RCCrawler Forums

crawliestsalinan · 06-25-2013, 12:54 PM

Thanks to Matt I got some axles for my Wraith (thank you by the way). all i need now is two more shocks and a few more links and a tranny. I CAN"T WAIT!!!

grob23 · 06-25-2013, 04:55 PM

Lookin good!

Fully jealous though... I wanna get a wraith together so bad!

MacJamez · 06-25-2013, 07:57 PM

Hellz yea!!

crawliestsalinan · 06-29-2013, 07:33 AM

Thanks guys i'm pretty pumped to get this thing goin...

grob23 · 06-30-2013, 09:05 AM

Any updates? What rolling stock are ya gonna run? Electronics?

I finally found a chassis!

crawliestsalinan · 07-01-2013, 07:55 AM

Quote:

Originally Posted by grob23

Any updates? What rolling stock are ya gonna run? Electronics?

I finally found a chassis!

HAHAHA nice!!! As for rolling stock if you mean tires i'm goin with some rc4wd 2.2 things i can't remember the name on rc4wd steelys. electronics i'm runnin an FX-R with 45t motor, and i a hitec servo.

P.S. we have a wraith kit at the shop we been parting out so if you need somethin just let me know....

grob23 · 07-01-2013, 08:19 AM

I think I'm set for Wraith parts... Jerry at DMG hooked me up!

Dang man, get some more pics up! Haha, when will this be operational?

crawliestsalinan · 07-01-2013, 08:30 AM

Ohh ok did he hook ya up with some good parts??? And idk when it will be operational i gotta wait till dustin can order parts for it so it might still be awhile. hopefully not any later than mid august tho. and the tires are rc4wd dune x/t's just remembered (looked em up HAHA

)

grob23 · 07-01-2013, 10:39 AM

I basically got an entire stock chassis. It's all I'll need to get going though

That front bumper looks good too

crawliestsalinan · 07-01-2013, 11:45 AM

O nice haha well you'll prolly be up and runnin before me haha and thanks i like it too

crawliestsalinan · 07-03-2013, 09:17 AM

WOOOOOOOOOOOOO!!!! got a tranny on the way!!!!!!!!!!!! HEck ya one step closer

crawliestsalinan · 07-06-2013, 01:38 PM

There it is!!! can't wait to get it installed.

grob23 · 07-06-2013, 05:36 PM

I ran an R2 trans for a while (and eventually an R2D) and the beefiness is great! They're a bit louder than the Axial transmission though...

My "Wraith" is up and running (check out the 2.2 scale section), but I will admit that yours will be much more badass! (Especially from an axle standpoint)

FlightInstrukta · 07-06-2013, 07:24 PM

Quote:

Originally Posted by crawliestsalinan

there it is!!! Can't wait to get it installed.

😔...

crawliestsalinan · 10-12-2013, 08:19 AM

Well after few months of dry time I've started to buy parts for my wraith. So far I've got axles, a tranny, the rest of my shocks, vp links, two sets of wheels and tires. Now all I need is the innards for the axles and the electronics also I need the bearings, chubs, and knuckles... I'd post pics but its givin me problems i'll try again here in a bit

grob23 · 10-12-2013, 04:21 PM

My god! Those axles are pure sex!

crawliestsalinan · 10-12-2013, 05:38 PM

Right they're pretty sexy

crawliestsalinan · 10-12-2013, 09:13 PM

Well got the axles mounted... as you can see. need to run to the hardware store tomorrow to get a few bolts and screws for the tranny to get it in...but all is goin well.

MacJamez · 10-13-2013, 09:16 PM

When your ready let me know and I'll go crawl with ya.

FlightInstrukta · 10-13-2013, 09:37 PM

When your ready let me know, I'll buy those axles from ya? 😎 Lookin good!!!

06-25-2013, 12:54 PM	#1
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Almost Done!!! Thanks to Matt I got some axles for my Wraith (thank you by the way). all i need now is two more shocks and a few more links and a tranny. I CAN"T WAIT!!! Attached Images

06-25-2013, 04:55 PM	#2
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! Lookin good! Fully jealous though... I wanna get a wraith together so bad!

06-25-2013, 07:57 PM	#3
MacJamez Pebble Pounder Join Date: Jun 2011 Location: Salina Posts: 139	Re: Almost Done!!! Hellz yea!!

06-29-2013, 07:33 AM	#4
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Re: Almost Done!!! Thanks guys i'm pretty pumped to get this thing goin...

06-30-2013, 09:05 AM	#5
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! Any updates? What rolling stock are ya gonna run? Electronics? I finally found a chassis!

07-01-2013, 08:19 AM	#7
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! I think I'm set for Wraith parts... Jerry at DMG hooked me up! Dang man, get some more pics up! Haha, when will this be operational?

07-01-2013, 08:30 AM	#8
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Re: Almost Done!!! Ohh ok did he hook ya up with some good parts??? And idk when it will be operational i gotta wait till dustin can order parts for it so it might still be awhile. hopefully not any later than mid august tho. and the tires are rc4wd dune x/t's just remembered (looked em up HAHA)

07-01-2013, 10:39 AM	#9
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! I basically got an entire stock chassis. It's all I'll need to get going though That front bumper looks good too

07-01-2013, 11:45 AM	#10
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Re: Almost Done!!! O nice haha well you'll prolly be up and runnin before me haha and thanks i like it too

07-03-2013, 09:17 AM	#11
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Re: Almost Done!!! WOOOOOOOOOOOOO!!!! got a tranny on the way!!!!!!!!!!!! HEck ya one step closer

07-06-2013, 01:38 PM	#12
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Re: Almost Done!!! There it is!!! can't wait to get it installed. Attached Images

07-06-2013, 05:36 PM	#13
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! I ran an R2 trans for a while (and eventually an R2D) and the beefiness is great! They're a bit louder than the Axial transmission though... My "Wraith" is up and running (check out the 2.2 scale section), but I will admit that yours will be much more badass! (Especially from an axle standpoint)

10-12-2013, 08:19 AM	#15
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Well after few months of dry time I've started to buy parts for my wraith. So far I've got axles, a tranny, the rest of my shocks, vp links, two sets of wheels and tires. Now all I need is the innards for the axles and the electronics also I need the bearings, chubs, and knuckles... I'd post pics but its givin me problems i'll try again here in a bit Attached Images

10-12-2013, 04:21 PM	#16
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Re: Almost Done!!! My god! Those axles are pure sex!

10-12-2013, 05:38 PM	#17
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Right they're pretty sexy

Sponsored Links

10-12-2013, 09:13 PM	#18
crawliestsalinan Newbie Join Date: Sep 2012 Location: salina Posts: 24	Well got the axles mounted... as you can see. need to run to the hardware store tomorrow to get a few bolts and screws for the tranny to get it in...but all is goin well. Attached Images

10-13-2013, 09:16 PM	#19
MacJamez Pebble Pounder Join Date: Jun 2011 Location: Salina Posts: 139	Re: Almost Done!!! When your ready let me know and I'll go crawl with ya.

10-13-2013, 09:37 PM	#20
FlightInstrukta Master Rocksmith... Join Date: Jun 2011 Location: Salina Posts: 524	Re: Almost Done!!! When your ready let me know, I'll buy those axles from ya? 😎 Lookin good!!!

RCCrawler Forums

Thread: Almost Done!!!