John?

Thanks

Kieren

JohnRobHolmes · 01-24-2011, 10:21 AM

I keep breaking bits, thats an update

I think the cross screws on my mill may be worn out. I slotted the first 10 arms no sweat, then I started getting chatter. I have tightened the gibs and the nut but haven't been able to totally get rid of the vibrations. After I get through the waterproof ESC backorders today I will put a few more hours on the mill and see if I can work through it. If I can't I will have to send arms out for milling.

Aussie Nerd · 01-24-2011, 05:23 PM

Does that mean mine are done, since I got the early two

Sucks though if you are having trouble with your mill though, hopefully you can get it fixed

Thanks
Kieren

JohnRobHolmes · 01-24-2011, 07:39 PM

The first ten were for team drivers and such before I put them on the site for sale, yours were not in that batch.

Aussie Nerd · 01-24-2011, 07:53 PM

Ok no worries, well hopefully you get things running right again though

Kieren

JohnRobHolmes · 01-24-2011, 08:05 PM

Working hard to get this sorted or find someone that can.

In the mean time I just got delivery of a little lot of 16t arms that were wound to my specs. Since I can't keep up with the winding and normal work myself, I can at least teach others how to do it and hire them for it.

Highlucks · 01-25-2011, 08:32 AM

How do you think a pair of 11T 454's would go in an XR10, I have a new one here. Is it best just to order one more or do you do matched pairs?

JohnRobHolmes · 01-25-2011, 08:52 AM

You can just order another one. Matching them based on RPMs is pretty easy. I don't have a dyno here that can run them anyway.

The 11t works very well on 2s lipo. 3s may overheat it too quickly unless you are doing very short runs.

01-11-2011, 11:35 PM	#47
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Well they are mine now! Thanks Kieren Last edited by Aussie Nerd; 01-12-2011 at 12:38 AM.

01-08-2011, 09:10 PM	#41
Ty Quarry Creeper Join Date: Apr 2009 Location: Lincoln Posts: 371	Can you post a pic of the slotting, and it this something you can do if I send in my motors?

01-10-2011, 04:50 AM	#43
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Hey Can you give us a rough idea when you'll have another batch of 16t's ready. Thanks Kieren

01-10-2011, 11:20 AM	#44
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I will take a pic of the slotting once this batch is done. I just have a half dozen more to wind today, and previous orders will be shipping by Wednesday. Once the current and previous orders for the 16t are filled I will put 10 more 16t on the site, so another batch will start on Wednesday.

01-10-2011, 04:41 PM	#45
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Ok, I think the refresh button might be getting a workout Thanks again Kieren

01-16-2011, 06:43 PM	#49
Mini "HOLLYWOOD" Join Date: Dec 2008 Location: Miami Posts: 3,119	Come on Wednesday!!!!!! Lolol

01-16-2011, 09:37 PM	#51
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Broke the bit slotting the batch, so the next batch is on hold for a few more days.

01-16-2011, 11:45 PM	#52
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	I think I can wait since these are the only parts of got for my new build Thanks for the update Kieren

01-23-2011, 10:07 PM	#53
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Any more update's John? Thanks Kieren

01-24-2011, 10:21 AM	#54
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I keep breaking bits, thats an update I think the cross screws on my mill may be worn out. I slotted the first 10 arms no sweat, then I started getting chatter. I have tightened the gibs and the nut but haven't been able to totally get rid of the vibrations. After I get through the waterproof ESC backorders today I will put a few more hours on the mill and see if I can work through it. If I can't I will have to send arms out for milling.

01-24-2011, 05:23 PM	#55
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Does that mean mine are done, since I got the early two Sucks though if you are having trouble with your mill though, hopefully you can get it fixed Thanks Kieren

Sponsored Links

01-24-2011, 07:39 PM	#56
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The first ten were for team drivers and such before I put them on the site for sale, yours were not in that batch.

01-24-2011, 07:53 PM	#57
Aussie Nerd RCC Addict Join Date: Jun 2009 Location: QLD, Australia Posts: 1,512	Ok no worries, well hopefully you get things running right again though Kieren

01-24-2011, 08:05 PM	#58
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Working hard to get this sorted or find someone that can. In the mean time I just got delivery of a little lot of 16t arms that were wound to my specs. Since I can't keep up with the winding and normal work myself, I can at least teach others how to do it and hire them for it.

01-25-2011, 08:32 AM	#59
Highlucks Try to Bend it Join Date: Aug 2009 Location: Perth Australia Posts: 3,163	How do you think a pair of 11T 454's would go in an XR10, I have a new one here. Is it best just to order one more or do you do matched pairs?

01-25-2011, 08:52 AM	#60
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	You can just order another one. Matching them based on RPMs is pretty easy. I don't have a dyno here that can run them anyway. The 11t works very well on 2s lipo. 3s may overheat it too quickly unless you are doing very short runs.

RCCrawler Forums

Thread: Cobalt puller 454 and 500, last run