Go Back   RCCrawler Forums > Regional > West > Idaho
Loading

Notices

Thread: Stick Chassis Legal?

Reply
 
LinkBack Thread Tools Display Modes
Old 05-13-2010, 10:21 PM   #1
Newbie
 
Join Date: Sep 2008
Location: Boise
Posts: 30
Default Stick Chassis Legal?

I was informed that stick chassis are NOT legal. I can't find any documentation in the offical rules of this. Can someone post a link proving that the stick is in fact illegal? Just wondering if I need to start over. Thanks.
Jeff Mills is offline   Reply With Quote
Sponsored Links
Old 05-14-2010, 05:41 PM   #2
Newbie
 
Join Date: May 2008
Location: NAMPA
Posts: 18
Default

I went through the 2010 USRCCA rules and all I found on chassis requirements is this. SECTION 2: VEHICLE REQUIREMENTS

2.1.3 - Bodied vehicles: Any support Chassis allowed.

So I would say you are fine to run your stick.
JUSTCUZ is offline   Reply With Quote
Old 05-14-2010, 05:58 PM   #3
RCC Addict
 
Join Date: Apr 2006
Location: Brighton
Posts: 1,015
Default

Quote:
Originally Posted by Jeff Mills View Post
I was informed that stick chassis are NOT legal. I can't find any documentation in the offical rules of this. Can someone post a link proving that the stick is in fact illegal? Just wondering if I need to start over. Thanks.
What class are you running? Super has a minimum wheelbase of 16" and a maximum of 18". Stick chassis will need to run a LEGAL body:

http://www.usrcca.com/rules/2010_USRCCA_Rules.pdf

2.2 - Class 1 - Super Crawler Class:
o
2.2.1 - Vehicle wheelbase is limited to a minimum of 16 inches and a maximum of 18 inches.

o
2.2.2 - No limits to steering configuration.

o
2.2.3 - Bodied vehicles must be 3” minimum height on sides. No less than 12.5” total length and full original
width, and no less than 5” in center.

o
2.2.4 - Super class bodiless 12" overall length, 3" overall width, and 3.75" overall height.

o
2.2.5 -Vehicle is limited to a minimum 3.2 inch wheels/rims or larger at the bead surface. Wheels may be
modified provided that the tire bead surface is not less than 3.2 inches in diameter. Tires may be modified from

other sized tires using only a pliable rubber.

I hope that information helps.
DeaDShorT is offline   Reply With Quote
Old 05-14-2010, 06:00 PM   #4
Newbie
 
Join Date: May 2008
Location: NAMPA
Posts: 18
Default

Sorry! Missed the most important part. 2.2 PRO
JUSTCUZ is offline   Reply With Quote
Old 05-14-2010, 06:09 PM   #5
RCC Addict
 
Join Date: Apr 2006
Location: Brighton
Posts: 1,015
Default

You'll need a body and wheelbase/trackwidth that measures to the following specs :

2.3 - Class 2 – Class 2.2
:

o
2.3.1 - Vehicle wheelbase is limited to a maximum of 12.5 inches.

o
2.3.2 - Vehicle track width is limited to a maximum of 12.5 inches. This is determined by measuring
the bottom of the outer most edge of the front and rear tires while the vehicle is sitting on level ground.

o
2.3.3 - Vehicle is limited to 2.2 inch wheels/rims or smaller at the bead surface. Wheels may be modified provided
that the tire bead surface does not exceed 2.2 inches in diameter. With a tire mounted no exterior component of the
wheel including but not limited to the bead lock ring shall exceed 2.55". Tires may be modified from other sized tires
using only a pliable rubber but must not exceed a total uncompressed outer diameter of 6 inches.

o
2.3.4 - Vehicles are limited to 2-wheel steering only.

o
2.3.5 - 2.2 Crawler class bodiless 8" overall length, 3" overall width, and 3.75" overall height.

