RCCrawler Forums

team3six · 06-07-2011, 10:21 PM

John, looking to get a 20T. How long before they are in stock. The 30T from your original motors didnt do too well in the Teenycar. Need more speed.

JohnRobHolmes · 06-08-2011, 06:33 AM

I have two here, I just need to be sure they aren't spoken for first. After that I would expect about two weeks for the next round of winding and balancing.

We have a big shipment coming back from the balancer tomorrow. Of course I wound up everything except 20t in the last batch

team3six · 06-09-2011, 08:35 PM

well let me know boss. thanks

JohnRobHolmes · 06-09-2011, 09:32 PM

Looks like they are gone. Want me to put you down for the first two 20t to be done?

team3six · 06-09-2011, 09:35 PM

Quote:

Originally Posted by JohnRobHolmes

Looks like they are gone. Want me to put you down for the first two 20t to be done?

Just one John. Just one! Thanks
I wish I could call you so you can help me on this better.

team3six · 06-09-2011, 10:46 PM

Thanks John for the call and I think we have a solution. Sounds like a plan. Cant wait to try one of these bad boys out.

kennyj · 06-10-2011, 09:28 AM

Is anyone running a non br-xl powered rig with these? If so, what esc's?
How is the drag brake?

JohnRobHolmes · 06-10-2011, 09:29 AM

I'm running FXrs on mine with about 60% drag on an XR10. Plenty of drag for me.

Mjolnir · 06-14-2011, 10:44 AM

What would you suggest for a XR10 that will run on 3S.
I'm looking at the Crawlmaster and can't decide which winding I want.

16T seems a bit low but every post I read seems to say that's the "go to" motor. I want Torque more than speed but still want some wheel speed.
I'm no expert in motor since this is my very first electric kit.

My first idea was to get the 32T.

Any thoughts would be appreciated.

Thanks.

JohnRobHolmes · 06-14-2011, 10:46 AM

If you have no previous experience with crawling, the 16t will be a lot of speed to deal with. It is just slightly faster than a 35t "normal" motor. It would be my choice for comp crawling though.

If you don't need so much wheelspeed, the 20t or 28t will be a better choice.

Mjolnir · 06-14-2011, 10:58 AM

Any ETA on when they are gonna get back in stock ? (I'll go with the 28T)
Only thing available right now are the 32T

Mjolnir · 06-14-2011, 09:08 PM

Is there other options of HH motor in stock that would give about the same performances?

I mean I'm probably never gonna compete mostly due to my location and it's my first crawler. I just don't want to go cheap on the motors.

JohnRobHolmes · 06-14-2011, 09:10 PM

Looks like next wednesday for inventory at the moment.

A TorqueMaster Pro 35t would be the closest performance wise.

4ONDFLR · 06-16-2011, 09:24 PM

Just put in a custom order for a 16T and a BR-XL ESC tonight and my gf picked up the tab since today is my birthday!!! Thank for the great products John. Can't wait to try these out in my Wraith when it all gets here.

JohnRobHolmes · 06-17-2011, 07:56 AM

Sweet man! Thats a pretty nice GF!

Scattman · 06-20-2011, 07:09 PM

Any 16T arms available?

JohnRobHolmes · 06-20-2011, 07:12 PM

Wednesday.

submariner21 · 06-20-2011, 07:55 PM

What turn motor would you recommend in a Honcho, looking for something a little faster than the rtr 27t. I think I read somewhere you recommended the 16t?

RCram · 06-21-2011, 09:24 PM

Building up a wraith. Looking for a good crawl and crazy wheel speed. Would you run a 16t or 13t and adjust gearing?

JohnRobHolmes · 06-21-2011, 10:39 PM

Quote:

Originally Posted by submariner21

What turn motor would you recommend in a Honcho, looking for something a little faster than the rtr 27t. I think I read somewhere you recommended the 16t?

The 13t will be closest in speed on 2s. If you are running 3s you could use the 16t instead. We are also winding up some faster motors in the next batch as well.

Quote:

Originally Posted by RCram

Building up a wraith. Looking for a good crawl and crazy wheel speed. Would you run a 16t or 13t and adjust gearing?

