Scale fj.
 

Well might be a long time in completion but it starts with revo driveshafts, axial ax10 tranny, xtm x factor axles, and probably a k2-3s chassis when i decide to order it."thumbsup". Well, its between an fj and a blazer.

Are you planning on making a body or using one off of something else?

Well it was either make something along the lines of this.http://image.4wdandsportutility.com/...hid_lights.jpg

Or just the pro line blazer. http://h1073519.hobbyshopnow.com/Pro...324460-450.jpg

Right now is more of the planning and gathering parts stage.

Keep us posted
 

You can go wrong with either one. Just keep us posted with pics when your done with your build."thumbsup"

You got it. so far i have the drive shafts, axles, wheels and tires, receiver, and the esc(mamba max). now its time to make some $$ for the tranny, chassis and body. i'll buy the tranny first then the chassis cause i might just make one.

Wheel base: around 14.5in

ANd i dont now how im gonna post pics since they are on my computer and i cant post attachments since i dont have a star so im still tryen to figure out that one.

You can host your pics at http://photobucket.com/ and post them from there. It's free and works for me. :)

Wrong forum, this one is for bigger than 1:10.

would i have to hhave a longer wheelbase to qualifie as 1/8 or 1/6.

http://s682.photobucket.com/albums/v...t=PICT0077.jpg

http://s682.photobucket.com/albums/v...t=PICT0073.jpg

http://s682.photobucket.com/albums/v...t=PICT0078.jpg

sorry for the crappy pics, camera aint the best.

Fixed it for ya.

Thanks man, thats what i was looken for.

Well once again i changed my mind do to the lack of aluminum on hand. it is now goin to be a truggy. We'll see how it goes.

http://i682.photobucket.com/albums/v...n/PICT0080.jpg

A little update. i got the front and rear shocks on, along with some rear tubing. Front shocks are on there only until i get some more tubing for new shock towers and then some piggy backs from rc4wd. The rear tubing needs alittle work but i seriously need to find something to bend this tubing with rather then my hands and a vice.
http://i682.photobucket.com/albums/v...n/PICT0084.jpg
http://i682.photobucket.com/albums/v...n/PICT0087.jpg
http://i682.photobucket.com/albums/v...n/PICT0092.jpg
http://i682.photobucket.com/albums/v...n/PICT0091.jpg
As you can see the servo isnt atached yet. so yeah. :roll:

http://i682.photobucket.com/albums/v...n/PICT0094.jpg

http://i682.photobucket.com/albums/v...n/PICT0093.jpg

Well here is it so far, body is there until i get a silverado body or something. I still have to build new front shock towers paint the chassis and once i get the body finish the back part of the truck. and the tape measure inside the back is only there cause i was trying to determine the height of the body.