o
2.1.6 - Bodied vehicles must be 3” minimum height on sides. No less than 12.5”

total length and full original width, and no less than 5” in center.
DeaDShorT is offline   Reply With Quote
Old 05-14-2010, 06:17 PM   #6
666
MODERHATER™
 
666's Avatar
 
Join Date: Nov 2005
Location: Colorado
Posts: 10,939
Default

Must be a local thing. It does not say anywhere in USRCCA rules you can not run a stick chassis. Who told you can't? Have you or them ever read the rules?
666 is offline   Reply With Quote
Old 05-14-2010, 07:35 PM   #7
Newbie
 
Join Date: Sep 2008
Location: Boise
Posts: 30
Default

Yeah I've read the rules many times and was very confused when I was informed that I was running an illegal chassis.??? Been running it locally for almost 2 years, guess I will "stick" with it then.

Thanks for the input guys.
Jeff Mills is offline   Reply With Quote
Old 05-14-2010, 08:48 PM   #8
RCC Addict
 
Join Date: Apr 2006
Location: Brighton
Posts: 1,015
Default

Quote:
Originally Posted by Jeff Mills View Post
I was informed that stick chassis are NOT legal. I can't find any documentation in the offical rules of this. Can someone post a link proving that the stick is in fact illegal? Just wondering if I need to start over. Thanks.
Quote:
Originally Posted by 666 View Post
Must be a local thing. It does not say anywhere in USRCCA rules you can not run a stick chassis. Who told you can't? Have you or them ever read the rules?
Quote:
Originally Posted by Jeff Mills View Post
Yeah I've read the rules many times and was very confused when I was informed that I was running an illegal chassis.??? Been running it locally for almost 2 years, guess I will "stick" with it then.

Thanks for the input guys.
Most likely someone not aware of the rules, or they are afraid of competing against something a little outside the norm. I say go STICK it to them in the comps
DeaDShorT is offline   Reply With Quote
Old 05-15-2010, 06:40 AM   #9
Rock Stacker
 
Join Date: Mar 2010
Location: Meridian
Posts: 68
Default

Looks like you have your answer already Jeff, but I seen this.....

Quote:
Originally Posted by xirtic View Post
There is NO rule against stick chassis. The newest rule for 2010 states that the truck WB can not exceed 12.5" thru the entire suspension travel cycle. In the past, the WB had to be at 12.5" when the truck was at rest on its suspension. That allowed for trucks to "stretch" to almost 13" WB in some cases....thus exceeding the 12.5" of allowed WB. Since stick chassis cannot "stretch", as long as the WB is at or under 12.5", they are definitely legal. ALSO, the body on that chassis must also conform to the standard body dimensions outlined in the USRCRC 2010 rules. (12.5" long, 5" wide, and 3" tall....or greater in dimensions)...bodiless design does not apply to this class of chassis.

Some clubs may complain that the Stick Chassis can be an unfair advantage due to it's huge ground clearance, but this design also has it's problems in that the suspension travel is often LESS than a traditional TVP design, and unless you get the stick mounted as close to the motors as possible, there is a noticeable ammount of axle swing. The club that I crawl with here has 7 or 8 Stick Chassis based trucks at this time.

I have been in conversation with some of the organizers of the upcoming Battlegrounds 2 and Rox Around the Clox events, and nothing has been said about this chassis being disqualified. I did not directly ask that question, but I sent this design to one of them (he is also the machinist for some of my FOR SALE parts) and he saw no issues with it. At this time, I would have to say that the Stick Chassis is definitely still legal.
208BrAnDo is offline   Reply With Quote
Old 05-15-2010, 07:55 AM   #10
Newbie
 
Join Date: Dec 2009
Location: Boise
Posts: 43
Default

Alright Jeff, I will let you off the hook
Duckdogs14 is offline   Reply With Quote
Old 05-16-2010, 12:38 PM   #11
Rock Stacker
 
Join Date: Mar 2010
Location: meridian
Posts: 71
Default

He was just trying to get your panties all ruffled up!
ba450crf is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com