RCCrawler Forums

chongdigga · 03-23-2010, 12:03 PM

I went to order a set of CVDs from RCP but they were sold out so I ordered 2 CVD outer axles. I received the wrong parts yesterday and e-mailed them about it and asked if they plan on re stocking the full sets. They returned my e-mail with a snotty ass e-mail saying "They sent me what we had talked about, All the little peices, and if you wanted the outer shaft than its not little" Never $uckin talked to anyone. I ordered part #WK10215 outer axle and they sent me 2 outer axles for a 1/8 buggy with internal threads.

No little peices so I dont know what the hell they are talking about. I sent a very sweet response

As for the CVDs they have no plans on making anymore. I told them that from a money making business stand point that would be a dumb move. I told them about the steel tranny builds here and that people will need CVDs and that the WK isnt dead yet by far.

I'm pretty sure RCP is the only place to get MIP CVDs but if I'm wrong PLEASE tell me.

I think we could persuade RCP with a few E-mails.
rockpiledriver@rcpcrawlers.com
or
info@rcpcrawlers.com
or maybe some phone calls
909 233 8223

Rockpiledriver · 03-23-2010, 12:39 PM

Well I had you confused with someone else sorry about that.

Here is an exact copy of the "snotty as-email" I sent.

I thought I asked and you said it was all the small parts missing? Isn't that what you received? If you were missing an axle part that is not one of the small parts. No we do not plan to make the WK CVD's again after these are gone.

To clarify that, I wanted to be sure exactly what was missing before I shipped what I thought was a second request for the same thing.

Your reply was what I needed to know in the first place.

As for the WK CVD's It will take more than just a few e-mails and or calls to make that happen. Our last lot has lasted almost 3 years. What that means is the minimum order of these is HUGE and EXTREMELY expensive. Sales of these have just not been strong enough to restock currently. I hate it that this is the case, but unless people buy a product, any product, consistently over it's projected sales life, it is hard to expect a company to restock.

chongdigga · 03-23-2010, 12:55 PM

Well my 1st email had my order # and part # at the top. Sorry about my anger towards this but I have $2,000 invested in my WK and I'm just a little pissed that the next time I break a CVD it will be the last time I get to bash my truck.

Scattman · 03-23-2010, 01:28 PM

$2000

Are you kidding?

chongdigga · 03-23-2010, 01:31 PM

Quote:

Originally Posted by Scattman

$2000

Are you kidding?

Since day 1 easily over $2,000. Checkout my build.

I shit you not you are my favorite turd.

Scattman · 03-23-2010, 01:38 PM

OK, I guess if you count every part you have ever bought for it.

You said $2000 in it so I looked at the pics and thought "Damn, someone stuck it to him"

SnoopMaxx · 03-23-2010, 01:50 PM

Damn 3 years

chongdigga · 03-23-2010, 01:51 PM

I dont know what pics you were looking at but I think my truck is pretty sick. Not saying I would pay 2Gs for it as it stands, but I have bought every part for it. I got this truck brand new bone stock 2 years ago. It is just about as bulletproof as you can make a WK and just about every mod known for it. (keeping the MT look) Even mailed my tranny to Denmark for some custom steel gears and a slipper clutch install.

SnoopMaxx · 03-23-2010, 02:00 PM

I bet that was the single scariest thing you have ever done, not knowing if you would ever see that tranny again

chongdigga · 03-23-2010, 02:03 PM

Quote:

Originally Posted by SnoopMaxx

I bet that was the single scariest thing you have ever done, not knowing if you would ever see that tranny again

I trusted you Snoop. Your a good guy.

SnoopMaxx · 03-23-2010, 02:17 PM

and the gears are still fine ??

chongdigga · 03-23-2010, 02:20 PM

Still look brand new.

SnoopMaxx · 03-23-2010, 02:32 PM

Jonny you could use a set of LOSI LST cvd's like I did on my BTA axle, and make your axles a little wider at the same time

TOMS97ZJ · 03-23-2010, 03:37 PM

Quote:

Originally Posted by Rockpiledriver

Well I had you confused with someone else sorry about that.

Here is an exact copy of the "snotty as-email" I sent.

I thought I asked and you said it was all the small parts missing? Isn't that what you received? If you were missing an axle part that is not one of the small parts. No we do not plan to make the WK CVD's again after these are gone.

