Freedom!!!!!!
 

I am being allowed to spend a few hours up at Coronado. Heading up around 1. Will be there till I get called home, run out of batteries or break both rigs!





Sent from my RM-845_nam_vzw_100 using Tapatalk

Re: Freedom!!!!!!
 

Well? ??? How'd the crawling go Adam?

Really well. Got a full set of packs through the dual ESC MOA and Bronc ran like a champ.

Sent from my SCH-I545 using Tapatalk

How'd you like Coronado, haven't been up there yet. Do you have any pics?


Sent from my iPhone using Tapatalk

Coronado is great, I live in Lindsborg so I go up there constantly. I snapped a couple of scrap heap in action, will post them later today.

Sent from my SCH-I545 using Tapatalk

Re: Freedom!!!!!!
 

I climbed the rock like it was nothing, drove down the spine, found a deep gouge that i waddled down.

http://i1169.photobucket.com/albums/...ps015ce669.jpg

http://i1169.photobucket.com/albums/...pse3bd83c5.jpg

planning on De-lugging the tires and maybe finding some softer foam down the road.

That looks like some great rock sections. I can't wait to get out there.


Sent from my iPhone using Tapatalk

Re: Freedom!!!!!!
 

seesm like i don't have a lot of pics from there.......

7-7-2012 Coronado Photos by Adam_Wade_Ackerman | Photobucket

http://s1169.photobucket.com/user/Ad...-12%20crawling

Going up again today to test out my delugged swappers. Will head up around 1 again.


Sent from my RM-845_nam_vzw_100 using Tapatalk

Swappers work great!

Bronc is down though, broke the passenger side chub. Hope to order parts on the 30th, but if that don't come through does anyone have a spare I could barrow for the 7th?

Sent from my SCH-I545 using Tapatalk

Re: Freedom!!!!!!
 

What axle does it need to suit.

That is helpful info huh? Lol

Ax10

Sent from my SCH-I545 using Tapatalk

Re: Freedom!!!!!!
 

Will ar60 chubs work... if so ive got a set you could use

Re: Freedom!!!!!!
 

I think they will fit, but you have to mod the housing for it to work....

Re: Freedom!!!!!!
 

so i found another technical line. south east corner, upper trail just below the road.

http://i1169.photobucket.com/albums/...psa026e43e.jpg

http://i1169.photobucket.com/albums/...ps09172fb9.jpg

http://i1169.photobucket.com/albums/...ps50ff57c3.jpg

http://i1169.photobucket.com/albums/...psa41919a2.jpg

http://i1169.photobucket.com/albums/...pse02daf9f.jpg

http://i1169.photobucket.com/albums/...psba10ee17.jpg

http://i1169.photobucket.com/albums/...ps24365250.jpg

Now it took 5 "hands of God" to get up and around this, but i think i could knock two of those off with new wheels. My Hubs are slipping pretty bad now and my front drive pin has a ton of slop in it.

Doubt i have any of that resolved before the 7th.

Re: Freedom!!!!!!
 

Correction, i need for the SCX10 axles. i forgot the AX10 is a splined hub.