RCCrawler Forums

BigD74 · 04-30-2008, 09:45 AM

I sent you an email yesterday. Just wondering if you got it?

I will re ask one of the questions here just in case.

I am curious as to why a BEC would get programmed for 6v if I will be using a 7.2v stick pack(sub c)?

I am not doubting you just curious.

JohnRobHolmes · 04-30-2008, 10:04 AM

Quote:

Originally Posted by C Pook

Are there any available to order? Tried ordering online and nowhere to click for preorder? Whens the next batch going to be available?

I sold all of the motors in the last batch. When I get this round shipped out I will bring in another batch, should be about 2 weeks.

Quote:

Originally Posted by BigD74

I sent you an email yesterday. Just wondering if you got it?

I will re ask one of the questions here just in case.

I am curious as to why a BEC would get programmed for 6v if I will be using a 7.2v stick pack(sub c)?

I am not doubting you just curious.

The BEC is programmed for the output, the CC BEC comes set to 5.1v stock and 6v is a little livelier for crawling. I got the email but haven't had a chance to respond. I am not at home right now so I can't get to my email.

JohnRobHolmes · 04-30-2008, 10:05 AM

Just got the motors back yesterday. I will be spending the next few evenings inspecting, packaging, and shipping all backorders. Thanks guys! You will love them.

BigD74 · 04-30-2008, 11:18 AM

Thanks for the quick response.

Brainstain · 04-30-2008, 01:45 PM

Quote:

Originally Posted by JohnRobHolmes

Just got the motors back yesterday. I will be spending the next few evenings inspecting, packaging, and shipping all backorders. Thanks guys! You will love them.

SWEEEEET! Doing the happy dance...

rckcrawler · 04-30-2008, 04:47 PM

Very nice video, I wish that would fit in a copperhead!

bigflex · 04-30-2008, 04:58 PM

ok I have a question. I want to run this motor in my rock racer I am building but what esc will I need to get to run it. I only run 7.2v nimh packs. I use 1500 2/3a and also 3300 sc packs. I really don't wanna go lipo and basiclly just need a speedo that will handle this motor with the packs I run. What would be the minimum esc you would recommend?

JohnRobHolmes · 04-30-2008, 05:09 PM

A speedo that would handle a 19t motor would be plenty. For the real load in a rockracer, you can just use your final speed. The ESC will see the same amount of work with a 19t geared to 20mph as a 10t geared to 20mph if you are using the same voltage.

For a nice all around bet the Sidewinder is great. For a smaller ESC the Tekin FX-R is awesome.

bigflex · 04-30-2008, 05:31 PM

Quote:

Originally Posted by JohnRobHolmes

A speedo that would handle a 19t motor would be plenty. For the real load in a rockracer, you can just use your final speed. The ESC will see the same amount of work with a 19t geared to 20mph as a 10t geared to 20mph if you are using the same voltage.

For a nice all around bet the Sidewinder is great. For a smaller ESC the Tekin FX-R is awesome.

sweet thats what I needed to know!

Thanks for the quick reply. If I order one about how long could I expect the lead time to be?

I just emailed you! I tried to pay for one and it won't let me. what do I need to do to be sure I get one out of the new batch?

quattros · 05-01-2008, 11:32 AM

John have you tested this motor with the Sidewinder Micro. It looks like it will take it.

bigflex · 05-02-2008, 05:33 AM

Quote:

Originally Posted by quattros

John have you tested this motor with the Sidewinder Micro. It looks like it will take it.

or maybe a mamba 25?

cartronicshn · 05-02-2008, 04:10 PM

Quote:

Originally Posted by JohnRobHolmes

Just got the motors back yesterday. I will be spending the next few evenings inspecting, packaging, and shipping all backorders. Thanks guys! You will love them.

Still waiting on the invoice for the other stuff so it can ship with this motor.

cartronicshn · 05-02-2008, 05:21 PM

Got it and done

JohnRobHolmes · 05-02-2008, 05:21 PM

You should have an email cartronics

JohnRobHolmes · 05-02-2008, 05:23 PM

Quote:

Originally Posted by bigflex

sweet thats what I needed to know!

Thanks for the quick reply. If I order one about how long could I expect the lead time to be?

I just emailed you! I tried to pay for one and it won't let me. what do I need to do to be sure I get one out of the new batch?

There is a way to get through my shopping cart if you put a US addy in the shipping field. I may have sent you an email about it already.

Quote:

Originally Posted by quattros

John have you tested this motor with the Sidewinder Micro. It looks like it will take it.

