RCCrawler Forums

Prophecy · 05-06-2008, 02:55 PM

Hey John, thanks for the email letting me know my motor was on its way! I cant wait, ive been waiting to finish my super and once the power plant is here its crawlin time!!

JohnRobHolmes · 05-06-2008, 03:34 PM

All have been shipped, including internationals. Thanks for being so patient guys! Another round of motors is on the way.

toytech93 · 05-06-2008, 09:35 PM

Well, I'm having a hard time deciding what to do with my ax10. I run a rooster crawler esc with a integy 55T on a 7 cell nimh. I want both more torque and wheel speed. Is it possible ??? I wanted a 7T puller but I don't think the crawler esc can handle it . I thought about 3s lipo with the 55T ,but esc can't handle that either. Should I change ESC and ran 3s lipo with 55T ? OR I thought about trying a handwound 45T with 2s lipo on the rooster crawler esc ??? What would my Best option be ? Funds are somewhat limited..... Finding something to fit my budget and my needs is proving to tougher than I thought .... Please HELP !

JohnRobHolmes · 05-06-2008, 09:53 PM

The Rooster crawler ESC would do fine with a puller.

I am a big fan of 3 and 4s lipo, but you could run a 35t to 20t handwound on 2s lipo to get your speed up. Plenty of options really, and none of them are bad.

ffactory666 · 05-07-2008, 01:27 AM

Got my Paypal shipping confirmation , thanks John.

bigflex · 05-07-2008, 05:48 AM

Quote:

Originally Posted by JohnRobHolmes

Best guess, yes. I will put more up for sale here in the next few days since the motors are on the way already.

thank you sir!

I can't wait to get one of these.

toytech93 · 05-07-2008, 06:08 AM

[quote=JohnRobHolmes;1176860]The Rooster crawler ESC would do fine with a puller.

Well, thats Great. How do I preorder a 7T ? Your website won't allow it . Just let me know, paypal can be sent ASAP..... manoli427@yahoo.com

I can't wait to start braking drive shaft. LOL

JohnRobHolmes · 05-07-2008, 08:31 AM

You will have to wait until they are on the site toytech, I will probably add them on friday.

Speed Demon · 05-08-2008, 08:23 AM

John,

Sorry, I've read the entire thread and I am confused because my mind keep saying "get it! get it! get!".

So, may I know if 10T is already out or in pre-order? If pre-order, how long?

How about 7T? Also on pre-orders?

I am international and I have MM and 3S 20C Li-po. Safe??

bigflex · 05-08-2008, 09:39 AM

Quote:

Originally Posted by Speed Demon

John,

Sorry, I've read the entire thread and I am confused because my mind keep saying "get it! get it! get!".

So, may I know if 10T is already out or in pre-order? If pre-order, how long?

How about 7T? Also on pre-orders?

I am international and I have MM and 3S 20C Li-po. Safe??

7t pullers are about 2 weeks out. The 10t pullers are in the works but its only for the armatures, no time on them yet!

Oze30 · 05-08-2008, 01:31 PM

heya,

I don;t suppose you have a 4m 48dp pinion do you?

JohnRobHolmes · 05-08-2008, 02:08 PM

I don't have any 4mm pinions.

BILLYGOAT · 05-08-2008, 02:21 PM

Did I Miss Them Or Does You Site Need Update.

JohnRobHolmes · 05-08-2008, 02:33 PM

Just put 35 on the site, should be ready to go in two weeks.

BILLYGOAT · 05-08-2008, 02:45 PM

Got In On One Thanks. What Should I Order To Control It . Mm Or Sidewinder Or Fxr? Thanks

TxCruzr · 05-08-2008, 09:12 PM

I got my 7t in today and let me just say....big mistake

I love it

I'm going to have to go lipo as I am having to ziptie my big 6 cell pack on it right now but it runs great. TONS of wheel speed and great response.
Well worth it John, thanks

Oh yeah, popping wheelies and doing burnouts around the apartment makes your roommates think you're on crack:-D

bigflex · 05-08-2008, 09:20 PM

got it paid for! I can't wait to get this in my rock racer. Thanks John.

I also ordered a hand wound 35t for the comp rig.

toytech93 · 05-08-2008, 09:48 PM

Hey JRH , I just preorder my puller. I can't wait to test it out ! I'm sure its going to be just as great as everyone says it is. Whats a good gearing for a ax10 ? Stock gearing is 14/87

TxCruzr · 05-08-2008, 10:10 PM

Quote:

Originally Posted by toytech93

Hey JRH , I just preorder my puller. I can't wait to test it out ! I'm sure its going to be just as great as everyone says it is. Whats a good gearing for a ax10 ? Stock gearing is 14/87

I'm running the same thing but using a 12t pinion that was laying around. It's just right. 14 should work great for you. Going to also depend on how many cells you are running. Tested mine on 6cell sub-c's

volumeone · 05-08-2008, 10:29 PM

Just received mine in the mail today..... Ye Ha

05-08-2008, 02:21 PM	#233
BILLYGOAT RCC Addict Join Date: Apr 2007 Location: RAMBLIN Posts: 1,713	Presale Cobalt 7t Did I Miss Them Or Does You Site Need Update.

