Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Heritage Crawlers > HPI Wheely King
Loading

Notices

Thread: Wheely King Crawler Picture Archive

Reply
 
LinkBack Thread Tools Display Modes
Old 03-11-2007, 08:52 PM   #1
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Arrow Wheely King Crawler Picture Archive

Ok here's the deal guys, if you would like to submit a picture of your truck you can do so here. There are some rules, so allow me to bold these so you read them

  • Pictures must not be any larger than 800x600
  • You may only submit ONE picture of your truck
  • Your truck must be complete, no poser shots of your truck without driveshafts, or shocks, or the chassis sitting on a spray can
  • You may link to a thread about your truck and you may link to a site containing more pictures
  • Do NOT list out addresses to individual pictures
  • If you would like to change your truck's picture, please edit your post accordingly
  • Please post a build thread for your rig. This will reduce chit-chat in this thread and give folks a reference point for info on your rig.
  • Anyone not following these rules will have the rules enforced onto their post as the mods see fit, ie: removing excess pictures, deleting multiple links, deleting of the entire post if too many rules are being broken for us to simply edit the post


The main thing here is we want to show off your trucks, but we don't want people suffering with long load times to get the pics up. We also don't want rccrawler's bandwidth to go down the toilet. Not everyone is running monitors at 1600x1200, so small pictures are appreciated.

Thank you and post away!

Last edited by JasonInAugusta; 03-12-2007 at 10:04 AM.
JasonInAugusta is offline   Reply With Quote
Sponsored Links
Old 03-11-2007, 08:59 PM   #2
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Default

I'll get things started:

First up is the OG Wheely King crawler, Ralph.
  • Novak Crawler System
  • TXT Transmission
  • Revo Driveshafts
  • Airtronics 94359Z servo
  • Rear RPM Revolvers
  • Imex 2.2 All-Terrains
  • Rock rings by 62pyro
  • 1/4" 4130 chromoly frame by rckjeep
  • Hood from HPI Rubicon, .030" side panels

Build thread: Ralph Ver 2.5
Attached Images
 

Last edited by JasonInAugusta; 03-11-2007 at 09:08 PM.
JasonInAugusta is offline   Reply With Quote
Old 03-11-2007, 09:04 PM   #3
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Default

Dad's Scorpion King
  • Mamba 25
  • Park 450
  • Wheely Kng Transmission
  • Revo Driveshafts
  • JR 8611A servo
  • Front RPM Revolvers
  • Imex 2.2 All-Terrains
  • Rock rings by Montana Scale Designs
  • 3/16" steel frame
  • Aluminum seat, interior tub, and body panels

Build thread: Dad's Tuber


Last edited by JasonInAugusta; 03-11-2007 at 09:07 PM.
JasonInAugusta is offline   Reply With Quote
Old 03-11-2007, 09:16 PM   #4
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Default

King Bling
  • Mamba 25
  • Revolver 2
  • Stampede Transmission (87/14)
  • Stampede Driveshafts
  • Rear RPM Revolvers (double narrowed)
  • Pro-Line 2.2 Moabs
  • XRC Rock Rings
  • Front Dig
  • 3/16" brake tubing frame by King Bling
  • Lexan panels

Build thread: http://www.rccrawler.com/forum/showthread.php?t=57656
Attached Images
 
JasonInAugusta is offline   Reply With Quote
Old 03-11-2007, 10:05 PM   #5
Pebble Pounder
 
Join Date: Jan 2007
Location: So.Cal
Posts: 138
Default

Project "Leroy"

build thread here
My Chassis thats going in the WK!

WK axles
Pede Trans
MAXX shafts
cirrus 704 servo
Proline 2.2 Moab's
Limited WK Shocks
Cassis is my own VERY inspired by a sw2 ;)
55t Lathe Motor
WK radio
WK ESC




Kingofthehill is offline   Reply With Quote
Old 03-19-2007, 06:02 PM   #6
Newbie
 
Join Date: Feb 2006
Location: Reno/Sparks
Posts: 28
Default

Wheely King Crawler:
  • Super Rooster and 75T Lathe
  • Wheely King Transmission
  • Jato Driveshafts
  • HiTec 645MG servo
  • Stock Wheely King wheels: narrowed and painted
  • 2.2 Moabs
  • Created from the extra parts of 9 different R/C cars
Build thread: HPI Wheely King Build
Attached Images
 
whip is offline   Reply With Quote
Old 03-19-2007, 06:57 PM   #7
Pebble Pounder
 
Join Date: Dec 2006
Location: Guam
Posts: 127
Default

Diaz Prototype WK F-650


Last edited by TankFarmer; 07-08-2007 at 01:07 AM.
TankFarmer is offline   Reply With Quote
Old 03-21-2007, 09:45 PM   #8
Rock Stacker
 
Join Date: Jan 2007
Location: red deer
Posts: 81
Default

here is my wk crawler
novak fifty five crawl motor
t-maxx drive shafts
revo rods for the 4 link
narrowed stock wheels
narrowed maxx mashers





Last edited by lockeddiff; 01-06-2008 at 11:59 AM.
lockeddiff is offline   Reply With Quote
Old 03-27-2007, 02:55 AM   #9
Rock Stacker
 
