|
R2J builds a C2 Venture 3 Attachment(s) Been away for a bit but couldn't stay away long it seems. :lmao: I've always liked venturing out, no pun intended, trying the different brand rigs available, but always came back to old reliable Axial. However, the Venture looks to be very well thought out by HPI and appears that it will be a very good performing platform to base a competitive scale rig on. So looking to attend Zia Scale Nationals this year in New Mexico, I needed to build a new C2 rig and luckily found this Venture locally for a steal, $100 RTR! It had a broken chub and missing dog bone and was pretty dirty, but definitely had potential. After disassembly, cleaning and making the small repairs needed, I got it up and running. Plan of attack begins...... Parts list: - Radio- Spektrum DX5R - ESC-Castle MambaX - Motor-Holmes brushless 540 Trail Master 3300kv - Servo- Spektrum S6280 - Servo Winch- ? - Tires- Pit Bull 1.9 Rock Beasts - Foam- Pit Bull Dirty Richard 4.5 x 1.5 Leaner (medium) - Wheels- LURC Trail Ready A08 w/Agile rings - HPI Universals - Beef Tubes (front) - STRC Brass Chubs - STRC Brass Knuclkes - HPI Brass axle weights (rear) - Bow House printed skid - R2j Kustoms stainless links 12.25" wheelbase - LURC scale hardware - Stock drive train - RC4WD TF2 Yota cab and cab back - RC4WD TF2 round headlight grille - RC4WD interior - R2j Kustoms custom sliders and stainless tube truggy back half - More to come..... How it sits now waiting for the cab to get here. Going to make up a set of my FSL-2 Sliders for the Cruiser body and possibly offer link sets for it. Attachment 378881 Attachment 378882 Attachment 378883 |
Re: R2J builds a C2 for Zia Scale Nationals 4 Attachment(s) Chubs, knuckles and skid came in today so found some time to throw them in along with the beef tubes. The Bow House skid is quite nice and I had zero issues installing. Only thing I did was drill the link mount and t-case holes with an 1/8" bit to clean them up. Drive shafts clear better than the stock skid and you loose the bump that hangs down from the bottom. Nice and smooth now. And always the Beef Tube fit as they should and the STRC brass chubs and knuckle fit perfect and have a nice black finish. Attachment 378884 Attachment 378885 Attachment 378886 Attachment 378887 |
Re: R2J builds a C2 for Zia Scale Nationals Killer deal on the rig! Looks great with the LURC wheels "thumbsup" |
Re: R2J builds a C2 for Zia Scale Nationals Quote:
Yep! Couldn't pass it up! Thanks! Love my Locked Up wheels! |
Re: R2J builds a C2 for Zia Scale Nationals So does this centre skid lift the gearbox up? Surely you'd lose the almost straight line of the driveshaft which is a key feature? |
Re: R2J builds a C2 for Zia Scale Nationals 1 Attachment(s) Quote:
No you don't, nice and straight. Attachment 378977 |
Re: R2J builds a C2 for Zia Scale Nationals 5 Attachment(s) Let the transformation begin. Starting with pinching the front. Attachment 378972 Attachment 378973 Attachment 378974 Attachment 378975 Attachment 378976 |
Re: R2J builds a C2 for Zia Scale Nationals what is the benefit of that printed skid over the hpi skid? (other than losing the fake transfer case bump on the bottom) |
Re: R2J builds a C2 for Zia Scale Nationals Quote:
Loosing the bump, it seemed to get hung up, and preference. I would rather have it flat like that. |
Re: R2J builds a C2 for Zia Scale Nationals 4 Attachment(s) Body is mounted so I can start the tube work. Liking the grille set up like this, may change yet, but for now I'm thinking of filling in between the grille and fenders then add a couple of lights in the filler. Attachment 379001 Attachment 379002 Attachment 379003 Attachment 379004 |
Re: R2J builds a C2 for Zia Scale Nationals Oh I'm liking where this is going. That grill could get interesting, looking forward to something different. |
Re: R2J builds a C2 for Zia Scale Nationals Looks a like a cool build so far. Cant wait too see it finished. Sent fra min SM-J510FN via Tapatalk |
Re: R2J builds a C2 for Zia Scale Nationals Agreed. This is a nice build. I have ordered the same skid for my kit. |
Re: R2J builds a C2 for Zia Scale Nationals Quote:
I may look at building one out of Delrin down the road. |
Re: R2J builds a C2 for Zia Scale Nationals Quote:
|
Re: R2J builds a C2 for Zia Scale Nationals Build is looking good! |
Re: R2J builds a C2 for Zia Scale Nationals Quote:
I really like where this going "thumbsup" Do you have any pictures on how you mount the body? |
Re: R2J builds a C2 for Zia Scale Nationals I ordered the High Res version from Shapeways. A bit more expensive, but should be good. I have some shapeways parts on my Twin Hammers and they are well made. |
Re: R2J builds a C2 for Zia Scale Nationals 4 Attachment(s) Test fitted the RC4WD detailed interior to make sure the ESC and battery fit. Looking good! Plenty of room to mount the battery and a servo winch on the slider/body mounts. Also received the new Spektrum 6280 steering servo. Going to run it at 8.4v to achieve 496oz/in. Attachment 379035 Attachment 379036 Attachment 379037 Attachment 379038 |
Re: R2J builds a C2 for Zia Scale Nationals I really like the sliders. Any pictures of them without the body? |
| All times are GMT -6. The time now is 09:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com