I didn't get an email either, so I was about to ask the same thing. I only had a 7T and a MM. But I didn't know where I was in the "line".:lol:

So any idea on time frame yet? Its killing me waiting to get this thing running.

Hi JRH, just wanted to know if my order shipped out, i didn't get an e-mail, thanks.

I would recommend a 1500 2 cell 15C minimum, and 2100 3 cell 15C min. (assuming lipo)

You should be coming up tomorrow. I have hired some help for 5 hours to get the rest out.

You should be covered tomorrow as well.

Got shipped out in today's mail. I missed the Saturday cutoff.



If all goes well every backorder should be taken care of by tomorrow evening. School is just taking a lot more of my time that I had planned for right now, it is like I have two full time jobs :lol:

"thumbsup"

Kicking around preordering a 7t, but am wondering if you have any plans to do a 10t run? The wheelspeed in the 7t looks awesome, but I have a hard time imagining that I'll need all that in a crawler. I'd rather preserve the run time. Would I see much difference? As always, thanks for taking the time to answer our zillions of questions. BTW, got my lipo in the mail today, and it looks like it'll suit my needs great. Thanks!

I am getting quotes from the factory for some 10t armatures, just waiting to hear back. If you don't want so much wheelspeed, just use lower voltage or gear down if possible. I can guarantee that you will find a use for the wheelspeed when you have it though.

I'm sure. :lol: I don't really want to buy new batteries, as I've got a fair amount of $$$ invested, and I really like the speed. Can't gear down much lower. I'm running Maxx driveshafts. I might try to shave them down a little, but I'm concerned about weakening them. How much faster is the 7t?

It is about 2300kv I think, maybe 2200 unloaded. It should be on my website. A bit more than twice the speed of a 55t.

Sorry, I seem to have my noob brain on. If I remember correctly the 10t is 1800kv? It'd be a little slower than the 7t, a little better run time, and still about 10,000x times more parts breaking torque than a 55t?

Yep, correct on all accounts.

Thanks. I think I'll hold out for your next run of 10t pullers. I don't want to give up too much run time....Of course, then I'll be thinking "gee, if only it were a little faster" :roll: Besides, I'm really curious to see what your new 10t will look like. Thanks for taking the time to answer my questions. Again.

Get ready for a wait. It could be months before I can get the factory to make armatures, and then you will have to buy a can too. The redesign is taking even longer, and so far multiple designs have fallen through for factory or production reasons.

I'm assuming you're talking about a long wait for the current 10t cobalts. Any alternate suggestions, given what I'm looking for?

You could get a 25t 540 Handwound. It would load down a bit more than the Cobalt Puller so it wouldn't spin quite as fast under load. I could also get a 30t wound up if that was too fast for you.

http://holmeshobbies.com/product.php...&cat=17&page=1

Cool, I'll give it some thought. I've been eyeballing those. Thanks!

so is the time frame on the 7t pullers still about 2 weeks out for the next batch?

Best guess, yes. I will put more up for sale here in the next few days since the motors are on the way already.

hey JRH, I was curious if a 10T puller could be ran on a Novak crawler ESC ??? The rooster crawler has a 27T limit. If it can't, Whats another ESC that has a drag brake at neutral ??

It would work fine on the Novak RC.

Hey John, thanks for the email letting me know my motor was on its way! I cant wait, ive been waiting to finish my super and once the power plant is here its crawlin time!!

All have been shipped, including internationals. Thanks for being so patient guys! Another round of motors is on the way.

Well, I'm having a hard time deciding what to do with my ax10. I run a rooster crawler esc with a integy 55T on a 7 cell nimh. I want both more torque and wheel speed. Is it possible ??? I wanted a 7T puller but I don't think the crawler esc can handle it . I thought about 3s lipo with the 55T ,but esc can't handle that either. Should I change ESC and ran 3s lipo with 55T ? OR I thought about trying a handwound 45T with 2s lipo on the rooster crawler esc ??? What would my Best option be ? Funds are somewhat limited..... Finding something to fit my budget and my needs is proving to tougher than I thought .... Please HELP !

The Rooster crawler ESC would do fine with a puller.

I am a big fan of 3 and 4s lipo, but you could run a 35t to 20t handwound on 2s lipo to get your speed up. Plenty of options really, and none of them are bad.

Got my Paypal shipping confirmation , thanks John.

thank you sir!"thumbsup" I can't wait to get one of these.:mrgreen:

[quote=JohnRobHolmes;1176860]The Rooster crawler ESC would do fine with a puller.

Well, thats Great. How do I preorder a 7T ? Your website won't allow it . Just let me know, paypal can be sent ASAP..... manoli427@yahoo.com

I can't wait to start braking drive shaft. LOL

You will have to wait until they are on the site toytech, I will probably add them on friday.

John,

Sorry, I've read the entire thread and I am confused because my mind keep saying "get it! get it! get!".

So, may I know if 10T is already out or in pre-order? If pre-order, how long?

How about 7T? Also on pre-orders?

I am international and I have MM and 3S 20C Li-po. Safe??:lol:

7t pullers are about 2 weeks out. The 10t pullers are in the works but its only for the armatures, no time on them yet!"thumbsup"

heya,

I don;t suppose you have a 4m 48dp pinion do you?

I don't have any 4mm pinions.

Presale Cobalt 7t
 

Did I Miss Them Or Does You Site Need Update.

Just put 35 on the site, should be ready to go in two weeks.

Got In On One Thanks. What Should I Order To Control It . Mm Or Sidewinder Or Fxr? Thanks

I got my 7t in today and let me just say....big mistake :lol: I love it :shock:
I'm going to have to go lipo as I am having to ziptie my big 6 cell pack on it right now but it runs great. TONS of wheel speed and great response.
Well worth it John, thanks "thumbsup"

Oh yeah, popping wheelies and doing burnouts around the apartment makes your roommates think you're on crack:-D

got it paid for! I can't wait to get this in my rock racer. Thanks John."thumbsup"

I also ordered a hand wound 35t for the comp rig.

Hey JRH , I just preorder my puller. I can't wait to test it out ! I'm sure its going to be just as great as everyone says it is. Whats a good gearing for a ax10 ? Stock gearing is 14/87

I'm running the same thing but using a 12t pinion that was laying around. It's just right. 14 should work great for you. Going to also depend on how many cells you are running. Tested mine on 6cell sub-c's

Just received mine in the mail today..... Ye Ha