RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Holmes Hobbies (http://www.rccrawler.com/forum/holmes-hobbies/)
-   -   Motor/ ESC Combos! (http://www.rccrawler.com/forum/holmes-hobbies/94994-motor-esc-combos.html)

JohnRobHolmes 12-07-2007 10:10 AM

Motor/ ESC Combos!
 
Looking for some ESC and motor combos at reduced prices? We keep them here on the site!

http://holmeshobbies.com/home.php?cat=4

Racer4Life 12-07-2007 09:07 PM

Nice combo's. Great prices too. I may need to order one or two.

JohnRobHolmes 12-09-2007 10:43 AM

Added a few more combos to the site last night. Feel free to suggest any more that you want.

flomofo 12-15-2007 09:31 PM

downhill
 
do any of these give drag when going down hill on the throttle so it doesnt start to free wheel? which ons is the best if money is no object?

4u2nv 12-15-2007 09:34 PM

What's this....
Speedy Scaler Combo- Quark 33 or L38 ESC with a FAST outrunner- quite the punch for hassle free running and smooth throttle.

I have a Mamba maxx right now and am looking for a motor with some speed but still able to climb stuff. Will this motor work?

JohnRobHolmes 12-19-2007 09:13 AM

Quote:

Originally Posted by flomofo (Post 965482)
do any of these give drag when going down hill on the throttle so it doesnt start to free wheel? which ons is the best if money is no object?

All of the ESCs I carry have true drag brake. If money is no object get the mamba max for brushed/brushless or the quark 33 if you want brushless only.

Quote:

Originally Posted by 4u2nv (Post 965491)
What's this....
Speedy Scaler Combo- Quark 33 or L38 ESC with a FAST outrunner- quite the punch for hassle free running and smooth throttle.

I have a Mamba maxx right now and am looking for a motor with some speed but still able to climb stuff. Will this motor work?

The motor will work, but it won't start up as smoothly as with the quark 33 or l38. I haven't been able to test it in a full bind with the mamba max either, so I can't guarantee that it will start up.

gopher 12-20-2007 09:53 AM

I love the speed combo... I would love to see the actual speed of that to get an idea...

my crawler is being modified into a semi-basher since no comps around here I can make so it would make sense :)

spicer3 08-21-2008 01:53 PM

Quote:

Originally Posted by JohnRobHolmes (Post 953276)
Finally, I got some combos up on the site! I will be working all day to improve, update, and add more combos. So far we have:

, only $80.99! Very smooth, great little package.
Crawlmaster Sport and Quark 33 combo, Great for smooth throttle and plenty of power.
Crawlmaster Sport and Mamba Max combo, Tons of power and voltage overhead- capability to run any brushed or brushless motor you want down the road.
Speedy Scaler Combo- Quark 33 or L38 ESC with a FAST outrunner- quite the punch for hassle free running and smooth throttle.
Tow rig special- Mammoth 3032 outrunner with a mamba max, enough power to haul me around (no joke).
Ultimate 2.2 Comp setup- Cobalt Puller 5t, Mamba max, and CC BEC. Power, Power, Power!

Will update with more, I have quite a few to add as the day progresses.






i was just wondering about the budget crawler combo is it anny good?
and i have a axial i would like not to have to buy a new battery it is A 6 cell NI-MH (3300) and would it work.. it also has deans connectors.:?::?:

Joat 08-21-2008 03:32 PM

Looking for a combo that would equal your 35t handwound?
I have a old rooster esc ,not looking for comp, just something for my cr01 that would equal your 35t handwound,TIA!

drcooper 09-11-2008 12:29 PM

Is there a lot of work to make the GWS 2215 fit a Pede tranny?
Especially for the wires...

Norcal_GIT_r 09-14-2008 09:17 AM

How about a combo for the Cliff Climber.?

Prostreet 09-15-2008 12:02 AM

Sorry John, posted in wrong section I believe. I will repost.

JohnRobHolmes 09-26-2008 08:25 AM

I just got in more sidewinder combos, both 4600 and 5700kv versions.

Quote:

Originally Posted by spicer3 (Post 1312797)
i was just wondering about the budget crawler combo is it anny good?
and i have a axial i would like not to have to buy a new battery it is A 6 cell NI-MH (3300) and would it work.. it also has deans connectors.:?::?:

I have stopped selling the budget combo. It is pretty good, but would be very lackluster on low voltage.

Quote:

Originally Posted by Joat (Post 1312934)
Looking for a combo that would equal your 35t handwound?
I have a old rooster esc ,not looking for comp, just something for my cr01 that would equal your 35t handwound,TIA!

Nothing will match them, except another 35t handwound! I would run a tekin fxr with the handwound, personal favorite.

Quote:

Originally Posted by drcooper (Post 1339678)
Is there a lot of work to make the GWS 2215 fit a Pede tranny?
Especially for the wires...

With my adapter plate, you just bolt it in.

Quote:

Originally Posted by Norcal_GIT_r (Post 1343642)
How about a combo for the Cliff Climber.?

Nothing at this time. It would just be two puller 454's and a tekin FXR or sidewinder.

nothinbutpower 09-28-2008 12:56 AM

What is the difference between the Cobalt Puller 454 and the Cobalt Puller 7T? I have a TXT 1 that is basically stock that I want to do mostly mudding/ trails and some crawling. I'm very open to ideas/ combos. I saw Badger's set up on his crawler and thought it was really cool! He's using the 7T motor. Plus my truck comes with a stock twin motor setup that I thought I might like to use for extra power/speed. I would also like an opinion on an esc as well. I plan on using a 3S Lipo battery when all is said and done. Thanks for the advise in advance!

JohnRobHolmes 09-28-2008 08:31 AM

The 454 is very small, the 7t is like a 550 motor. I would use a Mamba Max for your rig.

nothinbutpower 09-29-2008 10:26 AM

Cool! I'll be in touch when I get paid next so I can get at least 1 if not 2 of those 7t motors. How long would it take to get them shipped to Illinois?

JohnRobHolmes 09-29-2008 10:40 AM

Two days tops. I am in missouri.

drcooper 10-03-2008 01:59 AM

Just received my combo... Seems like I'm the last to have had your budget combo? Works like a charm with 10 cells!

cooterwrenchen 01-11-2009 11:27 AM

boo the pullers wont fit in my swx with th r2d

ROCKCAD 02-05-2009 03:51 PM

tekin fxr
 
when are you going to have tekin fxr ?...thanks


All times are GMT -6. The time now is 10:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com