LC70 Venture Time 4 Attachment(s) Starting with a SBK that I picked up on here last week, couldn't pass up the deal! It came with some nice upgrades and a bunch of new extras and take offs including ESC, servo and a couple of motors. This will be my Class 1 rig. Parts List: - Killer Body LC70 - Killer Body detailed interior - Loops Rubber Flares - CCHand Trifecta bumper - Pit Bull PBX AT 1.9 tires - RC4WD Tango Down 1.9 wheels - Locked Up RC scale hubs - Locked Up RC scale hardware - SSD aluminum C-Hubs - SSD brass knuckles - STRC brass lock outs - Savox 1230 servo - HW 1080 ESC - Brood 35t - Deadloc t-case Took this and turned it..... Attachment 385164 Attachment 385165 Attachment 385166 into this"thumbsup" Attachment 385167 |
Re: LC70 Venture Time Nice parts list! i need to build the 2 i got...you've given me an idea. |
Re: LC70 Venture Time Nice solid start! I really like that front bumper, I've been trying to figure out which one to run for my Trail King LC70. I'm curious if this bumper allows you to push it inwards any more? I'm not afraid to modify mounts if thats all it needs. Oh and those Pit Bull PBX's are great too, a really underrated tire. |
Re: LC70 Venture Time Very solid looking start. I'm interested to see where you take take this. I see you've chosen to leave the stock shocks alone at least temporarily which I think is a smart choice. The stock shocks are pretty nice (even though I've replaced mine). |
Re: LC70 Venture Time 5 Attachment(s) Quote:
Quote:
Here are a few pictures of the bumper mount and how I mounted it. It just worked out that the bumper had two holes in the mount that matched the pin hole on the chassis bumper mount. In the picture it is mounted in the furthest rear hole, but I moved it up to the first hole to get the wheel base right on. Attachment 385188 Attachment 385189 Attachment 385190 Quote:
I ordered a pair of SSD's for the front and pictures show what I am doing in the rear to keep the bed clear of holes. I will most likely pick up a different set for the rear too. Some work to come will be bobbing the bed, paint details, full light kit and sliders to start. I also have a set of the wider rubber fender flares coming from Loops to get full tire coverage and open up the front wheel opening. Attachment 385191 Attachment 385192 |
Re: LC70 Venture Time Thanks for the bumper pictures I was scouring the internet last night for different angles so these are great. I dont know if you have a 3D printer or not but I've made a printable jig for bobbing the LC70 bed, it removes 40mm off the rear of the bed. I was planning to post it on Thingiverse eventually, let me know if that would help you at all and I'll put it up (it was a 35 hour print though). You can see pictures in my Trail king build thread (posts 16 and 20) http://www.rccrawler.com/forum/ssd-t...ml#post5966504 |
Re: LC70 Venture Time 1 Attachment(s) Quote:
I've been looking at printers, but haven't picked one up yet. Honestly though, the LC is by far one of the easiest beds to bob with the tailgate/bed end coming as a separate piece. Here's a picture of my last LC70 on a SCX10.2 chassis...so basically this is how it will look when I'm done minus the bed bar. Attachment 385268 |
Re: LC70 Venture Time Dang that LC-70 body is hawt, are you gluing it together and cutting out the extra styrene internal bracing? IE in the roof area to lowere COG? :) Edit: Hmmm just looked at the Killerbody LC70 again and they show the roof as molded in, maybe the ones I"m thinking of were the early version bodies? Found they list differences in old and new body kits, but didn't see the internal cab/roof cross bracing mentioned, here: https://store.killerbody.com/product...it-diy-version |
Re: LC70 Venture Time Quote:
|
Re: LC70 Venture Time 5 Attachment(s) Small update, I got side tracked by my Enduro build. Painted the engine compartment and behind the grill area along with the interior. I also received my fender flares from Loops today, installed one quick to take a picture. If you have never used them they are made from a hard but flexible rubber that you glue to the body and if wanted, you can drill through the body and flare to secure in addition to the glue. You will need to trim a couple of spots in the front since they increase the wheel well opening a bit, rear is just right. Fit and finish is perfect. Attachment 385316 Attachment 385317 Attachment 385318 Attachment 385319 Attachment 385320 |
Re: LC70 Venture Time I really like those flares, I wish I knew about those before installing the Killer Body set. I cant seem to find those on their site, how wide are they? EDIT: Never mind google found them, 10mm each and 20mm wider overall. http://www.rc4x4-shop.com/Toyota-Lan...r-Set-d259.htm |
Re: LC70 Venture Time 6 Attachment(s) Quote:
Attachment 385354 Making some progress! The Killer Body option detailed interior is a real nice piece. Went together perfect and has a ton of detail. Seat base, back and headrest have a plastic skeleton that get clad in a rubber cover, headrests move up and down and seats ride on tracks that allow them the to move back and forth. Another feature is the LED back lit gauge cluster and center dash area, very cool. Next purchase will be the option parts to make the doors and hood open and the windows to roll up and down."thumbsup" Body is just about done, minus bobbing the bed. Attachment 385355 Attachment 385356 Attachment 385357 Attachment 385358 Attachment 385359 |
Re: LC70 Venture Time The interior looks great! I've been waffling on whether to order it but now I have to get one :ror: Does it have to option to be right or left hand drive like the stock dash(s)? One thing I found about my set of doors was that there are a few bits on the inside getting in the way of it aligning nicely. There are 3 round features on the bottom from the molding process I guess. I shaved them down and got a much better fit, one side was okay to start and the other was very poor. I just used a razer and scraped side to side, sanding seemed like it would have taken ages. You're making great progress, definitely pushing me to get back to work on mine! |
Re: LC70 Venture Time Sexay! "thumbsup" |
Re: LC70 Venture Time Yeah man, that interior is some next level shit. Maybe I'll sell my full size truck and buy your Venture to drive around in. |
Re: LC70 Venture Time Quote:
I didn't have any trouble with my doors, it all seemed to fit well. Quote:
Quote:
|
Re: LC70 Venture Time 2 Attachment(s) Not much to update yet, waiting for some more parts to come in. Ordered the hood and door hinge kits. Door kit comes with the operable window mechanism. Attachment 385523 Attachment 385524 |
Re: LC70 Venture Time Quote:
|
Re: LC70 Venture Time While this sort of thing is not something I would do, probably because I'd cry when I inevitably broke it, I can appreciate the artistry involved. Your rig looks great and the amount of time, money and effort you have put into it shows and is a credit to you. I love to look at it, but I would be scared to drive it. Sent from my LG-H870DS using Tapatalk |
Re: LC70 Venture Time Awesome build! |
All times are GMT -6. The time now is 12:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com