To clarify that, I wanted to be sure exactly what was missing before I shipped what I thought was a second request for the same thing.

Your reply was what I needed to know in the first place.

As for the WK CVD's It will take more than just a few e-mails and or calls to make that happen. Our last lot has lasted almost 3 years. What that means is the minimum order of these is HUGE and EXTREMELY expensive. Sales of these have just not been strong enough to restock currently. I hate it that this is the case, but unless people buy a product, any product, consistently over it's projected sales life, it is hard to expect a company to restock.

How many units need to be ordered?

How many people need to be interested in order for you to place an order?

I know I would like to have 2 sets.

I tried messaging your company on 2 different occasions and never got any kind of response.

Sucks to hear you don't want to order any more, but maybe we can change that if there is enough interest???

BigBaller · 03-23-2010, 03:48 PM

Sorry Brian I have to...

Seriously? A $2000 WK?

Why not an HPI Stadium truck? I know the RS4MT has your name all over it. Good luck with your CVD issues.

sdcrawls · 03-23-2010, 04:48 PM

I'm sorry, I think I bought the last set last week :(

rottenbelly · 03-23-2010, 06:03 PM

Quote:

Originally Posted by BigBaller

Sorry Brian I have to...

Seriously? A $2000 WK?

Why not an HPI Stadium truck? I know the RS4MT has your name all over it. Good luck with your CVD issues.

I have close to that much wrapped up in my couple of rigs and spare parts.
Too eaches own though. I like my wk because i built alot of the stuff myself.
I only finished 2 spots behind a bigballer at the midwest challenge with mine.

( Was having a bad day and motor issues)

Hey Chong digga. Hit me up around April 8th or so. ( Still at work) I am pretty sure i have a extra set in my Parts bin.

All of us WK runners gotta stick together!

guywithhat · 03-23-2010, 06:09 PM

damn.... i just got my C's, knuckles and CVD's in the mail this morning from RCP.... now I feel bad for taking the last set...lol... but they do work great..

jsj1982 · 03-23-2010, 06:38 PM

sorry i bought the last set. just got here today. I looked pretty hard and i couldnt find them anywhere else. you would think with the crawler king coming out that more demand would be there.

chongdigga · 03-23-2010, 11:45 PM

Quote:

Originally Posted by rottenbelly

I have close to that much wrapped up in my couple of rigs and spare parts.
Too eaches own though. I like my wk because i built alot of the stuff myself.
I only finished 2 spots behind a bigballer at the midwest challenge with mine.

( Was having a bad day and motor issues)

Hey Chong digga. Hit me up around April 8th or so. ( Still at work) I am pretty sure i have a extra set in my Parts bin.

All of us WK runners gotta stick together!

Thanks Rotten and you are right, the WK people do need to stick together. I am sorry for my atitude in my earlier posts. Had a bad day and took it out on RCP. I know its not there fault its really ours. Supply and demand. Brian cleared everything up and I will have my correct parts soon.

Still sucks about the CVD thing tho. lol

03-23-2010, 12:03 PM	#1
chongdigga Quarry Creeper Join Date: Dec 2008 Location: Greensburg PA Posts: 412	No more RCP CVDs!! I went to order a set of CVDs from RCP but they were sold out so I ordered 2 CVD outer axles. I received the wrong parts yesterday and e-mailed them about it and asked if they plan on re stocking the full sets. They returned my e-mail with a snotty ass e-mail saying "They sent me what we had talked about, All the little peices, and if you wanted the outer shaft than its not little" Never $uckin talked to anyone. I ordered part #WK10215 outer axle and they sent me 2 outer axles for a 1/8 buggy with internal threads. No little peices so I dont know what the hell they are talking about. I sent a very sweet response As for the CVDs they have no plans on making anymore. I told them that from a money making business stand point that would be a dumb move. I told them about the steel tranny builds here and that people will need CVDs and that the WK isnt dead yet by far. I'm pretty sure RCP is the only place to get MIP CVDs but if I'm wrong PLEASE tell me. I think we could persuade RCP with a few E-mails. rockpiledriver@rcpcrawlers.com or info@rcpcrawlers.com or maybe some phone calls 909 233 8223

03-23-2010, 12:55 PM	#3
chongdigga Quarry Creeper Join Date: Dec 2008 Location: Greensburg PA Posts: 412	1st email Well my 1st email had my order # and part # at the top. Sorry about my anger towards this but I have $2,000 invested in my WK and I'm just a little pissed that the next time I break a CVD it will be the last time I get to bash my truck.

