04-20-2012, 09:50 PM | #4441 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
Hera is together. The bec harness and bypass adapters are all hooked up and the servos work great. Now I just need to instal the pan hard and she's ready to run... aside from a few details. I'm thinking of going CMS on the rear too. |
Sponsored Links | |
04-20-2012, 10:05 PM | #4442 |
RCC Addict Join Date: May 2010 Location: The heart of the south
Posts: 1,138
| Re: NIRC. Chit Chat
Looks good Johnny.
|
04-20-2012, 10:13 PM | #4443 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
Thanks Neil, I tried to make it as small as I could... I am going to switch everything to Deans once I get my new iron. I can't believe how much easier they are to solder than Traxxas plugs, even the action of plugging in and unplugging is so much easier! And, they're a third of the size! |
04-21-2012, 07:16 AM | #4444 |
Rock Crawler Join Date: Oct 2008 Location: Somewhere near the lake in IL
Posts: 975
| Re: NIRC. Chit Chat
Johnny it looks great!
|
04-21-2012, 12:09 PM | #4445 |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| whhyyy do i spy twist connectors...
|
04-21-2012, 12:53 PM | #4446 |
RCC Addict Join Date: May 2010 Location: Midwest
Posts: 1,917
| Re: NIRC. Chit Chat
Haha.. Johnny!!! Why!!
|
04-21-2012, 01:23 PM | #4447 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
HA! Only to prevent the giant ball of metal from tearing through the electrical tape! DL, jump in the car and come party! |
04-21-2012, 01:26 PM | #4448 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
I've got $80 worth of wings coming! |
04-21-2012, 01:44 PM | #4449 |
Rock Crawler Join Date: Nov 2011 Location: Sin City
Posts: 820
| Re: NIRC. Chit Chat
Will there be any of these coming? |
04-21-2012, 01:59 PM | #4450 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
We have a staircase hehehe, you're 8 years to late! There will be a few single women but not like in the old days... I used to only invite women, the guys show up no matter what! I did invite a superhottieboombody from work, she's a fan of the micro skirt and I'm a fan of her in one... she said she was coming. We'll see. |
04-22-2012, 09:40 AM | #4451 | |
Rock Crawler Join Date: Dec 2009 Location: Chicago
Posts: 539
| Re: NIRC. Chit Chat Quote:
| |
04-22-2012, 01:04 PM | #4452 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat |
04-22-2012, 01:27 PM | #4453 |
RCC Addict Join Date: May 2010 Location: The heart of the south
Posts: 1,138
| Re: NIRC. Chit Chat
I spent a day making sliders for my TF2 and got so frustrated that I ended up throwing one across the room. Not being able to mount to a flat bar like a honcho and straight out to the sliders made brazing a real bitch. I needed 6 hands. SO, I tossed all the work I had done and started over with solid stock and welded it all. Got the sliders made and need to start on the mounts. |
04-22-2012, 01:49 PM | #4454 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: NIRC. Chit Chat
I need to install Hera's front pan hard bar and finish Melons' 4th tire... and that's about it, aside from Hera's rats nest of wiring!
|
04-22-2012, 03:06 PM | #4455 |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
|
trying to get ambition to dig into the pink wraith's elecs and add a winch... its just not happening. ;) tf2 is far from done but coming along nicely. too many projects. |
04-22-2012, 05:15 PM | #4456 |
RCC Addict Join Date: May 2010 Location: The heart of the south
Posts: 1,138
| Re: NIRC. Chit Chat
So Jason, you got the GT3B all figured out now? Mine shipped today. I got a couple 3 channel RXs and a couple 6 channel RXs and I know that I am going to need some help.
|
04-22-2012, 05:32 PM | #4457 | |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| Quote:
i need to update the firmware and i have no idea about it. gotta boot up the pc and see if i can figure it out. i can notice a drop in either response or resolution compared to the spektrum or futaba but its fine for a cheap radio with momentary switches. ;) | |
04-23-2012, 08:39 AM | #4458 |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| Re: NIRC. Chit Chat
well my old pc died... just makes a click sound when i try to boot it up... grrr. if anybody has an older laptop with newish windows software i might be interested. got the wraith all re-wired up good enough for this weekend. all i can say is the 3racing winches SUCK... i sure hope if i have to winch its nothing serious, i'll use a snatch strap but then it will slow down the already snail slow winch speed... i did however, find a killer, super duper homebrew yet clean way to mount a 3racing winch to a wraith. and.... over the weekend i happened to stumble on something i couldnt pass up. http://www.rccrawler.com/forum/sale/...ller-sold.html the price was a steal just for the parts, but it looks like it might be a pretty decently built rig. |
04-23-2012, 09:22 AM | #4459 |
RCC Addict Join Date: May 2010 Location: The heart of the south
Posts: 1,138
| Re: NIRC. Chit Chat
I just got my 3Racing winch in my Wraith. I used the MG200 bumper and really like it. I also added this and really like how it keeps the front end clear. http://www.crawlerinnovations.com/in...mart&Itemid=82 |
04-23-2012, 10:03 AM | #4460 | |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| Re: NIRC. Chit Chat Quote:
i'll take a pic of my winch 'mount' when i get home tonight. no mods to the chassis, just the 3racing winch mount. remarkably easy... maybe too easy. | |
Tags |
baby mama drama, ban the mouth!, disappearing ta, disappearing tag show, fattittybrits, kidsthesedays, ls1 everything, rc hippies, tittie artist, winter is lame |
| |