|
| LinkBack | Thread Tools | Display Modes |
11-13-2010, 08:46 PM | #61 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
It will be probably four weeks. I am waiting on another round of teardowns to do another 40 motors for matching.
|
Sponsored Links | |
11-13-2010, 09:33 PM | #62 |
Quarry Creeper Join Date: Nov 2009 Location: East Greenville
Posts: 226
|
whats the difference between if i placed an order for just two 45s or had a matched set made?And how long till you have an unmatched set in?
|
12-17-2010, 07:15 PM | #63 |
Pebble Pounder Join Date: Feb 2010 Location: Arvada
Posts: 96
|
anyone know when these will be back in stock i need 2-35t matched for the xr10 |
12-29-2010, 06:35 AM | #64 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
45t matched sets are ready to rock! 35t matched sets will be done in a few days. They are available for preorder if you need to ensure a fast shipment. As always, we aren't just taking two motors and timing them to match on a dyno. We are selecting matched pairs from lots of 40 or more motors to ensure that you are REALLY getting a pair that will perform predictable and consistent with each other. |
01-07-2011, 11:29 PM | #65 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
|
Will you offer a matched set of these in a combo or recomend 2 speedcontrols for an XR-10?
Last edited by JohnRobHolmes; 05-20-2011 at 08:51 AM. |
01-20-2011, 03:25 AM | #66 |
Pebble Pounder Join Date: Aug 2010 Location: Melbourne, Victoria, Australia.
Posts: 152
|
Hi JRH Just ordered a set of matched 35T's for my new XR10 are these in stock ready to go? I think these will be just what the doctor ordered can't wait to see the awsome power of these little beautys! Will be set up similar to Harleys same motors and ESC's so should be good Cheers Robb. |
01-20-2011, 07:33 AM | #67 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Indeed they are already built, and I will ship it out asap for you.
|
01-20-2011, 10:12 AM | #68 |
Pebble Pounder Join Date: Aug 2010 Location: Melbourne, Victoria, Australia.
Posts: 152
|
Thanks JRH I was pretty sure by reading the last few posts but just wanted to confirm they were ready to go? Thank you very much! Robb. |
01-31-2011, 10:15 PM | #69 |
Pebble Pounder Join Date: Aug 2010 Location: Melbourne, Victoria, Australia.
Posts: 152
|
Hi JRH just one question on my matched 35T's I noticed one of the motors is marked "rear" does this mean it is wound in reverse and I should connect to the + & - as per normal or should I disregard this and wire it in reverse as first thought? example: ESC+ to Motor- and ESC- to Motor+ Cheers Robb. |
02-01-2011, 07:20 AM | #70 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
The rear marked motor has the endbell flipped, and if you wanted timing I added a bit of forward timing. You can hook up positive to positive on the rear and it should rotate properly.
|
02-01-2011, 11:37 AM | #71 |
Pebble Pounder Join Date: Aug 2010 Location: Melbourne, Victoria, Australia.
Posts: 152
| |
02-03-2011, 05:58 PM | #72 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
|
I ordered a matched set of 45's a while back and I checked my bank and you didnt cash my card yet? Are you waitin cause you predict your brushless will be done soon. Just wonderin whats up?
|
02-03-2011, 09:00 PM | #73 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Maybe the transaction failed, do you have the order number? I don't have a lead on the brushless timing.
|
02-04-2011, 11:21 AM | #74 |
Rock Crawler Join Date: Jul 2009 Location: greeley
Posts: 545
| |
05-19-2011, 10:01 PM | #75 |
Quarry Creeper Join Date: Feb 2009 Location: Glendale Az
Posts: 384
|
Set of 40's matched with proper timing........available???
|
05-20-2011, 08:42 AM | #76 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
We can do speed matched sets no problem. Dyno matched motors require 32 motors in a lot to do properly, and we don't sell enough 40t motors for that. Just put your rig type in the timing box and we will speed match them and time them for your rig no charge. I just changed up the site a bit for easier inventory and ordering. Now the Power Matching is available as an option, instead of a motor type. Select it on 35t and 45t motors for precise Power Matched pairs, or on any other motor for basic dyno and speed matching to get your 40t motors as consistently performing as possible! Last edited by JohnRobHolmes; 05-20-2011 at 09:04 AM. |
05-20-2011, 09:07 AM | #77 |
Quarry Creeper Join Date: Feb 2009 Location: Glendale Az
Posts: 384
|
okay John....I will look in to some 35's matched.......get back to you soon... |
07-25-2011, 05:47 PM | #78 |
Pebble Pounder Join Date: Apr 2011 Location: El Paso
Posts: 191
|
i want some 35t's for my berg but the website says out of stock any word on when they'll be back in stock?
|
07-25-2011, 05:52 PM | #79 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
It will be about a week and a half. If you pick them up as a "custom" wind you can get at the front of the list.
|
08-09-2011, 05:25 PM | #80 |
Pebble Pounder Join Date: Apr 2011 Location: El Paso
Posts: 191
| |
| |