RCCrawler Forums

THnCS · 04-08-2008, 09:56 AM

Quote:

Originally Posted by TwistedXT

How much is this stuff by the foot/yard?

A whopping $.16/yd

I was going to go and get more this week, I will bring it to the scale comp on Saturday.

TwistedXT · 04-08-2008, 10:54 AM

150 lb test!!! BWAAAAHHAHAHHAHA BWAHAHAHAAHAH

TwistedXT · 04-08-2008, 08:38 PM

Just installed the Yeah Racing Dark Drifter 6 LED kit.. the Controller plug is too thick to fit in a Spektrum DX3 reciever.. some widdle work and it fit right in, then the led's work.. but the flash sequence does not... im waiting to hear back from Yeah racing and the 3rd party vendor that i bought them from to see what we can do.

Almighty Malach · 04-08-2008, 11:35 PM

These things are catching! Now I want to build a 1:6 scaler. Know anyone with a spare body they aren't using?

TwistedXT · 04-09-2008, 07:21 AM

http://www.rccrawler.com/forum/showt...89#post1133789

Scale_Crawler · 05-29-2008, 12:13 PM

r u willing to sell that f-350 body?

Scale_Crawler · 05-29-2008, 12:15 PM

ok nvm they rnt urs !!

TwistedXT · 05-29-2008, 01:00 PM

ive just searched and found those on ebay by searching "body" under radio controlled

TwistedXT · 08-01-2008, 09:01 AM

Small update..

Been busy

Parts installed:
Tamiya Cr-01 Beadlocks
Imex All Terrains
Flat Black Paint
Rear Stinger
Metal Rock Rails
150lb Test Fishing line for the Winch
Full Size Spare
Tow Chain
Sclae Pull Pal - which worked friggin great!

Pics from the last comp:

racerx · 08-01-2008, 09:50 AM

Looks sick Mike! That thing must be HUGE, the All T's look small.

TwistedXT · 08-01-2008, 01:22 PM

yeah.. im going to wiegh it one of these days. shes got some grunt to her! everyone loves how the body sounds when you scrape it against the rocks!

sweli · 08-01-2008, 01:28 PM

Hey Twisted XT,

Did you use the inside of the Nylint tires for the outside edge on the Revo wheels?
The inside (larger ID) bead fits without mod?

Isn't the outter bead ID smaller the the inside?
So you trimmed that bead out?

Can you post or email some pics of what you did?

THX!!

TwistedXT · 08-01-2008, 01:47 PM

trimmed the revo rim down to the width i desired, then trimmed the nylint tires to fit.. theres a lip you can follow to trim that worked out nicely. took glue to hold her in.. works good.

bmuzz1 · 08-01-2008, 09:05 PM

Man That thing is huge and cool!

I just built my Wife a 1/8th scale Jk 4dr 2.2...and I thought that was big.

needtocrawl · 08-20-2008, 10:40 PM

thats cool, tires are too small, or lower it a bit.

run2jeepn · 08-26-2008, 11:43 PM

Update with the new wheels and tires?

Mnster · 08-27-2008, 12:29 AM

Yeah some revo or maxx rims would be the ticket. 2.2's are under a 14 inch rim to scale which is why they look tiny.

Also needs a fuzz more track width to give it some fill.

ae racer · 09-29-2008, 10:21 AM

i think that id go with the proline 30 series with badlands

here is the 30 series compared to a standard 2.2 on two different T4's

05-29-2008, 01:00 PM	#48
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	ive just searched and found those on ebay by searching "body" under radio controlled Last edited by TwistedXT; 05-29-2008 at 01:06 PM.

04-08-2008, 10:54 AM	#42
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	150 lb test!!! BWAAAAHHAHAHHAHA BWAHAHAHAAHAH

04-08-2008, 08:38 PM	#43
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	Just installed the Yeah Racing Dark Drifter 6 LED kit.. the Controller plug is too thick to fit in a Spektrum DX3 reciever.. some widdle work and it fit right in, then the led's work.. but the flash sequence does not... im waiting to hear back from Yeah racing and the 3rd party vendor that i bought them from to see what we can do.

04-08-2008, 11:35 PM	#44
Almighty Malach RCC Addict Join Date: Feb 2008 Location: Crawlerado Posts: 1,411	These things are catching! Now I want to build a 1:6 scaler. Know anyone with a spare body they aren't using?

04-09-2008, 07:21 AM	#45
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	http://www.rccrawler.com/forum/showt...89#post1133789

05-29-2008, 12:13 PM	#46
Scale_Crawler Quarry Creeper Join Date: May 2008 Location: Lafayette, Indiana Posts: 277	r u willing to sell that f-350 body?

05-29-2008, 12:15 PM	#47
Scale_Crawler Quarry Creeper Join Date: May 2008 Location: Lafayette, Indiana Posts: 277	ok nvm they rnt urs !!

08-01-2008, 09:01 AM	#49
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	Small update.. Been busy Parts installed: Tamiya Cr-01 Beadlocks Imex All Terrains Flat Black Paint Rear Stinger Metal Rock Rails 150lb Test Fishing line for the Winch Full Size Spare Tow Chain Sclae Pull Pal - which worked friggin great! Pics from the last comp:

08-01-2008, 09:50 AM	#50
racerx I wanna be Dave Join Date: Sep 2005 Location: R.I.P. Chip Posts: 2,024	Looks sick Mike! That thing must be HUGE, the All T's look small.

08-01-2008, 01:22 PM	#51
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	yeah.. im going to wiegh it one of these days. shes got some grunt to her! everyone loves how the body sounds when you scrape it against the rocks!

08-01-2008, 01:28 PM	#52
sweli RCC Addict Join Date: Jan 2008 Location: Lake Michigan Posts: 1,898	Hey Twisted XT, Did you use the inside of the Nylint tires for the outside edge on the Revo wheels? The inside (larger ID) bead fits without mod? Isn't the outter bead ID smaller the the inside? So you trimmed that bead out? Can you post or email some pics of what you did? THX!!

Sponsored Links

08-01-2008, 01:47 PM	#53
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	trimmed the revo rim down to the width i desired, then trimmed the nylint tires to fit.. theres a lip you can follow to trim that worked out nicely. took glue to hold her in.. works good.

08-01-2008, 09:05 PM	#54
bmuzz1 I wanna be Dave Join Date: Sep 2007 Location: San Tan Valley Posts: 4,267	Man That thing is huge and cool! I just built my Wife a 1/8th scale Jk 4dr 2.2...and I thought that was big.

08-20-2008, 10:40 PM	#55
needtocrawl Newbie Join Date: Feb 2008 Location: tulsa Posts: 48	thats cool, tires are too small, or lower it a bit.

08-26-2008, 11:43 PM	#56
run2jeepn I wanna be Dave Join Date: Sep 2005 Location: USA Posts: 11,196	Update with the new wheels and tires?

08-27-2008, 12:29 AM	#57
Mnster MWRCA'er Join Date: Apr 2004 Location: Machesney Park IL Posts: 3,995	Yeah some revo or maxx rims would be the ticket. 2.2's are under a 14 inch rim to scale which is why they look tiny. Also needs a fuzz more track width to give it some fill.

09-29-2008, 10:21 AM	#58
ae racer Rock Crawler Join Date: Sep 2008 Location: Bakersfield Posts: 688	i think that id go with the proline 30 series with badlands here is the 30 series compared to a standard 2.2 on two different T4's

RCCrawler Forums

Thread: Score!!!! Project 1/6th Jeep Rescue