RCCrawler Forums

ChiefWigman · 06-01-2011, 01:49 AM

Shawnee here... not entirely new to RC's but always had issues with keeping one together and running. Have a micro rock crawler hehe.. know any good crawl spots around JoCo?

MisterFubar · 06-13-2011, 12:11 AM

Gardner here, but currently on Sabbatical in the Himalayas.

Been into RC off and on for years starting with an original RC10 and Ultima II and working my way through various stadium trucks, buggies and onroad stuff. I'm thinking I need to get a crawler to help pass some of the time here and take advantage of some of the varied terrain I've got to play with.

Hotrodblder · 06-15-2011, 05:40 PM

Quote:

Originally Posted by ksbronco

I am newbie to the RC stuff, crawled 1:1 for years, but been out of that for 4 years or so now, and just got a Summit. I know most probably don't consider that a crawler, but its a lot of fun.
I am in Minneapolis, we just got a new hobby shop in town, so we can blame them for my new addiction!

Minneapolis, Ks has a hobby shop!?!?!?

Hotrodblder · 06-15-2011, 05:45 PM

Dogbones & Lowboy, look me up on here and maybe we can gtg and hang out or chat more. I've got a couple of friends in the McP area and a friend here in Salina that crawl. My personal rig is still in the construction stage due to my stupid job, but it's getting closer. I've also got a 1:1 I'm trying to fix, too.

grob23 · 06-15-2011, 07:05 PM

Shawn, any progress on a scaler? I pretty much just gotta throw in electronics and I'll be ready to start body work... (but I'll still run it...)

Hotrodblder · 06-22-2011, 04:17 PM

Still a roller in progress. There are a few things I would like to have before it's drive-able. Paychecks are running a little short after bills, so it's taking a little longer AND I want to get the 1:1 fixed, too. So it might be a little longer yet. I HAVE however started on the back yard, so when I finish knocking things down and get a chipper shredder we can have a rock stacking party. I might even feed the helpers, hint, hint, nudge, nudge.

grob23 · 06-23-2011, 03:43 PM

I'll hella help! Haha, gotta get to work on my scaler! Just lemme know when

FlightInstrukta · 06-30-2011, 11:45 PM

so i feel compeled to say whats up to hotrodbuilder... im in salina as well, and am currently building a course in my backyard too... we should get together some time and test rigs against each others, when its not so hot out... and also, i have a ton of crawler parts, if u need somthing to get up n runnin, lemme know, i might have what u need?

rjubber · 07-05-2011, 09:08 AM

I wanted to say hey. I am outside of Lawrence. I travel to Salina and Manhattan for work a few times a month. I am new to RC's, I have only had mine for about three weeks (Axial AX10 RTC). I have already started tweaking it, I have the parts ordered to 4 link it.
Look forward to learning from the information here.

RJ

MacJamez · 07-08-2011, 10:28 AM

I'm in tha Salina area if anyone wants to crawl.

Jungle Man · 08-04-2011, 05:19 PM

I am in the Army and I am suppose to move to Ft Riley Kansas in July 2012. I am just checking out the forum trying to figure out where to crawl when I get there. If any of you guys in the Ft Riley area are still trying to get a group together next summer I will be in. I hope to meet some of you guys then.

Docwolf · 08-04-2011, 05:31 PM

whats this about a hobby shop in minni????

Burntnuts · 08-04-2011, 07:40 PM

Jungle Man:
I know this will get lost by that time but there is a great hobby shop just outside the East gate( I think). Its on 7th street in Junction City.
Never had my scaler with me when im there but there are tons of cool spots in and around Riley.

Topekacrawls · 08-09-2011, 12:02 PM

Hey all.

I'm in Topeka. I have an XR10 and a couple custom rigs. We should plan a get together this month.

dezfan · 08-09-2011, 12:22 PM

I'm in Topeka...for the next 72 hours.

grob23 · 08-09-2011, 03:47 PM

Quote:

Originally Posted by dezfan

I'm in Topeka...for the next 72 hours.

I wish I only had to stay in Kansas for 72 hours...

S-towncrawler · 08-10-2011, 03:34 PM

Im in salina. as for the Minneapolis hobby shop they are mostly all short course, but if u need misc. parts they might be able to help. they pretty much run all traxxas stuff up there

Hydro-Tank · 08-10-2011, 04:15 PM

Quote:

Originally Posted by Topekacrawls

Hey all.

I'm in Topeka. I have an XR10 and a couple custom rigs. We should plan a get together this month.

Where would we meet?

This is about to be my truck. What you guys think?

S-towncrawler · 08-10-2011, 04:21 PM

nice rig!

ElBandito · 02-10-2012, 02:28 PM

I moved up from Andover to Mac last May. New to crawlers, but not RC's

I have a Wraith and my daughter has a ECX Smash that we put a 3800 KV BL sytem in. That's gotta be the fastest Smash around.

08-04-2011, 05:19 PM	#51
Jungle Man Newbie Join Date: May 2011 Location: Schweinfurt Germany Posts: 39	New to Kansas I am in the Army and I am suppose to move to Ft Riley Kansas in July 2012. I am just checking out the forum trying to figure out where to crawl when I get there. If any of you guys in the Ft Riley area are still trying to get a group together next summer I will be in. I hope to meet some of you guys then.