I would choose the 13t on 3s or 4s for crazy wheel speed!

06-14-2011, 10:58 AM	#31
Mjolnir Newbie Join Date: Jun 2011 Location: Chateauguay Posts: 3	Any ETA on when they are gonna get back in stock ? (I'll go with the 28T) Only thing available right now are the 32T Last edited by Mjolnir; 06-14-2011 at 12:49 PM.

06-07-2011, 10:21 PM	#21
team3six www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville Posts: 4,506	John, looking to get a 20T. How long before they are in stock. The 30T from your original motors didnt do too well in the Teenycar. Need more speed.

06-08-2011, 06:33 AM	#22
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I have two here, I just need to be sure they aren't spoken for first. After that I would expect about two weeks for the next round of winding and balancing. We have a big shipment coming back from the balancer tomorrow. Of course I wound up everything except 20t in the last batch

06-09-2011, 08:35 PM	#23
team3six www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville Posts: 4,506	well let me know boss. thanks

06-09-2011, 09:32 PM	#24
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Looks like they are gone. Want me to put you down for the first two 20t to be done?

06-09-2011, 10:46 PM	#26
team3six www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville Posts: 4,506	Thanks John for the call and I think we have a solution. Sounds like a plan. Cant wait to try one of these bad boys out.

06-10-2011, 09:28 AM	#27
kennyj Rock Crawler Join Date: Nov 2009 Location: Wildwood Posts: 502	Is anyone running a non br-xl powered rig with these? If so, what esc's? How is the drag brake?

06-10-2011, 09:29 AM	#28
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I'm running FXrs on mine with about 60% drag on an XR10. Plenty of drag for me.

06-14-2011, 10:44 AM	#29
Mjolnir Newbie Join Date: Jun 2011 Location: Chateauguay Posts: 3	What would you suggest for a XR10 that will run on 3S. I'm looking at the Crawlmaster and can't decide which winding I want. 16T seems a bit low but every post I read seems to say that's the "go to" motor. I want Torque more than speed but still want some wheel speed. I'm no expert in motor since this is my very first electric kit. My first idea was to get the 32T. Any thoughts would be appreciated. Thanks.

06-14-2011, 10:46 AM	#30
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	If you have no previous experience with crawling, the 16t will be a lot of speed to deal with. It is just slightly faster than a 35t "normal" motor. It would be my choice for comp crawling though. If you don't need so much wheelspeed, the 20t or 28t will be a better choice.

06-14-2011, 09:08 PM	#32
Mjolnir Newbie Join Date: Jun 2011 Location: Chateauguay Posts: 3	Is there other options of HH motor in stock that would give about the same performances? I mean I'm probably never gonna compete mostly due to my location and it's my first crawler. I just don't want to go cheap on the motors.

Sponsored Links

06-20-2011, 07:09 PM	#36
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	Any 16T arms available?

06-14-2011, 09:10 PM	#33
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Looks like next wednesday for inventory at the moment. A TorqueMaster Pro 35t would be the closest performance wise.

06-16-2011, 09:24 PM	#34
4ONDFLR Rock Crawler Join Date: Feb 2008 Location: CHESAPEAKE, Va Posts: 556	Just put in a custom order for a 16T and a BR-XL ESC tonight and my gf picked up the tab since today is my birthday!!! Thank for the great products John. Can't wait to try these out in my Wraith when it all gets here.

06-17-2011, 07:56 AM	#35
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Sweet man! Thats a pretty nice GF!

06-20-2011, 07:12 PM	#37
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Wednesday.

06-20-2011, 07:55 PM	#38
submariner21 Newbie Join Date: Apr 2010 Location: Homestead,Fl Posts: 31	What turn motor would you recommend in a Honcho, looking for something a little faster than the rtr 27t. I think I read somewhere you recommended the 16t?

06-21-2011, 09:24 PM	#39
RCram Rock Stacker Join Date: Mar 2011 Location: Mpls Posts: 75	Building up a wraith. Looking for a good crawl and crazy wheel speed. Would you run a 16t or 13t and adjust gearing?

RCCrawler Forums

Thread: Crawlmaster 540 Rock Crawler motor- The low end King!