RCCrawler Forums
Page 15 of 51 « First 51011121314 15 161718192025 Last »
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Holmes Hobbies (http://www.rccrawler.com/forum/holmes-hobbies/)
-   -   HH Cobalt Puller- Reborn page 35! (http://www.rccrawler.com/forum/holmes-hobbies/86181-hh-cobalt-puller-reborn-page-35-a.html)

JohnRobHolmes 06-03-2008 03:37 PM
Quote:
Originally Posted by rtooyak (Post 1207359)
hi, JRH just wondering if the 7t puller i ordered got sent out yet to Anchorage, Alaska 99504

Rocky Tooyak

Thx

Quote:
Originally Posted by Deezul (Post 1209788)
I was just wondering if they were back from the machinist yet.
Just got em back, I will spend the night assembling and they should all ship tomorrow.

Quote:
Originally Posted by U DOWN (Post 1210574)
Can the Cobalt Puller fit in a SW3 :?:
Not without modification to the chassis.

Quote:
Originally Posted by HiloDB1 (Post 1211889)
What kind of connectors (if any) do the 7t motors come with?
These will actually have deans plugs on them.

Quote:
Originally Posted by MrNate (Post 1212584)
So, is this pre-order sold out, now? I'd like my scale truck to have some good wheelspeed for messing around when the rocks aren't close by.

Yes, they will be sold out for probably another two weeks. If you want comparable wheelspeed a 25t would get you there.

Deezul 06-03-2008 03:47 PM
Great news! Deans is a plus too(woulda hacked off anything else). Thanks for the update.

BILLYGOAT 06-04-2008 01:10 AM
awesome. they shipped today i hope . cant wait to get it. thanks

Speedyboy 06-04-2008 01:19 AM
YAY!!! can't wait.
Now I gotta rebuild my front axle.

JohnRobHolmes 06-04-2008 04:22 PM
Having troubles with paypal shipping right now. Hopefully it gets fixed before the PO closes so I can print the labels.

Deezul 06-04-2008 06:24 PM
one more day wont kill us.....no biggie

bigflex 06-04-2008 09:54 PM
Quote:
Originally Posted by Deezul (Post 1214241)
one more day wont kill us.....no biggie
X2! Heck I paied for mine the same day you posted them back up on your site. I am just glad to be getting one at all."thumbsup"

BILLYGOAT 06-04-2008 10:44 PM
i can wait. thanks for the update!!!

Deezul 06-05-2008 07:58 PM
looks like they went out?

JohnRobHolmes 06-06-2008 07:54 AM
Yep, shipped out all but the last two yesterday.

tsaun987 06-06-2008 11:36 AM
Do you know when you will have any more 5 or 7 turns JRH? Ive got a 10turn on 3s lipo/17t pinion/r2d and am looking for a bit more wheelspeed for my rock racer:lol:

Deezul 06-07-2008 05:47 PM
mine was spinning clockwise...is that normal? Seems like its backwards. My other motors go counter.

JohnRobHolmes 06-07-2008 05:55 PM
Quote:
Originally Posted by tsaun987 (Post 1216402)
Do you know when you will have any more 5 or 7 turns JRH? Ive got a 10turn on 3s lipo/17t pinion/r2d and am looking for a bit more wheelspeed for my rock racer:lol:
I have a few 7t right now, and I am waiting for the factory to get more 10t made.



Quote:
Originally Posted by Deezul (Post 1217874)
mine was spinning clockwise...is that normal? Seems like its backwards. My other motors go counter.
You can simply rotate the back plate 180* or swap the wires. I timed it to zero so either will work.

promatchrcr 06-07-2008 05:57 PM
Fitting in a GC1?
 
Someone may have asked, and I tried searching but has anyone shoe-horned one these bad boys in a GC1 Chassis? If so can I get some pictures, I want to try one but if the 2.5" long is correct it will not fit. (unless the is measured from the shaft to the end of the can) Any help would be appreciated!

Thanks!!

JohnRobHolmes 06-07-2008 06:03 PM
I don't think so, but somebody may have done it. A HH Pro Handwound would do the trick as well, 25t.

promatchrcr 06-07-2008 06:37 PM
I picked up an outrunner from you and I am thinking I may go back brushed, I can't get used to it yet,LOL
I guess the motor length isn't including the shaft?

JohnRobHolmes 06-07-2008 07:57 PM
Correct. Shaft length not included.

Deezul 06-07-2008 08:07 PM
Quote:
Originally Posted by JohnRobHolmes (Post 1217885)
I have a few 7t right now, and I am waiting for the factory to get more 10t made.





You can simply rotate the back plate 180* or swap the wires. I timed it to zero so either will work.
Great thanks. I rotated it 180 and all is good. Problem is I did not mark anything. Is there any way to ensure it is zero or close to it? All I got for tools is a multimeter.

promatchrcr 06-07-2008 08:12 PM
Quote:
Originally Posted by JohnRobHolmes (Post 1218001)
Correct. Shaft length not included.
Well crap,LOL I may try out the brushed one you mentioned. Thanks for the help John!

JohnRobHolmes 06-07-2008 08:12 PM
The screw and brush will be exactly in between the magnets if you look down the can. You can also use a mulitmeter to get the lowest amp draw at zero timing. If anything just make sure that forward is a bit faster if you can't get it exaxt.


All times are GMT -6. The time now is 09:39 AM.
Page 15 of 51 « First 51011121314 15 161718192025 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com