Most countries are $15 for basic priority. If you have sent an email I haven't replied to all yet. If you posted up I must have missed it.

sweet 8)

So, I could TECHNICALLY have my MM/7T combo by the end of next week? :D:D:D:D:D:D:D:D "thumbsup"

Just wondering if you got my order and if so any idea on shipping time frame?

Your gonna have to give a bit more info, I have no clue who you are. :lol:

No call from the machinist today, but I hope to have them shipping by the weekend.

My name is D. Svensson
It is an order for 2 7T pullers and 2 MM set for 7.2v packs

I am not seeing an order through my site. If you are waiting on an email return just revisit the site and order up with these instructions International order

I am out of mamba max controllers at the moment.

I ordered through email, I am international.
Sent you another email with the paypal transaction number.

John,

Thanks for taking the time to give me a call and help me answer some of my questions yesterday. I think I will go with the 7T in my slingshot thats on the way. PP sent.

Thanks,
Brian

ordered"thumbsup", only 2 left:shock:

----JRH----


I've got an 15C Eflite 2100mah 3S Lipo, sounds like the one you said.
What kind of runtime could you expect from this pack with the 7t puller motor?
Estimate time for crawling around, and estimate time for hauling ass at WOT if possible.

I love the run time of a 55t, but damnit, I need some serious power and wheelspeed.

For crawling around you could get 45 minutes. Hauling ass 15-20 min.







I called the machinist, evidently the floor worker broke his toe early this week and the shop has been working pretty slow. They are going to try and get it done by the end of the day. Sorry on the delay guys, but it isn't in my control at the moment.

I just ordered one of these motors online last week. Any chance of getting an update? Sorry if it is posted somewhere in the thread, no time to sift through the whole thing.

tia.
Jon Brule
brulej@msn.com

The post right above yours. The floor machinist broke something in his foot that caused the delay from the initial date, he can't work because of insurance or something so the owner is having to do the work. I am pushing them to get it done by monday, there is not much I can do but wait at the moment.

FLOG the floor machinst!!! Make it happen John!! Leave your soul at the door yo!! "thumbsup" heh-heh.

No sweat here man, thanks for the update though. Have a good weekend!

Rob

I only ordered yesterday so no worries mate I can wait, that will make it a 5t and a 7t in the inventory"thumbsup"

Hey John, i ordered mine back on April 9th and was wondering if it was shipped out yet? Invoice #1610 i believe. Thanks!

Yours has not, it is part of the same preorder batch that is at the machinist.

It's ok, my WK tranny started clicking yesterday.. it'll give my new gears time to get here. :D

Are there any available to order? Tried ordering online and nowhere to click for preorder? Whens the next batch going to be available?

I sent you an email yesterday. Just wondering if you got it?

I will re ask one of the questions here just in case.

I am curious as to why a BEC would get programmed for 6v if I will be using a 7.2v stick pack(sub c)?

I am not doubting you just curious.

I sold all of the motors in the last batch. When I get this round shipped out I will bring in another batch, should be about 2 weeks.

The BEC is programmed for the output, the CC BEC comes set to 5.1v stock and 6v is a little livelier for crawling. I got the email but haven't had a chance to respond. I am not at home right now so I can't get to my email.

Just got the motors back yesterday. I will be spending the next few evenings inspecting, packaging, and shipping all backorders. Thanks guys! You will love them.

Thanks for the quick response.

SWEEEEET! Doing the happy dance...:lol:

Very nice video, I wish that would fit in a copperhead!

ok I have a question. I want to run this motor in my rock racer I am building but what esc will I need to get to run it. I only run 7.2v nimh packs. I use 1500 2/3a and also 3300 sc packs. I really don't wanna go lipo and basiclly just need a speedo that will handle this motor with the packs I run. What would be the minimum esc you would recommend?

A speedo that would handle a 19t motor would be plenty. For the real load in a rockracer, you can just use your final speed. The ESC will see the same amount of work with a 19t geared to 20mph as a 10t geared to 20mph if you are using the same voltage.

For a nice all around bet the Sidewinder is great. For a smaller ESC the Tekin FX-R is awesome.

sweet thats what I needed to know! "thumbsup" Thanks for the quick reply. If I order one about how long could I expect the lead time to be?

I just emailed you! I tried to pay for one and it won't let me. what do I need to do to be sure I get one out of the new batch?

John have you tested this motor with the Sidewinder Micro. It looks like it will take it.

or maybe a mamba 25?

Still waiting on the invoice for the other stuff so it can ship with this motor.

Got it and done"thumbsup"

You should have an email cartronics

There is a way to get through my shopping cart if you put a US addy in the shipping field. I may have sent you an email about it already.

I doubt it, but I haven' tried.

No way.

Any idea on time frame for shipping my order, not to rush you or anything.
(two 7T pullers, 2 MM, 3 CC bec's)

Read post above :lol:;-)

If I remember right you sent an email concerning this and have not added the MM and BEC to the order right? I just counted the backorder MM against stock and I will have enough to fill the order. I will send an email to you about the payment, more than likely later this evening.



I will be hiring some help tonight (if she can come over) so that I can process as many orders as possible. It seems that most of my time has been spent on email and phone calls today instead of packaging, although the help I hired in this morning helped prep the motors. Now all I have to do is go through and time them all and package.

The original order included payment for both the 7T's and 2 MM, and I sent the payment for 3 BEC's just the other day.

what is the minimum number of continuous amps needed to keep a 7t happy? im trying to figure out batteries.