RCCrawler Forums - how to lock diff on a wk

RCCrawler Forums (http://www.rccrawler.com/forum/)

- HPI Wheely King (http://www.rccrawler.com/forum/hpi-wheely-king/)

- - how to lock diff on a wk (http://www.rccrawler.com/forum/hpi-wheely-king/65999-how-lock-diff-wk.html)

upoveryou

03-26-2007 11:59 PM

how to lock diff on a wk

dose anyone know how to lock the diff on a wk

Gula	03-27-2007 12:36 AM

Quote:

Originally Posted by upoveryou (Post 646966)

dose anyone know how to lock the diff on a wk

You can take the diff appart and use hot glue to lock it. Make sure you leave the axles in the bigger spider gears while you do that. Or use epoxy and put a piece of tape over the holes in the bigger spider gear

chip cross

03-27-2007 03:03 AM

used '' quick steel '' in mine it works great just take the diff apart clean the grease out make little balls the size of a #2 pencil eraser place balls between the spider gears mash down quick steel between the spider gears till its in there good then you got wk diff locked

Cslax06

03-27-2007 03:12 PM

Do you really need two threads?

But anyways, I would start out by packing it with clay. I did this and has worked great.

Natedog

03-27-2007 03:29 PM

Disassemble the diff, clean ALL grease out, fill with JB Weld. As said make sure you keep it out of the axle splines in the side gears.

I like pie

04-13-2007 02:45 PM

anyone got any pic on how to do this?

All times are GMT -6. The time now is 05:22 PM.