Go Back   RCCrawler Forums > Vendors > Holmes Hobbies
Loading

Notices

Thread: (HH) Tech Questions and Customer support thread

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 02-02-2010, 10:43 AM   #2021
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

You won't have problems with the 12t with the MOA berg. It may be a bit quick, but if you do have 9 or 10t pinions available it wouldn't hurt to give them a shot at first.

No worries, you won't break em by running the wrong pinion.
JohnRobHolmes is offline  
Sponsored Links
Old 02-02-2010, 10:54 AM   #2022
Rock Crawler
 
Join Date: Oct 2008
Location: Italy
Posts: 544
Default

ok so when i order (this week) the motors i also order from 9 to 12t pinion
guidetti_angelo is offline  
Old 02-03-2010, 11:38 AM   #2023
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Default

Can I send my 7T Cobalt Puller arm to you so you can cut the comm?
What would be the price, with shipping to 70592?
Here are a few pics to let you see what it looks like. And here is a link to thread I started in Newbie, which will give you some more detail and pics.
Thank you!

Linky





Last edited by shelljeep; 02-03-2010 at 11:40 AM. Reason: sp.
shelljeep is offline  
Old 02-03-2010, 12:45 PM   #2024
Rock Crawler
 
Join Date: Oct 2008
Location: Italy
Posts: 544
Default

hi john i sent you an e mail to your web site address ;)
guidetti_angelo is offline  
Old 02-03-2010, 01:46 PM   #2025
Rock Crawler
 
Join Date: Oct 2008
Location: Italy
Posts: 544
Default

i write you about 2 hh 35t pro hw, are they availables?
guidetti_angelo is offline  
Old 02-04-2010, 01:41 AM   #2026
Newbie
 
Join Date: Feb 2010
Location: lancaster
Posts: 4
Default stock esc question for axil

This is my first post so i hope i did this right. If not im sorry.I was wondering if some one could help me out. Can the stock axil scorpion esc handle a 2 cell 7.4v 2500mah 20c lipo? Im runnin the stock motor. Also i was wondering what kind of run times i should expect. The gears r stock. Thanks for ur help.
djcrawler is offline  
Old 02-04-2010, 11:05 AM   #2027
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

Quote:
Originally Posted by shelljeep View Post
Can I send my 7T Cobalt Puller arm to you so you can cut the comm?
What would be the price, with shipping to 70592?
Here are a few pics to let you see what it looks like. And here is a link to thread I started in Newbie, which will give you some more detail and pics.
Thank you!

Linky
Sure thing. $10 would cut it and ship it back.

Holmes Hobbies
716 W. Sexton rd.
Columbia, MO 65203

Quote:
Originally Posted by guidetti_angelo View Post
i write you about 2 hh 35t pro hw, are they availables?
Yes, they are.

Quote:
Originally Posted by djcrawler View Post
This is my first post so i hope i did this right. If not im sorry.I was wondering if some one could help me out. Can the stock axil scorpion esc handle a 2 cell 7.4v 2500mah 20c lipo? Im runnin the stock motor. Also i was wondering what kind of run times i should expect. The gears r stock. Thanks for ur help.

The stock ESC does not have a voltage cutoff, but otherwise you would be fine.

Last edited by badger; 06-21-2012 at 11:26 AM. Reason: address change
JohnRobHolmes is offline  
Old 02-04-2010, 11:14 AM   #2028
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Question

Outstanding! Will be in the mail today. Should I paypal you the $10?
shelljeep is offline  
Old 02-04-2010, 11:27 AM   #2029
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

yes, be sure to label it with who you are on the forum, and what you are paying for.

paypal at holmeshobbies dot com
JohnRobHolmes is offline  
Old 02-04-2010, 11:53 AM   #2030
Rock Crawler
 
Join Date: Oct 2008
Location: Italy
Posts: 544
Default

listen,i come from Italy,can you ship me by express mail because priority it's too long for Italy? and the shipping costs? thanks otherwise i order 2 hh 45t pro from TCS..
guidetti_angelo is offline  
Old 02-04-2010, 12:25 PM   #2031
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

Email back at you. TCS will have more 35t here soon as well. I can ship via express, but in the interest of saving you a lot of money I would suggest you order everything from TCS.
JohnRobHolmes is offline  
Old 02-04-2010, 12:32 PM   #2032
Rock Crawler
 
Join Date: Oct 2008
Location: Italy
Posts: 544
Default

very kind John,so i write to tcs and i order all items from them..
guidetti_angelo is offline  
Old 02-05-2010, 12:45 AM   #2033
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Default