I doubt it, but I haven' tried.

Quote:

Originally Posted by bigflex

or maybe a mamba 25?

No way.

BigD74 · 05-02-2008, 05:32 PM

Any idea on time frame for shipping my order, not to rush you or anything.
(two 7T pullers, 2 MM, 3 CC bec's)

cartronicshn · 05-02-2008, 05:33 PM

Quote:

Originally Posted by JohnRobHolmes

You should have an email cartronics

Read post above

JohnRobHolmes · 05-02-2008, 05:53 PM

Quote:

Originally Posted by BigD74

Any idea on time frame for shipping my order, not to rush you or anything.
(two 7T pullers, 2 MM, 3 CC bec's)

If I remember right you sent an email concerning this and have not added the MM and BEC to the order right? I just counted the backorder MM against stock and I will have enough to fill the order. I will send an email to you about the payment, more than likely later this evening.

I will be hiring some help tonight (if she can come over) so that I can process as many orders as possible. It seems that most of my time has been spent on email and phone calls today instead of packaging, although the help I hired in this morning helped prep the motors. Now all I have to do is go through and time them all and package.

BigD74 · 05-02-2008, 06:19 PM

The original order included payment for both the 7T's and 2 MM, and I sent the payment for 3 BEC's just the other day.

Nabil · 05-03-2008, 04:42 PM

what is the minimum number of continuous amps needed to keep a 7t happy? im trying to figure out batteries.

HH Cobalt Puller- Reborn page 35! - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
R1 + Cobalt Puller	Highlucks	G-Made Crawlers	3	05-31-2010 09:38 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-30-2008, 09:45 AM	#181
BigD74 Newbie Join Date: Feb 2006 Location: Surrey Posts: 34	I sent you an email yesterday. Just wondering if you got it? I will re ask one of the questions here just in case. I am curious as to why a BEC would get programmed for 6v if I will be using a 7.2v stick pack(sub c)? I am not doubting you just curious.

04-30-2008, 10:05 AM	#183
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Just got the motors back yesterday. I will be spending the next few evenings inspecting, packaging, and shipping all backorders. Thanks guys! You will love them.

04-30-2008, 11:18 AM	#184
BigD74 Newbie Join Date: Feb 2006 Location: Surrey Posts: 34	Thanks for the quick response.

04-30-2008, 04:47 PM	#186
rckcrawler Quarry Creeper Join Date: Aug 2006 Location: Baumholder Posts: 477	Very nice video, I wish that would fit in a copperhead!

04-30-2008, 04:58 PM	#187
bigflex I wanna be Dave Join Date: Jun 2005 Location: drillin Holes for the man Posts: 2,736	ok I have a question. I want to run this motor in my rock racer I am building but what esc will I need to get to run it. I only run 7.2v nimh packs. I use 1500 2/3a and also 3300 sc packs. I really don't wanna go lipo and basiclly just need a speedo that will handle this motor with the packs I run. What would be the minimum esc you would recommend?

04-30-2008, 05:09 PM	#188
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	A speedo that would handle a 19t motor would be plenty. For the real load in a rockracer, you can just use your final speed. The ESC will see the same amount of work with a 19t geared to 20mph as a 10t geared to 20mph if you are using the same voltage. For a nice all around bet the Sidewinder is great. For a smaller ESC the Tekin FX-R is awesome.

05-01-2008, 11:32 AM	#190
quattros Quarry Creeper Join Date: Jan 2006 Location: San Diego Posts: 212	John have you tested this motor with the Sidewinder Micro. It looks like it will take it.

05-02-2008, 05:21 PM	#193
cartronicshn I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN Posts: 5,076	Got it and done

05-02-2008, 05:21 PM	#194
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	You should have an email cartronics

05-02-2008, 05:32 PM	#196
BigD74 Newbie Join Date: Feb 2006 Location: Surrey Posts: 34	Any idea on time frame for shipping my order, not to rush you or anything. (two 7T pullers, 2 MM, 3 CC bec's)

Sponsored Links

05-02-2008, 06:19 PM	#199
BigD74 Newbie Join Date: Feb 2006 Location: Surrey Posts: 34	The original order included payment for both the 7T's and 2 MM, and I sent the payment for 3 BEC's just the other day.

05-03-2008, 04:42 PM	#200
Nabil no talent hack Join Date: Feb 2007 Location: Redwood City Posts: 2,479	what is the minimum number of continuous amps needed to keep a 7t happy? im trying to figure out batteries.

RCCrawler Forums

Thread: HH Cobalt Puller- Reborn page 35!