June 11 2011... Central Il biggest event
 

June 11 2011

10am start

13063 N 250 E rd
Fairmount IL 60446

In the event of Rain or Flooding the event will be pushed to (Ill post that later)
There will be a 4 event Top Truck Challange for 2.2 and 1.9 trucks.

After the TTC we will be holding the KoF race... this year it will be about 4x's as long. There will be huge hill climbs, long open area's and any other thing I can think to include. We will use the same rules as last year (2.2 and smaller, at least 1 solid axle etc)

$5 per class entry... winner of each class gets 100% of the proceeds from that class.

When will the rules be finished on all classes. I might try to take this event on.

I got a few rigs that might fit.

thanks

what rules are you looking for? Were running the same rules as last yr for the KoF race and 2.2 class rules for the TTC are done with the exception of a weight.

1.9 rules were proposed on the scrc site but noone agreed so I think we will run the "trail" rules we ran last year with the exception of no bonus points and no penalty for winching.

Of course, since this is my personal event... I could make up my own rules...(insert evil laugh here)

I never saw these KOH rules last year. Is there a link to them.

Also I saw you wrote 7.5lb max for TTC. I think that is kinda light. But your rules.

I hope to see them finalist soon.

Where is Fairmount?where do I find the ttc rules"thumbsup"

I did a mapquest it's about three hours away.

thats aways down there:shock:

if you saw the talk about 7.5# then you know where the rules are but...
http://scrcrawlers.com/smf/index.php?topic=224.0 I think they are basically on page 3.

we didnt have TTC rules last yr, just KoF rules... Ill look them up and post them for everyone. Expect it to be about 10min a lap and I havent decided how many laps :mrgreen:.

The farm is a drive but its usually a blast. Ive been having comps out there since '05. There camping available onsite and a bon fire for anyone that stays the night (I tend to make BIG bon fires).

just looking at the TTC ruels and scoring for Colorado would ours be the same?

KoF rules:

Timed event, lowest time wins
2.2 and scale trucks only
must have at least 1 solid axle

Rollovers = 10 sec
Gate = 30 sec

multiple trucks may be on the course at any time

course may/will include:
Rocks
Grass
Sand
Mud
shallow water
hills
logs

scoring is addressed in the rules that I posted a link to

Thanks Jeff I saw the TTC rules just no KOH.

I only ask one question gate width?

depends how evil I am feeling that day... Honestly though, we may make it checkpoints and get rid of the penalty for hitting a gate.

Saw thr TTC ruels in the club site"thumbsup"Should be a great event got plenty of time for practice and tunning.

I just want to put this out there... this event is not associated with any club or organization and EVERYONE is welcome rather you come from Wi/In/Mo or China your welcome to come and have a good time.

Im hoping to spend the week before the evnt down at the "Farm" prepping.

Well I guess that answers my question.

I'll be there some how.

I'm ready this year. I've got some "new stuff" on my rig. (like you said "insert evil laugh here")

Can't wait.

the events at the farm were going well before SCRC started and will keep going. Its the core of what crawling is, a bunch of guys having a good time.

i will be there now that i have a ttc truck with no were to go.

TTC rules
“2.2” TTC Class rules:

Wheel Base:
min 10”
max 14”
(as measured from wheel nut to wheel nut) Vehicle must complete the entire competition with the same wb.

Wheels: 2.2” or smaller
Wheels may be changed during the event (see tire rule)

Tires:
Max height: 6”
Max Width: 4”
Vehicle must compete in the entire competition with the same type (make/model) of tire. Tires may only be changed if they become damaged


Width:
Max: 12” (as measured from the outside of each tire)

Body:
Must resemble a 1:1 vehicle that has been built or could be built. Body may be constructed of lexan, abs, tube work or a combination. Body must start out as a 1:10 or larger body. “mini” or “comp” bodies are not allowed. Body may be altered by dovetailing, sectioning or chopping as long as it is within the min dimensions.
Must have:
Hood
2 side panels (1 on each side)
Min Dimensions:
Width: 5”
Length: 9”
Height: 3.5”

Frame/chassis:
Must resemble that of a 1:1 vehicle
“TVP” style chassis are not allowed
May be constructed of tube work, frame rails or a combination.