05-08-2008, 09:12 PM	#236
TxCruzr Rock Crawler Join Date: Dec 2005 Location: Borderland Tejas Posts: 750	I got my 7t in today and let me just say....big mistake I love it I'm going to have to go lipo as I am having to ziptie my big 6 cell pack on it right now but it runs great. TONS of wheel speed and great response. Well worth it John, thanks Oh yeah, popping wheelies and doing burnouts around the apartment makes your roommates think you're on crack:-D Last edited by TxCruzr; 05-08-2008 at 09:14 PM.

HH Cobalt Puller- Reborn page 35! - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R1 + Cobalt Puller	Highlucks	G-Made Crawlers	3	05-31-2010 09:38 PM

05-06-2008, 02:55 PM	#221
Prophecy Pebble Pounder Join Date: Oct 2007 Location: Allentown Posts: 155	Hey John, thanks for the email letting me know my motor was on its way! I cant wait, ive been waiting to finish my super and once the power plant is here its crawlin time!!

05-06-2008, 03:34 PM	#222
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	All have been shipped, including internationals. Thanks for being so patient guys! Another round of motors is on the way.

05-06-2008, 09:35 PM	#223
toytech93 Quarry Creeper Join Date: Mar 2008 Location: Raleigh, NC Posts: 441	Well, I'm having a hard time deciding what to do with my ax10. I run a rooster crawler esc with a integy 55T on a 7 cell nimh. I want both more torque and wheel speed. Is it possible ??? I wanted a 7T puller but I don't think the crawler esc can handle it . I thought about 3s lipo with the 55T ,but esc can't handle that either. Should I change ESC and ran 3s lipo with 55T ? OR I thought about trying a handwound 45T with 2s lipo on the rooster crawler esc ??? What would my Best option be ? Funds are somewhat limited..... Finding something to fit my budget and my needs is proving to tougher than I thought .... Please HELP !

05-06-2008, 09:53 PM	#224
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	The Rooster crawler ESC would do fine with a puller. I am a big fan of 3 and 4s lipo, but you could run a 35t to 20t handwound on 2s lipo to get your speed up. Plenty of options really, and none of them are bad.

05-07-2008, 01:27 AM	#225
ffactory666 Rock Stacker Join Date: Jan 2005 Location: Australia Posts: 93	Got my Paypal shipping confirmation , thanks John.

05-07-2008, 06:08 AM	#227
toytech93 Quarry Creeper Join Date: Mar 2008 Location: Raleigh, NC Posts: 441	[quote=JohnRobHolmes;1176860]The Rooster crawler ESC would do fine with a puller. Well, thats Great. How do I preorder a 7T ? Your website won't allow it . Just let me know, paypal can be sent ASAP..... manoli427@yahoo.com I can't wait to start braking drive shaft. LOL

05-07-2008, 08:31 AM	#228
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	You will have to wait until they are on the site toytech, I will probably add them on friday.

05-08-2008, 08:23 AM	#229
Speed Demon Pebble Pounder Join Date: Sep 2005 Location: somewhere on earth Posts: 188	John, Sorry, I've read the entire thread and I am confused because my mind keep saying "get it! get it! get!". So, may I know if 10T is already out or in pre-order? If pre-order, how long? How about 7T? Also on pre-orders? I am international and I have MM and 3S 20C Li-po. Safe??

05-08-2008, 01:31 PM	#231
Oze30 Pebble Pounder Join Date: Dec 2007 Location: UK Posts: 146	heya, I don;t suppose you have a 4m 48dp pinion do you?

05-08-2008, 02:08 PM	#232
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I don't have any 4mm pinions.

Sponsored Links

05-08-2008, 02:33 PM	#234
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Just put 35 on the site, should be ready to go in two weeks.

05-08-2008, 02:45 PM	#235
BILLYGOAT RCC Addict Join Date: Apr 2007 Location: RAMBLIN Posts: 1,713	Got In On One Thanks. What Should I Order To Control It . Mm Or Sidewinder Or Fxr? Thanks

05-08-2008, 09:20 PM	#237
bigflex I wanna be Dave Join Date: Jun 2005 Location: drillin Holes for the man Posts: 2,736	got it paid for! I can't wait to get this in my rock racer. Thanks John. I also ordered a hand wound 35t for the comp rig.

05-08-2008, 09:48 PM	#238
toytech93 Quarry Creeper Join Date: Mar 2008 Location: Raleigh, NC Posts: 441	Hey JRH , I just preorder my puller. I can't wait to test it out ! I'm sure its going to be just as great as everyone says it is. Whats a good gearing for a ax10 ? Stock gearing is 14/87

05-08-2008, 10:29 PM	#240
volumeone Rock Stacker Join Date: Mar 2007 Location: portland Posts: 72	Just received mine in the mail today..... Ye Ha

RCCrawler Forums

Thread: HH Cobalt Puller- Reborn page 35!