RCCrawler Forums

MacJamez · 10-23-2011, 09:18 PM

Quote:

Originally Posted by crazyrccrawler

O nice! haha. I looked pretty rough in the for sale ad. But I bet you will make it nice.

It for sure was rough. Just seemed to have been around the block a few times to many. But I'm gonna bring it back to life and a little more up to date.

FlightInstrukta · 11-04-2011, 09:29 PM

new whip stuntin...

Hydro-Tank · 11-04-2011, 09:38 PM

What, only two shots of that beast? haha. Looks cool bud. Wish I had mine going.

lil wasted · 11-10-2011, 02:57 AM

would love to crawl with u guys but i am just now starting on my first scaler, and im not that far into it

this is all i have right now

going to make a tuber and put some of the spray on bedliner all over the cab with a full interior. hoping to use t-rex 60 axles, RC4WD Disruptor Ultra Compact Planetary , and a RC4WD Killer Transfer Case, and headlight and taillights, anybody got any good ideas for me let me know thanks for reading.

Docwolf · 11-10-2011, 04:46 PM

what is this body from???

lil wasted · 11-10-2011, 05:43 PM

Its a newbright,its actualy a 1/12 scale

Docwolf · 11-10-2011, 07:42 PM

you could proly go with a 1/18 crawler for a good scaler look, check out a post in the red cat rs10 forum for a threaded called beaver bus, should give you some good ideas.

lil wasted · 11-10-2011, 09:11 PM

Thanks for the tip I forgot about the maxstone 16 rock crawler, i thnk i might go in that direction. Thanks again

lil wasted · 11-12-2011, 12:46 AM

Is there any hobbie shops in salina except dons

S-towncrawler · 11-12-2011, 10:21 AM

nope just the place in minnicrapolis at the mower shop they got a few odds and ends mostly traxxas stuff. they're into short course circle track racing over threre

Docwolf · 11-12-2011, 12:38 PM

yeah i went into dons looking for crawler stuff and the old lady looked at me like i was certified insane. she had never herd of any such thing.

lil wasted · 11-12-2011, 04:00 PM

Ya same way for me, thanks for the info

lowboy · 11-13-2011, 03:56 PM

I'm just south of Lindsborg a couple miles. Just getting back into RC's after many years off. Just ordered a Wraith that should be here this week and my 2 boys 13 & 15 are each getting an AX10 for christmas so they will be modding them I;m sure. Mostly going to be crawling around the farm and Coronado Heights and Kanopolis lake.

FlightInstrukta · 11-15-2011, 11:32 AM

Quote:

Originally Posted by lowboy

I'm just south of Lindsborg a couple miles. Just getting back into RC's after many years off. Just ordered a Wraith that should be here this week and my 2 boys 13 & 15 are each getting an AX10 for christmas so they will be modding them I;m sure. Mostly going to be crawling around the farm and Coronado Heights and Kanopolis lake.

lemme know when that Wraith gets here, we'll have to have a GTG up at coronado heights before the winter hits...? i've been wanting to get up there for a while now, just haven't had the time...

Docwolf · 11-15-2011, 11:41 AM

count ,me in. radio question, i am running 27Mhz, should i pick some different crystals, or am i like the only person not running spread spectrum LOL

lowboy · 11-15-2011, 11:46 AM

Snail mail says it well be here monday. Then I have to tear it down and locktight everthing that needs it. So it should be up and running by wensday or thursday next week. I ordered 2 AX10 RTC yesterday for my boys for Christmas, I know when they get to drive the Wraith I wont hear the end of it that they want there owen.

lowboy · 11-16-2011, 12:50 PM

Scored a Bully roller with built axles. Its my brother n laws old comp rig. He sold to to a friend of owers, and he never did anything with it so he is tradeing me some hunting stuff for it. Now I think I'll leave the Wraith to more of a trail rig, and the Bully is only a crawler.

Docwolf · 11-16-2011, 02:40 PM

nicccce

Docwolf · 11-20-2011, 02:04 PM

just posted some new pics in the Redcat gallery, bottom of the thread

http://www.rccrawler.com/forum/redca...gallery-8.html

lowboy · 11-21-2011, 10:32 AM

Well if my truck dosnt show up some I wont be able to go crawlin this weekend. I ordered it on the 11th and it still isnt here, and tracking says the same thing as the first day, heading to sorting facility. I ordered my boys trucks from the same place a few days after i ordered mine and they were here in 3 days. I'm afraid that USPS lost my truck.

