Wheely King Crawler Picture Archive Ok here's the deal guys, if you would like to submit a picture of your truck you can do so here. There are some rules, so allow me to bold these so you read them :lol:
The main thing here is we want to show off your trucks, but we don't want people suffering with long load times to get the pics up. We also don't want rccrawler's bandwidth to go down the toilet. Not everyone is running monitors at 1600x1200, so small pictures are appreciated. Thank you and post away! |
1 Attachment(s) I'll get things started: First up is the OG Wheely King crawler, Ralph.
Build thread: http://www.rccrawler.com/forum/hpi-wheely-king/53677-ralph-ver-2-5-a.html |
Dad's Scorpion King
Build thread: http://www.rccrawler.com/forum/hpi-wheely-king/56702-dads-tuber.html http://www.projecttwin.com/files/dadswk/od/8.jpg |
1 Attachment(s) King Bling
Build thread: http://www.rccrawler.com/forum/showthread.php?t=57656 |
Project "Leroy" build thread here http://www.rccrawler.com/forum/general-crawlers/63052-my-chassis-thats-going-wk.html WK axles Pede Trans MAXX shafts cirrus 704 servo Proline 2.2 Moab's Limited WK Shocks Cassis is my own VERY inspired by a sw2 ;) 55t Lathe Motor WK radio WK ESC http://i15.tinypic.com/348o75j.jpg |
1 Attachment(s) Wheely King Crawler:
|
|
here is my wk crawler novak fifty five crawl motor t-maxx drive shafts revo rods for the 4 link narrowed stock wheels narrowed maxx mashers http://i148.photobucket.com/albums/s...f/DSC00882.jpg http://i148.photobucket.com/albums/s...f/IMGP0838.jpg |
Here is my Wheely King project. It is mostly stock other than stretched with my own custom links, and an Integy 55T motor. I borrowed the 2.2 Swamp Dawgs with RC4WD beadlocks from my F-350 since I was playing with the WK wheels/tires on my F-350 for a bit. I had to make drive shafts out of junk in my garage untill my T-Maxx ones show up, but they seem to be holding up to my suprise!... http://i3.tinypic.com/4c241oh.jpg |
Wheely King Trail Truck Stock WK ESC Stock Tranny Stock 27t motor Stock Servo 2S 20c 1500mah apogee lipo Maxx Drive shafts 2.2 swamp dawgs 2.2 Axial Beadlocks 12.5" WB Build thread: http://www.rccrawler.com/forum/hpi-wheely-king/63213-my-wk-trail-truck.html http://img.photobucket.com/albums/v4...DSCF0009sm.jpg |
THE Wheely King Well after the Boyer Tuber was a crawling failure I tore it a part. Using the WK tranny and axles I made this truck. I hope you all like it. This was a cheap and simple build other than the electronics and motor. http://i160.photobucket.com/albums/t..._DAD/001-3.jpg |
night crawler 4 links drive shafts and 93 spur gear ever thing else is stock http://i37.photobucket.com/albums/e1...4/DSC00876.jpg wk axles locked wk trans revo shafts + 3/4 inch to back 55t motor 96/15 12.5" length 12.5" width :flipoff: |
Stretched Out WK |
Mamba 25 AXI 2808 2100 3 cell LiPo Battery Wheely King Transmission Maxx CVD's in rear axle 645mg servos Narrowed Max Mashers 4 oz airsoft BB's in each tire 13 3/8" WB 10 3/4" track http://homepage.mac.com/lonewolf039/...g/P4130001.JPG |
Wheely King 4x4 wb: 13in motor: stock Gearing: 12/96 gear cover wont fit Tires: stock shown, Moab 2.2's on the way http://i19.photobucket.com/albums/b1...g?t=1176671621 |
* Custom Torsion Chassis * 55t Lathe Motor * Moped ESC * Chicken Butt Servo * Imex All-T Tires * Associated Locking Rims http://img.photobucket.com/albums/v6...ife/Pic263.jpg Build Thread: http://www.rccrawler.com/forum/showt...541#post675541 |
Work In Progress 1 Attachment(s)
http://www.rccrawler.com/forum/hpi-wheely-king/69210-playin-i-go.html |
My Rubi WK2-3L 1 Attachment(s) Usual running gear |
took it out for testing after build. few things will change on it now to this gearing - 14/93 stretched to 12.5" wheelbase 60/40 links with hpi ball ends/440 thread HPI WK aluminum shocks holmes revolver 2 pheonix 25 esc 2-cell 2100 li-po battery moab 2000 tires on narrowed hpi rims http://i170.photobucket.com/albums/u...ril2007025.jpg |
WK Comp Crawler Here is a shot of my (untested) competition WK crawler. I'll post pics in another thread after I know if it works or not. BMV - inspired chassis design Stampede tranny (will be replaced with a XXX-T next week) Super Rooster ESC Airtronics 94358 Servo Integy 55T Airtronics M-8 M2K's on single narrowed Stampede wheels **EDIT** More pics can be found here: http://www.rccrawler.com/forum/hpi-wheely-king/70404-torsion-wk-comp-crawler.html http://warcrc.org/Pictures/build/wk_2.JPG |
All times are GMT -6. The time now is 06:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com