Project : Mercedes 4450 Hi, Started a few months ago with this project. I had this idea since some time and finally I started to build it. At this moment I am testing with first engine/gear set up. I still don't know if am going to use a 3 speed gear box. I don't want a fast truck. I want it to be good in off road. chassis is from rc-laserparts axle : TLT shocks : tamiya terra crusher (they need a softer spring) supension : JunFac Gear : RC4WD Transfer : RC4WD truckcabine : WEDICO lenght chassis 620 mm Top look http://i1001.photobucket.com/albums/...wnchassisH.jpg http://i1001.photobucket.com/albums/...wnchassisD.jpg http://i1001.photobucket.com/albums/...wnchassis2.jpg Rear Look http://i1001.photobucket.com/albums/...wnchassisG.jpg Killer transfer http://i1001.photobucket.com/albums/...wnchassisI.jpg Planetary gear box withLRP Crawler 55T http://i1001.photobucket.com/albums/...wnchassisK.jpg Front supension http://i1001.photobucket.com/albums/...wnchassisL.jpg Side look http://i1001.photobucket.com/albums/...wnchassisM.jpg |
Looks like its gunna be really nice, great start. Lets talk about those drive shafts, haha I really like them. |
What is the base and scale of that Chevy you have sitting above ? |
Quote:
it's a RC4WD Trailfinder chassis with a modified Tamiya clodbuster body. look in this forum under 2.2 scale rigs Fall Guy project. Mike |
Really though I am trying to make my own drive shafts and they are not that nice could you give me some details on those? |
That is a good lookin truck, nice job. |
Quote:
I am using 1. 2 drive shafts of my old Tamiya Bruiser 2. 1 drive shafts of my sons Tamiya Toyota Hilux 3. 1 RC4WD 4. 1 drive shaft Tamiya CR01 (blue color) I bought on ebay But I am looking for the old Tamiya Bruiser ones on ebay. I can shorten the axle and these punishers allow a lot of flex ! Mike |
Beautiful Project Rig!!! |
Thanks a lot for the detail. |
great job, going to keep my eye on this one |
Looks very cool-- I want to build a multi axel rig "some day" eventually. Keep up the good work. |
Mercedes 4450 Hello, Some new updates. I moved my axles. They are to close to put 2.2 wheels and tires. I got my new soft suspension : gold ones are much softer than the blue ones. I found a RC4WD V2 HD transmission. So I can put 2 motors to one transmission. This will give anough power for this truck. Meanwhile I started to put the cabine from Wedico onto the chassis. It fits, but I nead to make some changes. Mike http://i1001.photobucket.com/albums/...e/P3280113.jpg http://i1001.photobucket.com/albums/...e/P3280112.jpg http://i1001.photobucket.com/albums/...e/P3280110.jpg |
Very nice truck, you have to lower the cabin for sure to have a more scale look.... but congratulations it is a very nice project. |
Holy hell thats huge, But looks great |
Mercedes 4450 Hello, I have been so busy for the last couple of weeks. I had to wait a long time for all other parts I orderd, due to the period it was not allowed for plains to fly over Europe (vulcano ash...) Anyway, I made a lot of progress. Mounted the servo's onto front axle. Got 2 crawler motors into the new gearbox. Had to replace the transfer gearbox. Due to this replacement, I had to reposition two axles.. ESC is tested First test run was OK. :ror: I'll try to put some pics in the next couple of days. Thx Mike |
Mercedes 4450 Oke, Some updates : I used parts of my old Wedico truck. Fitted chassis of this truck between my new chassis. This way I can use it to fit cabine.. on it, secondly it gives stability. You see the V2 Twin engine transmission from RC4WD with two Tamiya Crawler motors. Why the Tamiya ? They give enough Nmm and there RPM is higher than most other Crawler motors. http://i1001.photobucket.com/albums/...e/P5040110.jpg Next, is Killer Transfer Transmission from RC4WD. At first it was mounted horizontal. But due to my V2 transmission to have enough power I had to replace it vertical. Problem was how to mount it ? I used delrin, cutted out two blocks and made them to fit/follow shape of Killer transfer transmission. http://i1001.photobucket.com/albums/...e/P5070125.jpg Placed the cabine, so I can flip it open. Placed the air intake filters aswell as the exaust/cooler system. These all came from my Wedico truck. http://i1001.photobucket.com/albums/...e/P5070130.jpg Finally I started with the rear side. I still haven't decided what I am going to put on it. Same with tyres and rims... Also I am still looking for a softer spring. (71 mm long and diameter 14 mm) Anyway, I made two long U profiles with an alu plate on. About 50 cm long. http://i1001.photobucket.com/albums/...e/P5070131.jpg http://i1001.photobucket.com/albums/...e/P5070133.jpg More pics and details will follow. Mike |
Mercedes 4450 Some more pics of axle and transmission : First : how much do the axles move ? A lot, but I am still looking for a softer spring http://i1001.photobucket.com/albums/...e/P5080118.jpg Killer transfer transmission : main drive shaft and shaft going to front and rear axle. http://i1001.photobucket.com/albums/...e/P5080111.jpg First axle with servo : http://i1001.photobucket.com/albums/...e/P5080110.jpg First and second axle : http://i1001.photobucket.com/albums/...e/P5080112.jpg First and second axle from side view : http://i1001.photobucket.com/albums/...e/P5080116.jpg Oke, as you see still a lot of work to do. Mike |
First run outside Did my first run outside today. Lights, electronics work. First run to test if everything works. http://i1001.photobucket.com/albums/...e/P6130114.jpg http://i1001.photobucket.com/albums/...e/P6130113.jpg http://i1001.photobucket.com/albums/...e/P6130111.jpg Next step will be new tires and finishing body. Mike |
That is such a NICE cab! I think it would look much better if you lowered it some so there isn't 3 inches between the top of the tire and the wheel well. Bigger tires would help, but you just NEED to lower that body down some! Shorter shocks, while limiting your flex, would also lower that baby down. I know I wouldn't want to cut into a such nice($$) cab. I'm sure its a blast to drive anyways! I am working on my own 8x8 at the moment. Zack |
Mercedes 4450 Hello, finally my wheels and tyres came in well it's correct what the guys from RC4WD say : it takes some time to fix these Hummer wheels...took my each time about 30 minutes but the result is great check these new pics http://i1001.photobucket.com/albums/...e/DSC00239.jpg http://i1001.photobucket.com/albums/...e/DSC00241.jpg |
All times are GMT -6. The time now is 11:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com