RCCrawler Forums

kaneohecrawler · 10-07-2011, 08:25 PM

Hey john really been liking ur motors been using the 35t torquemasters for the longest and I'm bout to step it up to 6s and I'm wanting a 16t of this crawlmaster. I've heard this thing is beast a few extra brushes would be nice as well. Thx again for all ur great products. Ohh I'm bout to order ur br/xl in about 20 mins when I get back to the shop 6s here I come!!!

Grimreeper · 11-24-2011, 06:56 PM

I have been running 35t handwounds on 4s and that has worked out great. I am looking for a suggestion on my xr that will give me better low end control. I could actually sacrafice some current wheelspeed if i had to but really dont want to. Also looking for more brake so i assume some brxls will do better than my mamba micros.

drzjohn · 11-25-2011, 01:12 AM

I am looking for a new motor for my wraith, I have read up about them and I am thinking of the 13t crawlmaster.
I have a few Q's,
1, will the 13t be any faster / slower than stock and will it work on the stock ESC ?,
2, your web site says out of stock, what is the excpected shipping date for them ?,
3, how much will shipping be to England UK ?.
Regards John.

DiggyStyle · 12-20-2011, 07:46 AM

I have been waiting just shy of 2 months for my 16T Crawlmaster Pro handwound motors (x4 of them). I am starting to get upset. Eddie at Brood has his equivalents in stock and ready to ship and he's been pressing on me to jump ship and go with him. I keep getting the same runaround "they should ship this week or next" but those weeks have long since come and gone. Most of the time, I get no response at all. I would really like to have some Holmes Handwounds in my rig, but I don't know if I can hold out much longer. Please give me some definitive answers soon! I would greatly appreciate it! :(

Sent from my DROID2 using Tapatalk

rbx · 01-10-2012, 10:30 AM

Hi John

Just wondering how would the 11t or 13t fare in a 1/10 4wd buggy with a 6 cell pack.(i know its equivalent to a 25-27t which is fine by me!)

I know its not crawler vehicule but i had to ask you!(appologies to the crawler guys)

JasonS9 · 01-10-2012, 10:06 PM

Why does this motor's endbell differ from the others? I picked it up used from someone at my local club.

What timing is this?

I just installed it in my wraith and wow

amazing motor, sooo smooth and lots of wheel speed. When I soldered up the motor + and - it ran in reverse(?) I was told that my motor was built to run in a wraith (?)

WIDELOAD · 01-11-2012, 03:06 AM

That one is based of a Checkpoint tear down which is why is looks different. Timing is set to 0° from the pics.

Easiest way to switch the rotation direction is loosen the end-bell screws and rotate the end-bell 180°.

alexchen86 · 01-11-2012, 09:00 AM

Hi John,

Any updates for stock on a CM 17T? Looking for one to go on my Wraith!

Thanks,
Alex

CarterFab · 02-02-2012, 07:49 AM

Trying to find a motor for my wraith. Wanting the 13t. If you could pm me with info or if I can order one to be on a list, that would be great.
Thanks
Clay

Clear Eyes, Full Hearts, Can't Lose

JohnRobHolmes · 02-02-2012, 07:52 AM

Please send questions direct through my site, I'm not able to answer tech and sales on the forums any longer

Holmes Hobbies / Holmes Bikes :: Help zone

But we will have another 30 13t mid next week, and if other "funky" winds are wanted they can be ordered as customs now. I do have a few 17t motors on the shelf hiding.

CarterFab · 02-02-2012, 08:04 AM

Messaged through website. Sorry for the inconvenience.
Apologies
Clay

Clear Eyes, Full Hearts, Can't Lose

JohnRobHolmes · 02-02-2012, 08:08 AM

No worries Clay! You just want a motor!

greencrawler · 02-02-2012, 09:00 PM

Message sent

JohnRobHolmes · 02-22-2012, 04:40 PM

Armatures now available separately!