Join Date: Mar 2007
Location: Redmond
Posts: 56
Default

Here is my Wheely King project. It is mostly stock other than stretched with my own custom links, and an Integy 55T motor. I borrowed the 2.2 Swamp Dawgs with RC4WD beadlocks from my F-350 since I was playing with the WK wheels/tires on my F-350 for a bit. I had to make drive shafts out of junk in my garage untill my T-Maxx ones show up, but they seem to be holding up to my suprise!...

patatron is offline   Reply With Quote
Old 03-28-2007, 07:36 AM   #10
RCC Addict
 
Join Date: Aug 2005
Location: Akron
Posts: 1,784
Default

Wheely King Trail Truck

Stock WK ESC
Stock Tranny
Stock 27t motor
Stock Servo
2S 20c 1500mah apogee lipo
Maxx Drive shafts
2.2 swamp dawgs
2.2 Axial Beadlocks
12.5" WB

Build thread: My WK Trail truck

NickRummy is offline   Reply With Quote
Old 04-01-2007, 12:31 AM   #11
Rock Crawler
 
JIA's Dad's Avatar
 
Join Date: Jan 2007
Location: Midway
Posts: 836
Default THE Wheely King

Well after the Boyer Tuber was a crawling failure I tore it a part. Using the WK tranny and axles I made this truck. I hope you all like it. This was a cheap and simple build other than the electronics and motor.
JIA's Dad is offline   Reply With Quote
Old 04-02-2007, 01:48 PM   #12
Pebble Pounder
 
Join Date: Mar 2007
Location: reno
Posts: 164
Default night crawler 4 links drive shafts and 93 spur gear ever thing else is stock


wk axles locked
wk trans
revo shafts + 3/4 inch to back
55t motor 96/15
12.5" length
12.5" width

Last edited by upoveryou; 05-08-2007 at 04:43 PM. Reason: whats done to my truck
upoveryou is offline   Reply With Quote
Old 04-07-2007, 11:40 PM   #13
Newbie
 
Join Date: Dec 2006
Location: Canaseraga
Posts: 36
Default Stretched Out WK

DIRT HAWG is offline   Reply With Quote
Old 04-14-2007, 10:55 PM   #14
Rock Stacker
 
Join Date: Feb 2007
Location: Whitecourt
Posts: 89
Default

Mamba 25
AXI 2808
2100 3 cell LiPo Battery
Wheely King Transmission
Maxx CVD's in rear axle
645mg servos
Narrowed Max Mashers
4 oz airsoft BB's in each tire
13 3/8" WB
10 3/4" track

lonewolf039 is offline   Reply With Quote
Old 04-15-2007, 03:09 PM   #15
Rock Stacker
 
Join Date: Nov 2005
Location: La Porte
Posts: 56
Default

Wheely King 4x4

wb: 13in
motor: stock
Gearing: 12/96 gear cover wont fit
Tires: stock shown, Moab 2.2's on the way

lowblueranger is offline   Reply With Quote
Old 04-18-2007, 03:05 AM   #16
Pebble Pounder
 
Join Date: Jan 2007
Location: Clovis
Posts: 158
Default

* Custom Torsion Chassis
* 55t Lathe Motor
* Moped ESC
* Chicken Butt Servo
* Imex All-T Tires
* Associated Locking Rims



Build Thread:
http://www.rccrawler.com/forum/showt...541#post675541
pbfrk4life is offline   Reply With Quote
Old 04-21-2007, 12:59 AM   #17
Quarry Creeper
 
Join Date: Apr 2007
Location: Harrisville, UT
Posts: 321
Default Work In Progress

  • hpi 96t spur
  • custom lower shock mounts and moved top mounts
  • steel steering links
  • Stretched to about 13.5" with traxxas links and TLT top mounts
  • JR 126MG servo on a custom mount
  • EMAXX drivelines
  • Tekin Rebel ESC
  • integy 55 turn
  • The rest is stock
To see more visit my thread
Playin As I Go
Attached Images
 

Last edited by screaminsavage; 04-22-2007 at 06:13 PM.
screaminsavage is offline   Reply With Quote
Old 04-22-2007, 03:17 PM   #18
I wanna be Dave
 
Join Date: Jun 2006
Location: Here
Posts: 2,283
Default My Rubi WK2-3L

Usual running gear
Attached Images
 
Gula is offline   Reply With Quote
Old 04-23-2007, 11:27 PM   #19
Newbie
 
Join Date: Mar 2007
Location: Las Vegas
Posts: 1
Default

took it out for testing after build. few things will change on it now to this

gearing - 14/93
stretched to 12.5" wheelbase
60/40 links with hpi ball ends/440 thread
HPI WK aluminum shocks
holmes revolver 2
pheonix 25 esc
2-cell 2100 li-po battery
moab 2000 tires on narrowed hpi rims



Last edited by JasonInAugusta; 05-11-2007 at 10:58 PM.
Agurak is offline   Reply With Quote
Old 04-28-2007, 12:07 AM   #20
Rock Crawler
 
Join Date: Mar 2006
Location: Auburn, WA
Posts: 983
Default WK Comp Crawler

Here is a shot of my (untested) competition WK crawler.
I'll post pics in another thread after I know if it works or not.

BMV - inspired chassis design
Stampede tranny (will be replaced with a XXX-T next week)
Super Rooster ESC
Airtronics 94358 Servo
Integy 55T
Airtronics M-8
M2K's on single narrowed Stampede wheels

**EDIT** More pics can be found here: Torsion WK Comp Crawler


Last edited by todd1803; 05-01-2007 at 06:12 PM.
todd1803 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com