02-10-2012, 02:28 PM	#60
ElBandito Pebble Pounder Join Date: Jan 2012 Location: McPherson Posts: 165	Re: Kansas is Dialed I moved up from Andover to Mac last May. New to crawlers, but not RC's I have a Wraith and my daughter has a ECX Smash that we put a 3800 KV BL sytem in. That's gotta be the fastest Smash around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-01-2011, 01:49 AM	#41
ChiefWigman Pebble Pounder Join Date: Apr 2011 Location: KC Posts: 93	Shawnee here... not entirely new to RC's but always had issues with keeping one together and running. Have a micro rock crawler hehe.. know any good crawl spots around JoCo?

06-13-2011, 12:11 AM	#42
MisterFubar Rock Stacker Join Date: Jun 2009 Location: Olathe, KS Posts: 70	Gardner here, but currently on Sabbatical in the Himalayas. Been into RC off and on for years starting with an original RC10 and Ultima II and working my way through various stadium trucks, buggies and onroad stuff. I'm thinking I need to get a crawler to help pass some of the time here and take advantage of some of the varied terrain I've got to play with.

06-15-2011, 05:45 PM	#44
Hotrodblder Quarry Creeper Join Date: Nov 2007 Location: Kansass Posts: 361	Dogbones & Lowboy, look me up on here and maybe we can gtg and hang out or chat more. I've got a couple of friends in the McP area and a friend here in Salina that crawl. My personal rig is still in the construction stage due to my stupid job, but it's getting closer. I've also got a 1:1 I'm trying to fix, too.

06-15-2011, 07:05 PM	#45
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	Shawn, any progress on a scaler? I pretty much just gotta throw in electronics and I'll be ready to start body work... (but I'll still run it...)

06-22-2011, 04:17 PM	#46
Hotrodblder Quarry Creeper Join Date: Nov 2007 Location: Kansass Posts: 361	Still a roller in progress. There are a few things I would like to have before it's drive-able. Paychecks are running a little short after bills, so it's taking a little longer AND I want to get the 1:1 fixed, too. So it might be a little longer yet. I HAVE however started on the back yard, so when I finish knocking things down and get a chipper shredder we can have a rock stacking party. I might even feed the helpers, hint, hint, nudge, nudge.

06-23-2011, 03:43 PM	#47
grob23 RCC Addict Join Date: Nov 2005 Location: Kansas Posts: 1,280	I'll hella help! Haha, gotta get to work on my scaler! Just lemme know when

06-30-2011, 11:45 PM	#48
FlightInstrukta Master Rocksmith... Join Date: Jun 2011 Location: Salina Posts: 524	so i feel compeled to say whats up to hotrodbuilder... im in salina as well, and am currently building a course in my backyard too... we should get together some time and test rigs against each others, when its not so hot out... and also, i have a ton of crawler parts, if u need somthing to get up n runnin, lemme know, i might have what u need?

07-05-2011, 09:08 AM	#49
rjubber Newbie Join Date: Jun 2011 Location: Eudora Posts: 0	I wanted to say hey. I am outside of Lawrence. I travel to Salina and Manhattan for work a few times a month. I am new to RC's, I have only had mine for about three weeks (Axial AX10 RTC). I have already started tweaking it, I have the parts ordered to 4 link it. Look forward to learning from the information here. RJ

07-08-2011, 10:28 AM	#50
MacJamez Pebble Pounder Join Date: Jun 2011 Location: Salina Posts: 139	I'm in tha Salina area if anyone wants to crawl.

08-04-2011, 05:31 PM	#52
Docwolf RCC Addict Join Date: Jun 2011 Location: Lindsborg Posts: 1,708	whats this about a hobby shop in minni????

Sponsored Links

08-09-2011, 12:22 PM	#55
dezfan I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK. Posts: 12,563	I'm in Topeka...for the next 72 hours.

08-04-2011, 07:40 PM	#53
Burntnuts Pebble Pounder Join Date: Jul 2009 Location: Fort scott Posts: 174	Jungle Man: I know this will get lost by that time but there is a great hobby shop just outside the East gate( I think). Its on 7th street in Junction City. Never had my scaler with me when im there but there are tons of cool spots in and around Riley.

08-09-2011, 12:02 PM	#54
Topekacrawls Newbie Join Date: Aug 2011 Location: Topeka Posts: 28	Hey all. I'm in Topeka. I have an XR10 and a couple custom rigs. We should plan a get together this month.

08-10-2011, 03:34 PM	#57
S-towncrawler Newbie Join Date: Jun 2011 Location: in da stix Posts: 39	Im in salina. as for the Minneapolis hobby shop they are mostly all short course, but if u need misc. parts they might be able to help. they pretty much run all traxxas stuff up there

08-10-2011, 04:21 PM	#59
S-towncrawler Newbie Join Date: Jun 2011 Location: in da stix Posts: 39	nice rig!

RCCrawler Forums

Thread: Kansas is Dialed