Holmes Hobbies / Holmes Bikes :: Motors :: Brushed :: Replacement Parts and Service Tools :: 540 CrawlMaster armatures

Waiting Dragon · 03-07-2012, 11:19 PM

I ordered a set of the 2012 team edition crawlmasters(checkpoint) for my XR10, looking forward to their arrival!

JohnRobHolmes · 03-10-2012, 06:49 AM

Awesome, thanks!

Got a few 16t and 11t motors up on the site now, we managed to wind a few extra in the last batch. We are shooting for an extra 20 13t's in the current batch that should finish up end of this coming week.

MR.VERTICAL · 03-11-2012, 01:34 PM

Hey John do you have checkpoint brushes listed on your web site, i can't seem to find them.

chicklet · 03-11-2012, 01:53 PM

Quote:

Originally Posted by MR.VERTICAL

Hey John do you have checkpoint brushes listed on your web site, i can't seem to find them.

Motors->brushed->replacement parts/svc tools->540 motor springs/brushes->in the drop down menu.

MR.VERTICAL · 03-11-2012, 06:36 PM

Thanx found it just order some and 2 new arm's

dstrbd1 · 03-21-2012, 10:59 PM

John I sent a message on your website the other day about one of these Crawlmasters but have not gotten a response yet. The screws came out of the bell and it was loose in the can. I am worried that it may of damaged itself. Would you mind looking at it? I was not able to find one of the screws so I would need another of those also.

XR10
16t Crawl Masters
Dual FXR on 3s

Thanks
-Trent

12-20-2011, 07:46 AM	#124
DiggyStyle Quarry Creeper Join Date: Oct 2011 Location: Detroit Posts: 347	I have been waiting just shy of 2 months for my 16T Crawlmaster Pro handwound motors (x4 of them). I am starting to get upset. Eddie at Brood has his equivalents in stock and ready to ship and he's been pressing on me to jump ship and go with him. I keep getting the same runaround "they should ship this week or next" but those weeks have long since come and gone. Most of the time, I get no response at all. I would really like to have some Holmes Handwounds in my rig, but I don't know if I can hold out much longer. Please give me some definitive answers soon! I would greatly appreciate it! :( Sent from my DROID2 using Tapatalk Last edited by DiggyStyle; 12-20-2011 at 08:29 AM.

01-10-2012, 10:30 AM	#125
rbx Newbie Join Date: Feb 2011 Location: quebec Posts: 3	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Hi John Just wondering how would the 11t or 13t fare in a 1/10 4wd buggy with a 6 cell pack.(i know its equivalent to a 25-27t which is fine by me!) I know its not crawler vehicule but i had to ask you!(appologies to the crawler guys)

01-10-2012, 10:06 PM	#126
JasonS9 Newbie Join Date: Jan 2009 Location: Calgary Posts: 42	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Why does this motor's endbell differ from the others? I picked it up used from someone at my local club. What timing is this? I just installed it in my wraith and wow amazing motor, sooo smooth and lots of wheel speed. When I soldered up the motor + and - it ran in reverse(?) I was told that my motor was built to run in a wraith (?)

01-11-2012, 03:06 AM	#127
WIDELOAD Rock Crawler Join Date: May 2009 Location: Queensland, Australia Posts: 610	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! That one is based of a Checkpoint tear down which is why is looks different. Timing is set to 0° from the pics. Easiest way to switch the rotation direction is loosen the end-bell screws and rotate the end-bell 180°.

01-11-2012, 09:00 AM	#128
alexchen86 I wanna be Dave Join Date: Nov 2009 Location: Houston Posts: 2,004	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Hi John, Any updates for stock on a CM 17T? Looking for one to go on my Wraith! Thanks, Alex

10-07-2011, 08:25 PM	#121
kaneohecrawler RCC Addict Join Date: Aug 2010 Location: wherever paypal sais. Posts: 1,740	Hey john really been liking ur motors been using the 35t torquemasters for the longest and I'm bout to step it up to 6s and I'm wanting a 16t of this crawlmaster. I've heard this thing is beast a few extra brushes would be nice as well. Thx again for all ur great products. Ohh I'm bout to order ur br/xl in about 20 mins when I get back to the shop 6s here I come!!!

