Venture Max Gear down Motor Mount I've made up a replacement motor/servo mount that will allow gearing down to a 10T pinion. modifications to the motor plate are required. I've uploaded the motor mount to Thingiverse where you can download it for free https://www.thingiverse.com/thing:3569491 https://i.imgur.com/dMeldRMl.png There are some things to keep in mind with this print, there's one hole needing tapping as I simply cant add any more material to get clearance for the max gear down (which is the whole goal of this). This hole may split open even if its tapped but it can be glued up with CA, install an M3 in this hole when doing this. Even after splitting this hole I didn't have any issues stripping it but be careful not to overtighten. https://i.imgur.com/VekRvFXl.jpg the stock button head screw needs to be replace with a 15-16mm socket head M3 for clearance. https://i.imgur.com/Lewv0Fil.jpg You will also need to slot the motor mount holes. The center hole and the slotted hole need to be extended along with the plastic piece to get as low as possible. I didn't measure but i think it may have been 3-4mm in the center and 4-8mm on the motor mount slot/hole https://i.imgur.com/mTGi6zIl.jpg https://i.imgur.com/cdCojg8l.jpg https://i.imgur.com/Jx6BqxGl.jpg You will need to install the servo and spacers before you connect it the the transmission. I also include some 5mm servo spacers in the download that correct the steering geometry and align the steering and panhard links. If you use these you'll need four 15 or 16mm tapered head m3's. The servo mount also requires four M3 locknuts. |
Re: Venture Max Gear down Motor Mount Nice work man! |
All times are GMT -6. The time now is 07:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com