|
| LinkBack | Thread Tools | Display Modes |
07-20-2007, 11:01 AM | #1 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Holmes Hobbies Revolver Black (Special edition) Looking for a lightweight motor for your 2.2 or clodbuster? Introducing the Revolver Black! Designed around the OG revolver, yet with higher quality construction and Sleek looks. These are great outrunners for just about any rig, big or small. The small diameter allows gearing without worry of rubbing the gearbox, but it is large enough to produce a ton of power. I have even used one of these on my 14" super rig! Bolts up to ANY standard gearbox with plenty of room for all gearing choices 1/8" shaft fits standard pinions 350 Watts continuous 3.5 ounces, 127g 1000kv 6-12 cells nimh 2-4s lipo 1 3/8" width x 1 5/8" long construction (34x42mm) 3.5mm bullit plugs installed from factory As a side note I have been testing these for about 4 months, and haven't been disappointed once. Super smooth startup, works with any ESC, plenty of power, and cool running. Check them out at www.Holmeshobbies.com Last edited by JohnRobHolmes; 03-27-2008 at 05:12 PM. |
Sponsored Links | |
07-20-2007, 11:07 AM | #2 |
Pebble Pounder Join Date: Jun 2005 Location: Rockwell, NC
Posts: 131
|
Gotta get me one of them |
07-20-2007, 11:16 AM | #3 |
Y-Town Crawlers Join Date: Oct 2005 Location: Not Hesperia
Posts: 2,481
|
sweet!!
|
07-20-2007, 11:56 AM | #4 |
[HOONIGAN] Join Date: Nov 2005 Location: Grand Junction
Posts: 4,269
|
Is this thing as smooth as the original Revolver with a mamba 25 or is it going to be a little jerky at super slow speeds like most motors are? I really don't like how unsmooth the rr2 and the bm9 have been compared to a quark in general or a mamba 25 with a OG Revolver. |
07-20-2007, 12:04 PM | #5 | |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Quote:
| |
07-20-2007, 12:13 PM | #6 |
Adilynsdad too! Join Date: May 2004 Location: G ville
Posts: 8,844
|
sexy, very sexy
|
07-20-2007, 01:09 PM | #7 |
'08 2.2 National Champ Join Date: Nov 2006 Location: UTRCRC
Posts: 5,585
|
I'm interested, my OG revolver is still my favorite.
|
07-20-2007, 03:48 PM | #8 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| |
07-20-2007, 06:22 PM | #9 |
RCC Addict Join Date: Feb 2005 Location: Vancouver Island B.C.
Posts: 999
|
So how does this one stack up against a crawlmaster?
|
07-20-2007, 07:09 PM | #10 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| |
07-20-2007, 08:51 PM | #11 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
vid of the mamba 25 and crawlmaster, minimum throttle and 3 cell lipo on rc4wd tranny w/ 8 tooth pinion http://www.youtube.com/watch?v=IhYh1Wsr3Qw |
07-20-2007, 08:55 PM | #12 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
It does have a few twitches when coming up to an object. The quark 33 and mamba max do not show that, interestingly enough.
|
07-20-2007, 09:02 PM | #13 | |
RCC Addict Join Date: Aug 2006 Location: ****, SL,UT
Posts: 1,610
| Quote: is there ever gonna be a CHEAP brushless setup? | |
07-20-2007, 09:06 PM | #14 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
lol! I guess my speakers aren't turned up as loud as yours. How would $100 sound for a combo? |
07-20-2007, 09:10 PM | #15 |
RCC Addict Join Date: Aug 2006 Location: ****, SL,UT
Posts: 1,610
|
thats not to bad you got somthen up your sleve dont ya |
07-20-2007, 09:12 PM | #16 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Nope, that is just a GWS and mamba 25 or quark 33 with a few dollars knocked off. I suppose I should put that up on my site eh?
|
07-20-2007, 09:15 PM | #17 |
RCC Addict Join Date: Aug 2006 Location: ****, SL,UT
Posts: 1,610
| |
07-20-2007, 09:22 PM | #18 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| |
07-20-2007, 09:52 PM | #19 |
RCC Addict Join Date: Sep 2005 Location: Tempe, AZ
Posts: 1,262
|
This looks great ... might have to get one for my 1.9 scaler, btw what happened to the 3025's you just took them down?!
|
07-20-2007, 10:51 PM | #20 | |
Quarry Creeper Join Date: Aug 2006 Location: olympia
Posts: 210
| High Lift
I am building a highlift, what esc & motor do you recommend? Wow, those are awesome beadlocks, gonna have to get myself a pair, hehe... Thanks, Tim Quote:
| |
Thread Tools | |
Display Modes | |
| |