Arnel's spare time, spare parts, Wheely king something or other.
 

Picked up a set of wheely king axles to do a build for my nephew, but my bro in law wants to build it for him and is going with an moa setup since he had the axles already and a super rooster esc. And since I picked these up and he doesn't need them, I figure I'll still put them to use, and see if I can drag another family member to the world of scalers. I'm on a single income family with a wife and kid at home so this build was going to be low budget.
Sooooo...... This is where I'm at with parts I purchased and parts I have.


Wheely king axles - classifieds
Pede transmission - classifieds
1.9 axial beadlocks - local
1.9 rc4wd rock crushers - local
Axial jk body - traded
Vaterra 625wp - spare
Duratrax esc - spare
2 Stock wraith shocks - spares
2 traxxas shocks - spares ( might go 90mm all around with spare scx shocks since I'm trading for axial icon's)
stock plastic drive shafts spares
Hitec 72 MHz tx/rx - had ( it was originally for my nephew he didnt need anything fancy lol)

Chassis will be home made.
And links will be homemade as well.
Bumpers and sliders will be home made as well.
As it since right now.

http://i18.photobucket.com/albums/b1...ps4bacebb8.jpg

Re: Arnel's spare time, spare parts, JKing.
 

Looking good! This will make a nice project.

Great idea, I did this for my brother a while back, check out my thread "New life for an old WK" in the WK section for chassis ideas, I did it cheap with some stuff from hardware store.

Sent from the RAZR's edge

Re: Arnel's spare time, spare parts, JKing.
 

I'll be using 1/2" square tubing for the chassis, should be picking up some after work today, I'll just bend it and split it. Undecided on what skid to use since I have a few ax10 skids and an scx10 skid I can use.

Re: Arnel's spare time, spare parts, JKing.
 

well. broke one of the axles making my rear lockouts and took too much off of the axle housing causing it to become a weak point and break once i applied very little pressure. i'll be ordering a new housing for it. wasnt able to pick up any 1/2 tube today. ill get it tomorrow

Re: Arnel's spare time, spare parts, JKing.
 

got some 2.2's coming in the mail that i traded for so im gonna try those on when i get em. also have some axial shocks coming in the mail for it.
http://i18.photobucket.com/albums/b1...ps26527935.jpg


got my lockouts made:
http://i18.photobucket.com/albums/b1...ps62a2f83b.jpg

and have a new axle housing coming. hopefully tomorrow i can get the chassis bent tomorrow.

Re: Arnel's spare time, spare parts, JKing.
 

You are going to like the rig when it's done, when I finished my brother's up I didn't want to give it up, It performed really well, the WK axles have a little wider stance than SCX axles and it was very stable. I'll be watching this"thumbsup"

Re: Arnel's spare time, spare parts, JKing.
 

I like the stance of the axles already, I just think the rock crushers look a little small under the body, so I'm trading for a couple of other sets, a set of 2.2 proline mashers, and a set of twin hammers wheels and tires, I'll see how those look when they get here. When I traded traded for the jk body I didn't get a sticker sheet with it, but think I may have found one for it at no cost.

The soft top I'm going to make will look like this one, I made this one for a friend:
http://i18.photobucket.com/albums/b1...psf74ee6f8.jpg

The 2 sets of wheels and tires I should have later this week:
http://i18.photobucket.com/albums/b1...ps743dda62.jpg
http://i18.photobucket.com/albums/b1...ps887eb687.jpg

Re: Arnel's spare time, spare parts, JKing.
 

Got some paint on it. That's about it for today tho.
http://i18.photobucket.com/albums/b1...ps8004b021.jpg

Re: Arnel's spare time, spare parts, JKing.
 

Had to help my parents paint there house so this is all I got done.

http://i18.photobucket.com/albums/b1...ps2431444c.jpg

Re: Arnel's spare time, spare parts, JKing.
 

this got put on hold since i have carpal tunnel and cant really use my hands right now. i'll update it when things get better!

Re: Arnel's spare time, spare parts, JKing.
 

oh well, I am sure that I want a soft top from u......hahahaha

Re: Arnel's spare time, spare parts, JKing.
 

lol i made that one for mike on the Elite page. I might actually change the body on this rig, the wheely king axles are just a little too wide and dont look right. I have a body in mind. havent done a hard body since my last NB JK, so i thought this might look cool

http://i18.photobucket.com/albums/b1...ps6026f75c.jpg

http://i18.photobucket.com/albums/b1...psafd0a8aa.jpg

Re: Arnel's spare time, spare parts, JKing.
 

This is now the wheely K5 jk body got repurposed to my sons rig

Re: Arnel's spare time, spare parts, JKing.
 

Dunno what this is anymore lol turned into this.....

http://i18.photobucket.com/albums/b1...psf1421b9f.jpg

Re: Arnel's spare time, spare parts, JKing.
 

Re: Arnel's spare time, spare parts, JKing.
 

i was able to get the rear shock hoops, shocks and links mounted in the back, still need to work on the front but waiting for some shock hoops to come in.

http://i18.photobucket.com/albums/b1...psf6820c32.jpg

Looks real good man love the paint


Sent from my SAMSUNG-SM-N900A using Tapatalk

Re: Arnel's spare time, spare parts, JKing.
 

project abondoned lol, chassis and body went to a friend for his build, nephew not showing any interest and would rather play minecraft, but to each their own and ill support him in whatever he wants to do.

Re: Arnel's spare time, spare parts, JKing.
 

I was going to say, I didn't see this in your garage. Did you have to trash the axle housing?