03-23-2010, 01:51 PM	#8
chongdigga Quarry Creeper Join Date: Dec 2008 Location: Greensburg PA Posts: 412	Sand King I dont know what pics you were looking at but I think my truck is pretty sick. Not saying I would pay 2Gs for it as it stands, but I have bought every part for it. I got this truck brand new bone stock 2 years ago. It is just about as bulletproof as you can make a WK and just about every mod known for it. (keeping the MT look) Even mailed my tranny to Denmark for some custom steel gears and a slipper clutch install.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2010, 12:39 PM	#2
Rockpiledriver I wanna be Dave Join Date: Apr 2004 Location: SoCal Posts: 5,027	Well I had you confused with someone else sorry about that. Here is an exact copy of the "snotty as-email" I sent. I thought I asked and you said it was all the small parts missing? Isn't that what you received? If you were missing an axle part that is not one of the small parts. No we do not plan to make the WK CVD's again after these are gone. To clarify that, I wanted to be sure exactly what was missing before I shipped what I thought was a second request for the same thing. Your reply was what I needed to know in the first place. As for the WK CVD's It will take more than just a few e-mails and or calls to make that happen. Our last lot has lasted almost 3 years. What that means is the minimum order of these is HUGE and EXTREMELY expensive. Sales of these have just not been strong enough to restock currently. I hate it that this is the case, but unless people buy a product, any product, consistently over it's projected sales life, it is hard to expect a company to restock.

03-23-2010, 01:28 PM	#4
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	$2000 Are you kidding?

03-23-2010, 01:38 PM	#6
Scattman Official Cook of the ECC Join Date: Dec 2005 Location: Hawthorne, Florida Posts: 2,653	OK, I guess if you count every part you have ever bought for it. You said $2000 in it so I looked at the pics and thought "Damn, someone stuck it to him"

03-23-2010, 01:50 PM	#7
SnoopMaxx Rock Crawler Join Date: Sep 2007 Location: Denmark Posts: 904	Damn 3 years

03-23-2010, 02:00 PM	#9
SnoopMaxx Rock Crawler Join Date: Sep 2007 Location: Denmark Posts: 904	I bet that was the single scariest thing you have ever done, not knowing if you would ever see that tranny again

03-23-2010, 02:17 PM	#11
SnoopMaxx Rock Crawler Join Date: Sep 2007 Location: Denmark Posts: 904	and the gears are still fine ??

03-23-2010, 02:20 PM	#12
chongdigga Quarry Creeper Join Date: Dec 2008 Location: Greensburg PA Posts: 412	Still look brand new.

03-23-2010, 02:32 PM	#13
SnoopMaxx Rock Crawler Join Date: Sep 2007 Location: Denmark Posts: 904	Jonny you could use a set of LOSI LST cvd's like I did on my BTA axle, and make your axles a little wider at the same time

03-23-2010, 03:48 PM	#15
BigBaller Donkey Punch Champion! Join Date: Oct 2006 Location: Minneapolis Posts: 4,660	Sorry Brian I have to... Seriously? A $2000 WK? Why not an HPI Stadium truck? I know the RS4MT has your name all over it. Good luck with your CVD issues.

03-23-2010, 04:48 PM	#16
sdcrawls Quarry Creeper Join Date: Jul 2008 Location: South Dakota Posts: 222	I'm sorry, I think I bought the last set last week :(

Sponsored Links

03-23-2010, 06:09 PM	#18
guywithhat Pebble Pounder Join Date: Jan 2006 Location: Brockville Posts: 128	damn.... i just got my C's, knuckles and CVD's in the mail this morning from RCP.... now I feel bad for taking the last set...lol... but they do work great..

03-23-2010, 06:38 PM	#19
jsj1982 Rock Stacker Join Date: Jan 2009 Location: Binghamton Posts: 67	sorry i bought the last set. just got here today. I looked pretty hard and i couldnt find them anywhere else. you would think with the crawler king coming out that more demand would be there.

RCCrawler Forums

Thread: No more RCP CVDs!!