Kyosho FO-XX VE questions First let me apologize for another thread on this truck. I want to buy one badly but I am not able to find many parts for these.. Is it a truck that just didn't take off and nobody is stocking parts or are they discontinuing it. I know it's basically a Mad Force but, I can't even find the stock tires for the FO-XX. Please someone chime in and tell me where parts are.. I've tried Google, Ebay, Kyosho America, all of the online stores I know of. Also, I did find some stuff but it's all out of stock when I do find something. |
Re: Kyosho FO-XX VE questions What is it you want parts or the truck? The diffs are 1/8 scale buggy and yes it's mad force compatible. As far as aftermarket you are pretty much out of luck beside supershafty. I have 4 trucks with mf axles and most of the stuff is home built except for the supershafty shark fin and spools. Drivetrain are pretty stout if kept at 4s and under. I have ran 6s but it's hard to handle. I just searched ebay and there are 9 U.S. listings and about 35 foreign listings. If looking for mods search Mad force more results. |
Re: Kyosho FO-XX VE questions This is why I have yet to buy one of these rigs...would be nice if a few aftermarket companies would take interest in Kyosho...imagine a blinded out blizzard, but I think it may be a lost cause. Break out the mill and the Dremel! |
Re: Kyosho FO-XX VE questions Quote:
|
Re: Kyosho FO-XX VE questions Is it your first rc? Ebay has loads of parts just don't know how long that source will last for parts. The mad force is by far my favorite rc but parts can be hard to find. |
Re: Kyosho FO-XX VE questions Quote:
|
Re: Kyosho FO-XX VE questions Not much out there supershafty, thundertech racing, some old new era model stuff thats about it. Stock axles hold up to just about anything except trees and cars. |
Re: Kyosho FO-XX VE questions Quote:
|
Re: Kyosho FO-XX VE questions Even here in japan parts can be hard to find. Was going to get my son a kyosho madbug. But most of the rc shops here have no parts in stock. order only, dont know how long it will take. I was thinking about the FO-XX too. its easier to send away for axial parts than get what kyosho parts I am looking for here. (quicker too) |
Re: Kyosho FO-XX VE questions They are awesome rigs, I love mine. You won't need parts as much as you think. I've driven it like I stole it for 5 months now and the only damage I've done is I snapped the rear driveshaft on a bad landing from a huge jump. Replace all the hardware ASAP with self-locking nuts and it will run forever. A few suggested mods: Move the batteries over the front axle. http://uploads.tapatalk-cdn.com/2016...15c29d7dd2.jpg http://uploads.tapatalk-cdn.com/2016...a6353211fa.jpg And the electronics box over the rear. http://uploads.tapatalk-cdn.com/2016...d3184e019e.jpg Also, fill the diffs with grease to get a better limited slip function. - Flash |
Re: Kyosho FO-XX VE questions If you want a better limited slip you should fill the diffs with silicone oil. I filled them on my Mad Force with 60.000wt oil |
Re: Kyosho FO-XX VE questions Quote:
|
Re: Kyosho FO-XX VE questions RC4WD have also started to manufacture some of their upgrades again. Sent from my LG-D802 using Tapatalk |
Re: Kyosho FO-XX VE questions You can modify the axles also. I will be installing some that will be using a 4 link so that the suspension works better. I also will be using a 2 speed Summit transmission that has the LEM dog carrier installed. I also after getting the system working build a carbon fiber chassis so that it's clean and light weight. the wheelbase will be longer and narrower also. http://i1379.photobucket.com/albums/...psu1icyuss.jpg http://i1379.photobucket.com/albums/...psaecp0srm.jpg The 1/8 TLR shocks will be used. I will be doing what Flash550 did with the lipos also. The servo will be mounted to the axle for the steering also. http://i1379.photobucket.com/albums/...pstsi0ccft.jpg |
All times are GMT -6. The time now is 09:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com