Quote:
Originally Posted by JohnRobHolmes View Post
yes, be sure to label it with who you are on the forum, and what you are paying for.

paypal at holmeshobbies dot com
John, after closer inspection, I think I feel some rumble in the bearings. Can I send you the entire motor back so that you can give it all a once-over? I'm not sure what it's been through so it would be nice to have someone in the know take a look at everything, bearings, brushes, arm, magnets, etc?
You said $10 to cut the comm and ship back, I didn't paypal you yet, would you like to look at it and tell me what it will cost, based on what it needs? Or I can send you the $10 and we can go from there dependant on what you find? Either way is good with me, just let me know. It will be headed your way in the morning.
Thanks.
shelljeep is offline  
Old 02-05-2010, 06:18 AM   #2034
owner, Holmes Hobbies LLC
 
JohnRobHolmes's Avatar
 
Join Date: Nov 2004
Location: Volt up! Gear down!
Posts: 20,290
Default

Sure, go ahead and send the motor. $10 would give me a way to track you at least, and we can go from there.
JohnRobHolmes is offline  
Old 02-05-2010, 06:54 AM   #2035
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Default

Ok, I'll be headed to the UPS store in a few minutes then. Just get in touch if you feel like it needs anything more than bearings, brushes and a comm cut.
I ordered some brushes along with a CC BEC earlier this week, if it hasn't shipped yet, you can use those?
Will paypal you later this am.
Thanks.
shelljeep is offline  
Old 02-06-2010, 04:39 AM   #2036
Newbie
 
Join Date: Nov 2009
Location: Lincoln
Posts: 11
Default

The programming sequence is always presented in sequential order and always starts with the first setting (No cutoff voltage) within the first section (Cutoff Voltage). The first beep(s) signifies which section of the programming you are in and the second beep(s) signifies which setting is waiting for a "yes" or "no" answer Ok how do I tell the esc yes or no with my tx
hagus is offline  
Old 02-06-2010, 08:08 PM   #2037
Newbie
 
Join Date: Sep 2009
Location: Florence
Posts: 2
Default

I am looking for a radio and receiver for my high lift. I was told that a Spektrum 3.0 pistol would work. I have seen guys using DX6 and DX7. I went to the local hobbie store and they say they are for airplane use but these don't use a specific channel will one of these work?
brtman77 is offline  
Old 02-07-2010, 09:09 AM   #2038
Pebble Pounder
 
Join Date: Dec 2009
Location: scotts valley
Posts: 165
Default

Hello John,
I purchased a BR-XL from you a few weeks ago. I ran it many times with nimh. I have just run my first lipo through it and the autocut lipo function cutoff way to late. It let my 11.1v go down to 7.48v. I set it up for auto with the stick programming function. What should I do? I don't want to keep running this brand new lipo down so far.
Thanks, Chris
crawlerpillar is offline  
Old 02-09-2010, 04:18 PM   #2039
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Default

Quote:
Originally Posted by JohnRobHolmes View Post
Sure, go ahead and send the motor. $10 would give me a way to track you at least, and we can go from there.
You should be receiving my motor today. Looks like I may need one of your Torquemasters now also, just fried the Night Crawler's ESC. Can we add that to the motor rebuild?
I forgot to paypal you $10 earlier, sorry. Will do it now with detailed notes to help you keep track. Let me know how you'd like to handle payment on the esc add-on.
Any idea when you will ship them?
Thanks, Shell
shelljeep is offline  
Old 02-09-2010, 04:25 PM   #2040
RCC Addict
 
shelljeep's Avatar
 
Join Date: Jan 2010
Location: Lafayette
Posts: 1,077
Default

Quote:
Originally Posted by JohnRobHolmes View Post
paypal at holmeshobbies dot com
Is this a typo? Do you want me to just use your business email for the paypal?
If you want, you can pm me a price including the motor repair, and Torquemaster esc, and I'll just go ahead and pay it in full. Whatever is easier for you and faster for me.
shelljeep is offline  
Closed Thread



(HH) Tech Questions and Customer support thread - Similar Threads
Thread Thread Starter Forum Replies Last Post
Futaba customer support XJkid93 Chit Chat 6 07-24-2012 06:07 PM
ZNO-RC Customer Support ZNO-RC Redcat Crawlers 28 03-20-2012 08:44 PM
axial customer support/service THANKS! superflex General Crawlers 6 01-31-2011 08:40 PM
airtronics customer support dlamb11877sf Electronics 0 04-13-2010 10:04 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com