02-02-2010, 10:43 AM | #2021 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
You won't have problems with the 12t with the MOA berg. It may be a bit quick, but if you do have 9 or 10t pinions available it wouldn't hurt to give them a shot at first. No worries, you won't break em by running the wrong pinion. |
Sponsored Links | |
02-02-2010, 10:54 AM | #2022 |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
|
ok so when i order (this week) the motors i also order from 9 to 12t pinion |
02-03-2010, 11:38 AM | #2023 |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
|
Can I send my 7T Cobalt Puller arm to you so you can cut the comm? What would be the price, with shipping to 70592? Here are a few pics to let you see what it looks like. And here is a link to thread I started in Newbie, which will give you some more detail and pics. Thank you! Linky Last edited by shelljeep; 02-03-2010 at 11:40 AM. Reason: sp. |
02-03-2010, 12:45 PM | #2024 |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
|
hi john i sent you an e mail to your web site address ;)
|
02-03-2010, 01:46 PM | #2025 |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
|
i write you about 2 hh 35t pro hw, are they availables?
|
02-04-2010, 01:41 AM | #2026 |
Newbie Join Date: Feb 2010 Location: lancaster
Posts: 4
| stock esc question for axil
This is my first post so i hope i did this right. If not im sorry.I was wondering if some one could help me out. Can the stock axil scorpion esc handle a 2 cell 7.4v 2500mah 20c lipo? Im runnin the stock motor. Also i was wondering what kind of run times i should expect. The gears r stock. Thanks for ur help.
|
02-04-2010, 11:05 AM | #2027 | ||
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Quote:
Holmes Hobbies 716 W. Sexton rd. Columbia, MO 65203 Yes, they are. Quote:
The stock ESC does not have a voltage cutoff, but otherwise you would be fine. Last edited by badger; 06-21-2012 at 11:26 AM. Reason: address change | ||
02-04-2010, 11:14 AM | #2028 |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
|
Outstanding! Will be in the mail today. Should I paypal you the $10?
|
02-04-2010, 11:27 AM | #2029 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
yes, be sure to label it with who you are on the forum, and what you are paying for. paypal at holmeshobbies dot com |
02-04-2010, 11:53 AM | #2030 |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
|
listen,i come from Italy,can you ship me by express mail because priority it's too long for Italy? and the shipping costs? thanks otherwise i order 2 hh 45t pro from TCS..
|
02-04-2010, 12:25 PM | #2031 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Email back at you. TCS will have more 35t here soon as well. I can ship via express, but in the interest of saving you a lot of money I would suggest you order everything from TCS.
|
02-04-2010, 12:32 PM | #2032 |
Rock Crawler Join Date: Oct 2008 Location: Italy
Posts: 544
|
very kind John,so i write to tcs and i order all items from them.. |
02-05-2010, 12:45 AM | #2033 | |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
| Quote:
You said $10 to cut the comm and ship back, I didn't paypal you yet, would you like to look at it and tell me what it will cost, based on what it needs? Or I can send you the $10 and we can go from there dependant on what you find? Either way is good with me, just let me know. It will be headed your way in the morning. Thanks. | |
02-05-2010, 06:18 AM | #2034 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
Sure, go ahead and send the motor. $10 would give me a way to track you at least, and we can go from there.
|
02-05-2010, 06:54 AM | #2035 |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
|
Ok, I'll be headed to the UPS store in a few minutes then. Just get in touch if you feel like it needs anything more than bearings, brushes and a comm cut. I ordered some brushes along with a CC BEC earlier this week, if it hasn't shipped yet, you can use those? Will paypal you later this am. Thanks. |
02-06-2010, 04:39 AM | #2036 |
Newbie Join Date: Nov 2009 Location: Lincoln
Posts: 11
| The programming sequence is always presented in sequential order and always starts with the first setting (No cutoff voltage) within the first section (Cutoff Voltage). The first beep(s) signifies which section of the programming you are in and the second beep(s) signifies which setting is waiting for a "yes" or "no" answer Ok how do I tell the esc yes or no with my tx |
02-06-2010, 08:08 PM | #2037 |
Newbie Join Date: Sep 2009 Location: Florence
Posts: 2
|
I am looking for a radio and receiver for my high lift. I was told that a Spektrum 3.0 pistol would work. I have seen guys using DX6 and DX7. I went to the local hobbie store and they say they are for airplane use but these don't use a specific channel will one of these work?
|
02-07-2010, 09:09 AM | #2038 |
Pebble Pounder Join Date: Dec 2009 Location: scotts valley
Posts: 165
|
Hello John, I purchased a BR-XL from you a few weeks ago. I ran it many times with nimh. I have just run my first lipo through it and the autocut lipo function cutoff way to late. It let my 11.1v go down to 7.48v. I set it up for auto with the stick programming function. What should I do? I don't want to keep running this brand new lipo down so far. Thanks, Chris |
02-09-2010, 04:18 PM | #2039 | |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
| Quote:
I forgot to paypal you $10 earlier, sorry. Will do it now with detailed notes to help you keep track. Let me know how you'd like to handle payment on the esc add-on. Any idea when you will ship them? Thanks, Shell | |
02-09-2010, 04:25 PM | #2040 |
RCC Addict Join Date: Jan 2010 Location: Lafayette
Posts: 1,077
| Is this a typo? Do you want me to just use your business email for the paypal? If you want, you can pm me a price including the motor repair, and Torquemaster esc, and I'll just go ahead and pay it in full. Whatever is easier for you and faster for me. |
(HH) Tech Questions and Customer support thread - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Futaba customer support | XJkid93 | Chit Chat | 6 | 07-24-2012 06:07 PM |
ZNO-RC Customer Support | ZNO-RC | Redcat Crawlers | 28 | 03-20-2012 08:44 PM |
axial customer support/service THANKS! | superflex | General Crawlers | 6 | 01-31-2011 08:40 PM |
airtronics customer support | dlamb11877sf | Electronics | 0 | 04-13-2010 10:04 AM |
| |