RCCrawler Forums

snakeman · 03-05-2006, 08:29 PM

I have a pair of Twin axles, used but not abused. What they are worth? I don't use them, and decided that they will be sold in the future (this is not an offer to sell them, so don't post that you want to buy them!). What would be a fair price in your opinion? I was thinking around $100 but don't know if that would be too high or not.

I also have the trans for it. Same condition. A little scuffing on bottom but otherwise in great working condition. I have no idea what to charge. I don't want to rip people off, but at the same time don't want to get ripped off myself.

I have decided to cross over to the littler side of things and go TLT. All my friends are doing it, and they are cheaper to run and maintain.

Any help would be appreciated.

bandi · 03-08-2006, 06:35 PM

I have seen a them on Ebay recently for approx $110 each...

Robb · 03-08-2006, 06:40 PM

Quote:

Originally Posted by bandi

I have seen a them on Ebay recently for approx $110 each...

You can buy the whole truck for that much!

Probably $100-$130 for the pair would be about right amongst a crowd that knows what they are.

snakeman · 03-08-2006, 07:46 PM

Quote:

Originally Posted by Robb

You can buy the whole truck for that much!

Probably $100-$130 for the pair would be about right amongst a crowd that knows what they are.

I paid $219 for my complete truck from tower.

Thanks for the imput.

JohnRobHolmes · 03-08-2006, 09:45 PM

I would say $100- 130ish as well for a good set of twin axles. For the tranny $15-40 depending on what it comes with, and of course condition.

skipstr71 · 03-08-2006, 10:14 PM

Quote:

Originally Posted by johnrobholmes

I would say $100- 130ish as well for a good set of twin axles. For the tranny $15-40 depending on what it comes with, and of course condition.

That sounds about right...

rockspider · 03-09-2006, 04:13 AM

I'd say $100 for a couple of Twin axles, complete with drive hexes, bolts and input joke.
Twin axles have both soft Zama alloy ring and pinion, and those need upgrading to steel ones.
If they were Mad axles with 4 pinion diffs and steelies in the rear pumpkin $130 sounds good.

03-05-2006, 08:29 PM	#1
snakeman Pebble Pounder Join Date: May 2004 Posts: 189	Got a question for the twin guys. I have a pair of Twin axles, used but not abused. What they are worth? I don't use them, and decided that they will be sold in the future (this is not an offer to sell them, so don't post that you want to buy them!). What would be a fair price in your opinion? I was thinking around $100 but don't know if that would be too high or not. I also have the trans for it. Same condition. A little scuffing on bottom but otherwise in great working condition. I have no idea what to charge. I don't want to rip people off, but at the same time don't want to get ripped off myself. I have decided to cross over to the littler side of things and go TLT. All my friends are doing it, and they are cheaper to run and maintain. Any help would be appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-08-2006, 06:35 PM	#2
bandi Rock Stacker Join Date: Feb 2006 Location: Brick Posts: 73	I have seen a them on Ebay recently for approx $110 each...

03-08-2006, 09:45 PM	#5
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	I would say $100- 130ish as well for a good set of twin axles. For the tranny $15-40 depending on what it comes with, and of course condition.

03-09-2006, 04:13 AM	#7
rockspider Quarry Creeper Join Date: Nov 2005 Location: Italy Posts: 262	I'd say $100 for a couple of Twin axles, complete with drive hexes, bolts and input joke. Twin axles have both soft Zama alloy ring and pinion, and those need upgrading to steel ones. If they were Mad axles with 4 pinion diffs and steelies in the rear pumpkin $130 sounds good.

Sponsored Links

RCCrawler Forums

Thread: Got a question for the twin guys.