X2. I slapped 12 cells in my scaler and holy shit.

You will definitely want to keep an eye on the heat with that many cells, JRH recomends only up to 8cells for a reason ;-)

And that reason is so that people don't have to watch the heat :lol:

:lol::lol:"thumbsup"

It's running 10:70 pinion/spur so it should be ok. The motor was warm, but definately not hot. The MM was room temp. Thanks though. Some wouldn't think about that.

My friend and I were up late last night setting up his rig and he got it with a 7t puller. I was curious what all the fuss was about, until we got his MM programmed and put that thing on the floor!! DAMN! Now I have to get one. That thing is a monster...It seemed real torquey at first which was cool, but then I guess he really pulled the trigger on it! Damn that rig practically jumped off the floor. He has it on a 3s lipo rated at 1350 I think..Now I know what the fuss is about, and JRH, I will be getting one ordered up soon!

Well i received mine with my balancer, adapter and lipo + some cool JRH stickers"thumbsup", i tested my lipo pack 3s( first time with lipo, kinda scared at first:lol:) on my wk tuber with 9 tooth pinion and i couldn't make the slipper stop clicking from the get go:shock:, this battery was awesome, but i know this thread is about the 7t so i have to add the only test i did was done on my hand, just to see if it was working, big mistake!, i have done this many times with most of my ep motors, but this thing just jumped out of my grip and scared the crap out of me:shock::lol:, this motor has some balls"thumbsup"

The motor is boss.... No drag break needed for this sucker. Jumping off the floor is right. Can't wait to go lipo with this little devil. Crawls like a baby and runs like a hungery ethiopian.

I placed my order just now with paypal #1768. Thank You Holmes, Now will this work with the standard FX-R esc with a 14T limit or will i need to purchase a FX-R "Pro" with a no motor limit feature. Thx again

Rocky

Hey JRH, do you still expect to start shipping out the preorders on the 21st ???

Have an integy 55t in an Axial RTR and its too slow for me. This looks like a solution. I am gueesing the Axial AX-1 esc cant handle this? Also can this run on a regular for nimh stick pack? and 2/3 Saddle packs.

ordered mine up. can't wait

Hey JRH , where you at buddy ? shipping out pullers I hope !

Any update on these? CAnt wait to get mine in my hands. Thanks.

I might miss this order :( as I am saving for a ESC that can handle it. My questions are:
1. Whens the next run?
2. What AFFORDABLE esc can handle it?
3. Can it run on NIMH packs?

and lastly would an old school Tekin Titan handle it?

Hey Jrh. I Changed My Order Due To Space Issues But I Have Another Project In Mind. Is It Too Late To Add A 7t And Ship It All Together.if Not Ill Just Order One And Wait . Thanks

Hey holmes, Any update on shipping progress ? I can't wait to test out this motor !

Any 27t capable ESC can handle a 7t puller on lower voltage, and you can run nimh packs. The 2/3a cells won't have the punch of a lipo, but they do work.

The Axial ESC should actually handle it, but I haven't used it to know if the low speed resolution is decent or how hot it will get. See above answer on 2/3a cells.

What order number?

Just got back from the machinist, and they are not quite done. I will keep on them for completion, and if they can't get it done by weeks end I will have to pay for overtime machining to get them shipped in a decent time period.

Thanks for the answers.......got a FXR coming from the LHS..should be a better setup than my 55t/ Axial esc combo :)

thanks for the reply !