Willy it be ??? Hi! everyone, just to lets you know that after reading through somes of the threads on this issues by many of you, i decided to tackle a somehow ''willy it be '' project. This going to be my first big project of this kind and i am a little anxious to start bare hand but i like a good challenge so up we go and more to follow. As you see on the picture i will attempt to convert this somewhat ''Subzero '' monster into the newly dragon 1:6 willy. You are welcome to provide me somes inputs and expertise if you so desire . Thanks, JEANROCK http://i743.photobucket.com/albums/x...JA/baja030.jpg |
Where did you find the model? |
Which one ? the scale 1:6 willy jeep i got from my local hobbystore for $ 99.95 CAD. The rig is a '' SUBZERO '' crawler from RC4WD. i got this one for a faver to someone and for very cheap. |
Ya i ment the Jeep. WHEW that must be one sick model. |
Finally i started my willy jeep project after gathering all my parts i started with the frame and mounted the axles, i used T-Rex 60 front and back. i also use RC4WD spring mounts brackets. Since i want to keep this jeep as original as possible (army style) i went with leaf springs. http://i743.photobucket.com/albums/x...CTjeep/005.jpg http://i743.photobucket.com/albums/x...CTjeep/004.jpg As for the transfer case, things went well , the case went on very smooth i only had to grind off some plastic to fit it in. http://i743.photobucket.com/albums/x...CTjeep/006.jpg http://i743.photobucket.com/albums/x...CTjeep/007.jpg Here is more of the model being assemble , i am surprise how easy this goes together so easely. http://i743.photobucket.com/albums/x...CTjeep/008.jpg One of the option i entend to had to my willy project is to have the steering wheel turning with the front servo. I look at mounting a small rc servo diredtly to the steering colum, so far it work as plan, check the photo. http://i743.photobucket.com/albums/x...project001.jpg While doing this mod, i decided to have a turning head at the same time so i modified the interior of a 1:6 doll as propose by a fellow member of this forum who showed me a sketch that really impress me to make on my project. I simply installed a small servo in the doll chess and a servo horn in his neck, works great. http://i743.photobucket.com/albums/x...project006.jpg http://i743.photobucket.com/albums/x...project009.jpg OK, back to the drawing board and more assembly, more to follow. |
Sweet lookin rig man. Just one question. How are you going to tighten the servo horn that you already glued to his head to the servo. ? |
Great Model....looks like you got it all worked out. Can you use the model's rims and tires? |
Quote:
|
Quote:
You will notice that the kit wheel that the rubber portion does not come off so i have to tape them for painting. http://i743.photobucket.com/albums/x...jeep/001-1.jpg |
sweet... this is gonna be nice |
Any updates, the rig looks sweet. |
Quote:
More to come.. |
Finally started to paint some of the assemblies starting with the chassis, wheels, and the main body. I choose olive drab from Tamiya great paint to apply and fast drying. I did not paint all of it green , kept some of the trani, axles, drive shaft ,etc.. , just to keep it more original. http://i743.photobucket.com/albums/x...jeep/001-2.jpg http://i743.photobucket.com/albums/x...jeep/002-1.jpg http://i743.photobucket.com/albums/x...jeep/003-1.jpg Now i am really in the re-assembly mode and things started to come together. More to come. |
Awesome work, even if you are from Canada. :flipoff: Attention to detail so far is top notch. Looking forward to seeing the finished model. |
Here is an update on my willy jeep project. I finally completed the painting portion of all my parts, i have started to re-assemble the jeep. Now i am in the electronic portion to arrange all the wiring, this include receiver, ESC, motor, flashing unit and all the lights etc.. http://i743.photobucket.com/albums/x...jeep/005-2.jpg http://i743.photobucket.com/albums/x...jeep/006-1.jpg I have started to scratchbuilt a trailer for the willy. I could not find a built one so i decided to built it. Awaiting the suspension an spare wheels on order. http://i743.photobucket.com/albums/x...jeep/003-2.jpg http://i743.photobucket.com/albums/x...jeep/008-1.jpg More to follow. |
Very nice. This thing is coming together nicely. I like the stock wheels. Trailer is sick too. "thumbsup" |
Quote:
|
Wow thats very cool! Pricey little model but it looks like its amazing detail wise. Please keep us updated, cant wait to see it up and runnin! Matt |
Quote:
|
Thats a great looking Jeep. Very good job!"thumbsup" |
All times are GMT -6. The time now is 09:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com