11-10-2011, 02:57 AM	#104
lil wasted Pebble Pounder Join Date: Dec 2009 Location: salina,ks Posts: 151	hoping would love to crawl with u guys but i am just now starting on my first scaler, and im not that far into it this is all i have right now going to make a tuber and put some of the spray on bedliner all over the cab with a full interior. hoping to use t-rex 60 axles, RC4WD Disruptor Ultra Compact Planetary , and a RC4WD Killer Transfer Case, and headlight and taillights, anybody got any good ideas for me let me know thanks for reading.

11-10-2011, 05:43 PM	#106
lil wasted Pebble Pounder Join Date: Dec 2009 Location: salina,ks Posts: 151	Newbright Its a newbright,its actualy a 1/12 scale

11-10-2011, 09:11 PM	#108
lil wasted Pebble Pounder Join Date: Dec 2009 Location: salina,ks Posts: 151	Thanks Thanks for the tip I forgot about the maxstone 16 rock crawler, i thnk i might go in that direction. Thanks again

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2011, 09:29 PM	#102
FlightInstrukta Master Rocksmith... Join Date: Jun 2011 Location: Salina Posts: 524	new whip stuntin...

11-04-2011, 09:38 PM	#103
Hydro-Tank RCC Addict Join Date: Nov 2007 Location: - Posts: 1,134	What, only two shots of that beast? haha. Looks cool bud. Wish I had mine going.

11-10-2011, 04:46 PM	#105
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	what is this body from???

11-10-2011, 07:42 PM	#107
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	you could proly go with a 1/18 crawler for a good scaler look, check out a post in the red cat rs10 forum for a threaded called beaver bus, should give you some good ideas.

11-12-2011, 12:46 AM	#109
lil wasted Pebble Pounder Join Date: Dec 2009 Location: salina,ks Posts: 151	Is there any hobbie shops in salina except dons

11-12-2011, 10:21 AM	#110
S-towncrawler Newbie Join Date: Jun 2011 Location: in da stix Posts: 39	nope just the place in minnicrapolis at the mower shop they got a few odds and ends mostly traxxas stuff. they're into short course circle track racing over threre

11-12-2011, 12:38 PM	#111
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	yeah i went into dons looking for crawler stuff and the old lady looked at me like i was certified insane. she had never herd of any such thing.

11-12-2011, 04:00 PM	#112
lil wasted Pebble Pounder Join Date: Dec 2009 Location: salina,ks Posts: 151	Ya same way for me, thanks for the info

11-13-2011, 03:56 PM	#113
lowboy Newbie Join Date: Jun 2004 Location: Lindsborg Kansas Posts: 40	I'm just south of Lindsborg a couple miles. Just getting back into RC's after many years off. Just ordered a Wraith that should be here this week and my 2 boys 13 & 15 are each getting an AX10 for christmas so they will be modding them I;m sure. Mostly going to be crawling around the farm and Coronado Heights and Kanopolis lake.

11-15-2011, 11:41 AM	#115
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	count ,me in. radio question, i am running 27Mhz, should i pick some different crystals, or am i like the only person not running spread spectrum LOL

Sponsored Links

11-15-2011, 11:46 AM	#116
lowboy Newbie Join Date: Jun 2004 Location: Lindsborg Kansas Posts: 40	Snail mail says it well be here monday. Then I have to tear it down and locktight everthing that needs it. So it should be up and running by wensday or thursday next week. I ordered 2 AX10 RTC yesterday for my boys for Christmas, I know when they get to drive the Wraith I wont hear the end of it that they want there owen.

11-16-2011, 12:50 PM	#117
lowboy Newbie Join Date: Jun 2004 Location: Lindsborg Kansas Posts: 40	Scored a Bully roller with built axles. Its my brother n laws old comp rig. He sold to to a friend of owers, and he never did anything with it so he is tradeing me some hunting stuff for it. Now I think I'll leave the Wraith to more of a trail rig, and the Bully is only a crawler.

11-16-2011, 02:40 PM	#118
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	nicccce

11-20-2011, 02:04 PM	#119
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	just posted some new pics in the Redcat gallery, bottom of the thread http://www.rccrawler.com/forum/redca...gallery-8.html

11-21-2011, 10:32 AM	#120
lowboy Newbie Join Date: Jun 2004 Location: Lindsborg Kansas Posts: 40	Well if my truck dosnt show up some I wont be able to go crawlin this weekend. I ordered it on the 11th and it still isnt here, and tracking says the same thing as the first day, heading to sorting facility. I ordered my boys trucks from the same place a few days after i ordered mine and they were here in 3 days. I'm afraid that USPS lost my truck.

RCCrawler Forums

Thread: Salina Area Crawling