11-24-2011, 06:56 PM	#122
Grimreeper Rock Crawler Join Date: Mar 2010 Location: Hampton Posts: 751	I have been running 35t handwounds on 4s and that has worked out great. I am looking for a suggestion on my xr that will give me better low end control. I could actually sacrafice some current wheelspeed if i had to but really dont want to. Also looking for more brake so i assume some brxls will do better than my mamba micros.

11-25-2011, 01:12 AM	#123
drzjohn Rock Crawler Join Date: Jan 2006 Location: Derbyshire UK Posts: 623	I am looking for a new motor for my wraith, I have read up about them and I am thinking of the 13t crawlmaster. I have a few Q's, 1, will the 13t be any faster / slower than stock and will it work on the stock ESC ?, 2, your web site says out of stock, what is the excpected shipping date for them ?, 3, how much will shipping be to England UK ?. Regards John.

02-02-2012, 07:49 AM	#129
CarterFab Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas Posts: 3,519	Trying to find a motor for my wraith. Wanting the 13t. If you could pm me with info or if I can order one to be on a list, that would be great. Thanks Clay Clear Eyes, Full Hearts, Can't Lose

02-02-2012, 07:52 AM	#130
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Please send questions direct through my site, I'm not able to answer tech and sales on the forums any longer Holmes Hobbies / Holmes Bikes :: Help zone But we will have another 30 13t mid next week, and if other "funky" winds are wanted they can be ordered as customs now. I do have a few 17t motors on the shelf hiding.

02-02-2012, 08:04 AM	#131
CarterFab Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas Posts: 3,519	Messaged through website. Sorry for the inconvenience. Apologies Clay Clear Eyes, Full Hearts, Can't Lose

02-02-2012, 08:08 AM	#132
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! No worries Clay! You just want a motor!

02-02-2012, 09:00 PM	#133
greencrawler Rock Crawler Join Date: Nov 2009 Location: Etowah Posts: 668	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Message sent

02-22-2012, 04:40 PM	#134
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Armatures now available separately! Holmes Hobbies / Holmes Bikes :: Motors :: Brushed :: Replacement Parts and Service Tools :: 540 CrawlMaster armatures

03-07-2012, 11:19 PM	#135
Waiting Dragon RCC Addict Join Date: Jul 2009 Location: AT THE DRAGON'S LAIR Posts: 1,319	I ordered a set of the 2012 team edition crawlmasters(checkpoint) for my XR10, looking forward to their arrival!

Sponsored Links

03-10-2012, 06:49 AM	#136
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Awesome, thanks! Got a few 16t and 11t motors up on the site now, we managed to wind a few extra in the last batch. We are shooting for an extra 20 13t's in the current batch that should finish up end of this coming week.

03-11-2012, 01:34 PM	#137
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Hey John do you have checkpoint brushes listed on your web site, i can't seem to find them.

03-11-2012, 06:36 PM	#139
MR.VERTICAL I wanna be Dave Join Date: Nov 2008 Location: Too old to care Posts: 2,446	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! Thanx found it just order some and 2 new arm's

03-21-2012, 10:59 PM	#140
dstrbd1 Rock Crawler Join Date: Aug 2010 Location: Socal Posts: 699	Re: Crawlmaster 540 Brushed motor Sale thread- The low end King! John I sent a message on your website the other day about one of these Crawlmasters but have not gotten a response yet. The screws came out of the bell and it was loose in the can. I am worried that it may of damaged itself. Would you mind looking at it? I was not able to find one of the screws so I would need another of those also. XR10 16t Crawl Masters Dual FXR on 3s Thanks -Trent

RCCrawler Forums

Thread: Crawlmaster 540 Rock Crawler motor- The low end King!