|
| LinkBack | Thread Tools | Display Modes |
02-13-2008, 06:24 PM | #1 |
Newbie Join Date: Feb 2008 Location: Central Valley
Posts: 19
| Where did 6915 go? (15t pinion gear)
I tried looking for this part number at Tower Hobbies and they don't even show it out of stock (it is just plain gone), when I search HPI, they show it out of stock. Is there something else that everyone is using for a pinion gear? The HPI stage 1 uses the 48P 96T spur gear (#6996), and I was able to find that one ok. Is there another gear combo that is appropriate for crawling? Thanks! |
Sponsored Links | |
02-13-2008, 06:53 PM | #2 |
Rock Crawler Join Date: Oct 2007 Location: richmond, va
Posts: 766
|
just get a 15t gear from another brand in 48 pitch
|
02-13-2008, 07:27 PM | #3 |
Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ
Posts: 3,073
|
Yeah...just use another one. Any 15t 48 pitch pinion that fits an 1/8" shaft will work...doesn't have to be that exact part number.
|
02-13-2008, 08:07 PM | #4 |
Quarry Creeper Join Date: Feb 2008 Location: Clymer, NY
Posts: 394
|
Tower Sux! The discontinue stuff way too often, but they dont ever have it in their clearance section. It just seems to disapear. I bet the employees have one hell of a stock of RCs at home.
|
02-13-2008, 08:08 PM | #5 |
Quarry Creeper Join Date: Jan 2007 Location: I live in my own world,they know me here
Posts: 402
|
48P gears are easy enough to find anywhere
|
02-13-2008, 08:17 PM | #6 |
Quarry Creeper Join Date: Jan 2008 Location: Calabash, NC
Posts: 348
|
My LHS said the pinion was discontinued. Also, I've heard issues about the cover fitting over the 96t spur, so I decided to order a 93t and it was discontinued as well. ...and I thought HPI only discontinued parts for the Savage every six months. :-P But yeah, 15t, 48p pinions are plentiful in nature. |
02-14-2008, 06:58 AM | #7 | |
Rock Stacker Join Date: Feb 2008 Location: Charlotte
Posts: 97
| Quote:
| |
02-14-2008, 10:52 AM | #8 |
Quarry Creeper Join Date: Jan 2008 Location: Calabash, NC
Posts: 348
| |
02-23-2008, 11:33 PM | #9 |
Newbie Join Date: Sep 2005 Location: San Diego
Posts: 41
|
Just bought some gears today and of course they didnt have what I needed. So I went 13 Pinion and a 90 Spur. Will this be ok to run?
|
02-24-2008, 01:17 AM | #10 |
Quarry Creeper Join Date: Jan 2008 Location: Eagle Mountain, Utah
Posts: 311
|
I dont think the gears will mesh well with 13/90. (90 is the stock size btw) I run 14/96 and i cant get them to mesh as tight as I'de like.
|
02-24-2008, 06:39 AM | #11 |
Rock Stacker Join Date: Feb 2008 Location: Charlotte
Posts: 97
|
Yeah I had trouble getting 13/96 to mesh well, it worked but it was really loud, which lead me to believe it would eventually strip the spur. I ended up with 18/96. That is a good gearing for me, running a rooster crawler 55t combo. After playing with this awhile, I think 13/96 would have been way too low anyway, because wheelspeed at 18/96 is about right. That depends on your motor and how you drive it of course.
|
02-24-2008, 10:47 AM | #12 |
Rock Crawler Join Date: Sep 2007 Location: Denmark
Posts: 904
|
I use a traxxas 66/12 32p |
Thread Tools | |
Display Modes | |
| |