Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > HPI Wheely King
Loading

Notices

Thread: Stock Steering Link replacement

Reply
 
LinkBack Thread Tools Display Modes
Old 05-06-2015, 12:19 PM   #1
Newbie
 
Join Date: Aug 2010
Location: Worcester
Posts: 27
Default Stock Steering Link replacement

Hello Guys,

Looking for some help and a little bit of sage advice and hobby knowledge here...

I need to replace the first steering link from the stock steering setup:



It has a smaller pillow ball (2mm???) than the Traxxas rod ends (3mm) I have on hand. I also have the STRC aluminum center steering link that I just ordered and want to keep the stock steering geometry in place:



I know that the stock rod end from parts tree 85257 fits into the STRC piece:



Question is, are there any rod ends out there that would fit into that STRC piece? I know I could just get that parts tree and I would have the rod ends I'd need, but I don't need the extra parts that come on it.

Last edited by bpare207; 05-07-2015 at 12:50 PM.
bpare207 is offline   Reply With Quote
Sponsored Links
Old 05-07-2015, 11:28 AM   #2
RCC Addict
 
Join Date: Nov 2009
Location: Tulsa
Posts: 1,667
Default Re: Stock Steering Link replacement

i cant see your photos but i assume you are talking about the real small rod end i think its on the bottom of the bell crank on the trans or maybe the top? but eaither way i would just get the parts tree its good to have the extra parts and i cant think of anyone who makes one that small. maybe look at ones for 1/18 scale cars?
adamargue is offline   Reply With Quote
Old 05-07-2015, 12:52 PM   #3
Newbie
 
Join Date: Aug 2010
Location: Worcester
Posts: 27
Default Re: Stock Steering Link replacement

I'm curious, would these work from the losi mini-rock crawler?
bpare207 is offline   Reply With Quote
Old 05-08-2015, 11:36 AM   #4
RCC Addict
 
Join Date: Nov 2009
Location: Tulsa
Posts: 1,667
Default Re: Stock Steering Link replacement

i am not sure what the width is on the balls for them or what it needs to be to fit the bell crank on the wk but you may be able to run them without the ball and just make a bushing out of some plastic tubing that could work too.
adamargue is offline   Reply With Quote
Reply



Stock Steering Link replacement - Similar Threads
Thread Thread Starter Forum Replies Last Post
Titanuim Replacement XR10 Steering Link Blue Monkey RC Chassis and Suspension 0 11-16-2012 12:16 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com