Hitch attachment:
Vehicle must have a securely mounted hitching device. This may be a small chain around the axle or an actual hitching point. Must be able to connect a 3/16” hook.
Max height above ground (as measured to the center line of the hitching point) must be no more than 4”. Hitch must be capable of holding at least 20# of live load.



Drive train:
Power must be transmitted to the axles via drive shafts

Battery:
No limits

Motor:
No limits

Dig/Rear steer:
You are allowed to use either dig or rear steer. You may not use both. Which ever you choose will be used thru the entire event.

All rulings made regarding vehicle eligibility are final (no protests). If your vehicle is out of spec, you will be given 1 attempt to bring it within spec. If you fail to bring your vehicle within spec you will not be allowed to participate.

“1.9” TTC Class rules

Wheel Base:
min 8”
max 12.5”
(as measured from wheel nut to wheel nut) Vehicle must complete the entire competition with the same wb.

Wheels: 1.9” or smaller
Wheels may be changed during the event (see tire rule)

Tires:
Max height: 4.5”
Max Width: 3”
Vehicle must compete in the entire competition with the same type (make/model) of tire. Tires may only be changed if they become damaged


Width:
Max: 10” (as measured from the outside of each tire)

Body:
Must resemble a 1:1 vehicle that has been built or could be built. Body may be constructed of lexan, abs, tube work or a combination. Body must start out as a 1:10 or larger body. Body may be altered by dovetailing, sectioning or chopping as long as it is within the min dimensions.
Must have:
Hood
2 side panels (1 on each side)
Min Dimensions:
Width: 5”
Length: 9”
Height: 3.5”

Frame/chassis:
Must resemble that of a 1:1 vehicle
“TVP” style chassis are not allowed
May be constructed of tube work, frame rails or a combination.

Hitch attachment:
Vehicle must have a securely mounted hitching device. This may be a small chain around the axle or an actual hitching point. Must be able to connect a 3/16” hook.
Max height above ground (as measured to the center line of the hitching point) must be no more than 4”. Hitch must be capable of holding at least 20# of live load.



Drive train:
Power must be transmitted to the axles via drive shafts

Battery:
No limits

Motor:
No limits

Dig/Rear steer:
Not allowed in this class


All rulings made regarding vehicle eligibility are final (no protests). If your vehicle is out of spec, you will be given 1 attempt to bring it within spec. If you fail to bring your vehicle within spec you will not be allowed to participate.




TTC course/ event layout:


Events:
Truck pull
Mini Rubicon
Obstacle course
Tank Trap
Hill Climb


Truck Pull:
Time/Distance
Competitors will pull a designated vehicle/weight up a set incline.
Places will be determined first by full pull times and then by distance (if a vehicle does not make a full pull).

Mini Rubicon:
Time/Distance
Course will be constructed of large rocks/boulders/inclines.
Vehicles will progress thru the designated course until which time as they either go out of bounds or cannot make farther forward progress. Positions will be determined first by times of full runs and then by distance covered

Obstacle course:
Time/Distance
Course will be constructed of rocks/water holes/logs etc.
Vehicles will progress thru the designated course until which time as they either go out of bounds or cannot make farther forward progress. Positions will be determined first by times of full runs and then by distance covered.

Tank Trap:
Time/Distance
Course will be constructed so that it progresses up a grade. The course will include deep mud holes/ruts/steep inclines.
A set time will be given before the start of the event, each competitor has until the end of that time to complete the obstacle.
Vehicles will progress thru the designated course until which time as they either go out of bounds, cannot make farther forward progress or are out of time. Positions will be determined first by times of full runs and then by distance covered.

Hill Climb:
Time/Distance
Course will be constructed so that it continually progresses up a steep grade. The course will include multiple “gates” which the competitor must complete (all 4 wheels must go thru the gate). The course will include very steep dirt climbs and off camber sections.
Vehicles will progress thru the designated course until which time as they either go out of bounds or cannot make farther forward progress. Positions will be determined first by times of full runs and then by distance covered.


Scoring:
First place in each event will receive 1 point. Each following competitor will receive 1 additional point (2nd place 2 pts, 3rd place 3 pts etc.) Ties will receive the higher of the equal score.


NO REVO'S MAXX'S or other monster trucks. This is intended to be a scale event.